HAL_ChibiOS: fixed CubeSolo hwdef.dat

libraries/AP_HAL_ChibiOS/hwdef/CubeGreen-solo/hwdef.dat

@@ -8,4 +8,5 @@ include ../CubeBlack/hwdef.dat
 
 # pull Solo's default parameters from /Tools/Frame_params
 # these are parameters the Solo requires for proper operation that are different from the 4 standard defaults.
-env DEFAULT_PARAMETERS 'Tools/Frame_params/Solo_Copter-4_GreenCube.param'
+env DEFAULT_PARAMETERS Tools/Frame_params/Solo_Copter-4_GreenCube.param
+

libraries/AP_HAL_ChibiOS/hwdef/CubeSolo/hwdef.dat

@@ -12,7 +12,7 @@ SPIDEV icm20602_ext   SPI4 DEVID3  GYRO_EXT_CS  MODE3  4*MHZ  8*MHZ
 
 # pull Solo's default parameters from /Tools/Frame_params
 # these are parameters the Solo requires for proper operation that are different from the copter defaults.
-env DEFAULT_PARAMETERS 'Tools/Frame_params/Solo_Copter-4.param'
+env DEFAULT_PARAMETERS Tools/Frame_params/Solo_Copter-4.param
 
 # three IMUs, but allow for different varients. First two IMUs are
 # isolated, 3rd isn't

libraries/AP_HAL_ChibiOS/hwdef/skyviper-v2450/hwdef.dat

@@ -60,7 +60,7 @@ PA1 UART4_RX UART4 NODMA
 # use flash storage
 define STORAGE_FLASH_PAGE 22
 
-env DEFAULT_PARAMETERS 'Tools/Frame_params/SkyViper-2450GPS/defaults.parm'
+env DEFAULT_PARAMETERS Tools/Frame_params/SkyViper-2450GPS/defaults.parm
 
 # the web UI uses an abin file for firmware uploads
 env BUILD_ABIN True