remove cli planner mode - no longer used

ArduCopter/planner.pde

@@ -1,52 +0,0 @@
-// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
-
-// These are function definitions so the Menu can be constructed before the functions
-// are defined below. Order matters to the compiler.
-static int8_t   planner_gcs(uint8_t argc,               const Menu::arg *argv);
-
-// Creates a constant array of structs representing menu options
-// and stores them in Flash memory, not RAM.
-// User enters the string in the console to call the functions on the right.
-// See class Menu in AP_Common for implementation details
-const struct Menu::command planner_menu_commands[] PROGMEM = {
-    {"gcs",         planner_gcs},
-};
-
-// A Macro to create the Menu
-MENU(planner_menu, "planner", planner_menu_commands);
-
-static int8_t
-planner_mode(uint8_t argc, const Menu::arg *argv)
-{
-    Serial.printf_P(PSTR("Planner Mode\nNot intended for manual use\n\n"));
-    planner_menu.run();
-    return (0);
-}
-
-static int8_t
-planner_gcs(uint8_t argc, const Menu::arg *argv)
-{
-    gcs0.init(&Serial);
-
-    int16_t loopcount = 0;
-
-    while (1) {
-        if (millis()-fast_loopTimer > 19) {
-            fast_loopTimer                  = millis();
-
-            gcs_update();
-
-            read_radio();
-
-            gcs_data_stream_send();
-
-            if ((loopcount % 16) == 0) { // 3 hz
-                gcs_send_message(MSG_HEARTBEAT);
-            }
-
-            loopcount++;
-        }
-    }
-    return 0;
-}
-

ArduCopter/system.pde

@@ -11,7 +11,6 @@
 static int8_t   process_logs(uint8_t argc, const Menu::arg *argv);      // in Log.pde
 static int8_t   setup_mode(uint8_t argc, const Menu::arg *argv);        // in setup.pde
 static int8_t   test_mode(uint8_t argc, const Menu::arg *argv);         // in test.cpp
-static int8_t   planner_mode(uint8_t argc, const Menu::arg *argv);      // in planner.pde
 
 // This is the help function
 // PSTR is an AVR macro to read strings from flash memory
@@ -37,7 +36,6 @@ const struct Menu::command main_menu_commands[] PROGMEM = {
     {"setup",               setup_mode},
     {"test",                test_mode},
     {"help",                main_menu_help},
-    {"planner",             planner_mode}
 };
 
 // Create the top-level menu object.

ArduPlane/planner.pde

@@ -1,53 +0,0 @@
-// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
-
-// These are function definitions so the Menu can be constructed before the functions
-// are defined below. Order matters to the compiler.
-static int8_t   planner_gcs(uint8_t argc,               const Menu::arg *argv);
-
-// Creates a constant array of structs representing menu options
-// and stores them in Flash memory, not RAM.
-// User enters the string in the console to call the functions on the right.
-// See class Menu in AP_Common for implementation details
-static const struct Menu::command planner_menu_commands[] PROGMEM = {
-    {"gcs",         planner_gcs},
-};
-
-// A Macro to create the Menu
-MENU(planner_menu, "planner", planner_menu_commands);
-
-static int8_t
-planner_mode(uint8_t argc, const Menu::arg *argv)
-{
-    Serial.printf_P(PSTR("Planner Mode\n\nThis mode is not intended for manual use\n\n"));
-    planner_menu.run();
-    return 0;
-}
-static int8_t
-planner_gcs(uint8_t argc, const Menu::arg *argv)
-{
-    gcs0.init(&Serial);
-
-#if USB_MUX_PIN < 0
-    // we don't have gcs3 if we have the USB mux setup
-    gcs3.init(&Serial3);
-#endif
-
-    int16_t loopcount = 0;
-    while (1) {
-        if (millis()-fast_loopTimer_ms > 19) {
-            fast_loopTimer_ms      = millis();
-
-            gcs_update();
-
-            read_radio();
-
-            gcs_data_stream_send();
-            if ((loopcount % 16) == 0) { // 3 hz
-                gcs_send_message(MSG_HEARTBEAT);
-            }
-            loopcount++;
-        }
-    }
-    return 0;
-}
-

ArduPlane/system.pde

@@ -12,7 +12,6 @@
 static int8_t   process_logs(uint8_t argc, const Menu::arg *argv);      // in Log.pde
 static int8_t   setup_mode(uint8_t argc, const Menu::arg *argv);        // in setup.pde
 static int8_t   test_mode(uint8_t argc, const Menu::arg *argv);         // in test.cpp
-static int8_t   planner_mode(uint8_t argc, const Menu::arg *argv);      // in planner.pde
 
 // This is the help function
 // PSTR is an AVR macro to read strings from flash memory
@@ -37,7 +36,6 @@ static const struct Menu::command main_menu_commands[] PROGMEM = {
     {"setup",               setup_mode},
     {"test",                test_mode},
     {"help",                main_menu_help},
-    {"planner",             planner_mode}
 };
 
 // Create the top-level menu object.