zrzk
/
ardupilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers

apm_2208
Henry Wurzburg 3 years ago committed by Randy Mackay
parent
275682be15
commit
9d6f9bf907
1 changed files with 3 additions and 3 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 6
      libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp

6
libraries/AP_AdvancedFailsafe/AP_AdvancedFailsafe.cpp
Unescape View File

@ -42,13 +42,13 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = { @@ -42,13 +42,13 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = {
// @Param: MAN_PIN
// @DisplayName: Manual Pin
// @Description: This sets a digital output pin to set high when in manual mode
// @Description: This sets a digital output pin to set high when in manual mode. See the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot.
// @User: Advanced
AP_GROUPINFO("MAN_PIN", 0, AP_AdvancedFailsafe, _manual_pin, -1),
// @Param: HB_PIN
// @DisplayName: Heartbeat Pin
// @Description: This sets a digital output pin which is cycled at 10Hz when termination is not activated. Note that if a FS_TERM_PIN is set then the heartbeat pin will continue to cycle at 10Hz when termination is activated, to allow the termination board to distinguish between autopilot crash and termination.
// @Description: This sets a digital output pin which is cycled at 10Hz when termination is not activated. Note that if a FS_TERM_PIN is set then the heartbeat pin will continue to cycle at 10Hz when termination is activated, to allow the termination board to distinguish between autopilot crash and termination. Some common values are given, but see the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot.
// @User: Advanced
// @Values: -1:Disabled,49:BB Blue GP0 pin 4,50:AUXOUT1,51:AUXOUT2,52:AUXOUT3,53:AUXOUT4,54:AUXOUT5,55:AUXOUT6,57:BB Blue GP0 pin 3,113:BB Blue GP0 pin 6,116:BB Blue GP0 pin 5
AP_GROUPINFO("HB_PIN", 1, AP_AdvancedFailsafe, _heartbeat_pin, -1),
@ -79,7 +79,7 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = { @@ -79,7 +79,7 @@ const AP_Param::GroupInfo AP_AdvancedFailsafe::var_info[] = {
// @Param: TERM_PIN
// @DisplayName: Terminate Pin
// @Description: This sets a digital output pin to set high on flight termination
// @Description: This sets a digital output pin to set high on flight termination. Some common values are given, but see the Wiki's "GPIOs" page for how to determine the pin number for a given autopilot.
// @User: Advanced
// @Values: -1:Disabled,49:BB Blue GP0 pin 4,50:AUXOUT1,51:AUXOUT2,52:AUXOUT3,53:AUXOUT4,54:AUXOUT5,55:AUXOUT6,57:BB Blue GP0 pin 3,113:BB Blue GP0 pin 6,116:BB Blue GP0 pin 5
AP_GROUPINFO("TERM_PIN", 7, AP_AdvancedFailsafe, _terminate_pin, -1),

Write Preview
Loading…
Cancel
Save