zrzk
/
ardupilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

uncrustify ArduPlane/GCS.h

mission-4.1.18
uncrustify 13 years ago committed by Pat Hickey
parent
5267ea6aad
commit
bd0146f776
1 changed files with 127 additions and 112 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 239
      ArduPlane/GCS.h

239
ArduPlane/GCS.h
Unescape View File

@ -1,7 +1,8 @@ @@ -1,7 +1,8 @@
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/// @file GCS.h
/// @brief Interface definition for the various Ground Control System protocols.
/// @brief Interface definition for the various Ground Control System
// protocols.
#ifndef __GCS_H
#define __GCS_H
@ -26,67 +27,71 @@ class GCS_Class @@ -26,67 +27,71 @@ class GCS_Class
{
public:
/// Startup initialisation.
///
/// This routine performs any one-off initialisation required before
/// GCS messages are exchanged.
///
/// @note The stream is expected to be set up and configured for the
/// correct bitrate before ::init is called.
///
/// @note The stream is currently BetterStream so that we can use the _P
/// methods; this may change if Arduino adds them to Print.
///
/// @param port The stream over which messages are exchanged.
///
void init(FastSerial *port) {
/// Startup initialisation.
///
/// This routine performs any one-off initialisation required before
/// GCS messages are exchanged.
///
/// @note The stream is expected to be set up and configured for the
/// correct bitrate before ::init is called.
///
/// @note The stream is currently BetterStream so that we can use the _P
/// methods; this may change if Arduino adds them to Print.
///
/// @param port The stream over which messages are exchanged.
///
void init(FastSerial *port) {
_port = port;
initialised = true;
last_gps_satellites = 255;
}
/// Update GCS state.
///
/// This may involve checking for received bytes on the stream,
/// or sending additional periodic messages.
void update(void) {}
/// Send a message with a single numeric parameter.
///
/// This may be a standalone message, or the GCS driver may
/// have its own way of locating additional parameters to send.
///
/// @param id ID of the message to send.
/// @param param Explicit message parameter.
///
void send_message(enum ap_message id) {}
/// Send a text message.
///
/// @param severity A value describing the importance of the message.
/// @param str The text to be sent.
///
void send_text(gcs_severity severity, const char *str) {}
/// Send a text message with a PSTR()
///
/// @param severity A value describing the importance of the message.
/// @param str The text to be sent.
///
void send_text(gcs_severity severity, const prog_char_t *str) {}
/// Update GCS state.
///
/// This may involve checking for received bytes on the stream,
/// or sending additional periodic messages.
void update(void) {
}
/// Send a message with a single numeric parameter.
///
/// This may be a standalone message, or the GCS driver may
/// have its own way of locating additional parameters to send.
///
/// @param id ID of the message to send.
/// @param param Explicit message parameter.
///
void send_message(enum ap_message id) {
}
/// Send a text message.
///
/// @param severity A value describing the importance of the message.
/// @param str The text to be sent.
///
void send_text(gcs_severity severity, const char *str) {
}
/// Send a text message with a PSTR()
///
/// @param severity A value describing the importance of the message.
/// @param str The text to be sent.
///
void send_text(gcs_severity severity, const prog_char_t *str) {
}
// send streams which match frequency range
void data_stream_send(void);
void data_stream_send(void);
// set to true if this GCS link is active
bool initialised;
bool initialised;
// used to prevent wasting bandwidth with GPS_STATUS messages
uint8_t last_gps_satellites;
uint8_t last_gps_satellites;
protected:
/// The stream we are communicating over
FastSerial *_port;
/// The stream we are communicating over
FastSerial * _port;
};
//
@ -103,17 +108,17 @@ protected: @@ -103,17 +108,17 @@ protected:
class GCS_MAVLINK : public GCS_Class
{
public:
GCS_MAVLINK();
void update(void);
void init(FastSerial *port);
void send_message(enum ap_message id);
void send_text(gcs_severity severity, const char *str);
void send_text(gcs_severity severity, const prog_char_t *str);
void data_stream_send(void);
void queued_param_send();
void queued_waypoint_send();
static const struct AP_Param::GroupInfo var_info[];
GCS_MAVLINK();
void update(void);
void init(FastSerial *port);
void send_message(enum ap_message id);
void send_text(gcs_severity severity, const char *str);
void send_text(gcs_severity severity, const prog_char_t *str);
void data_stream_send(void);
void queued_param_send();
void queued_waypoint_send();
static const struct AP_Param::GroupInfo var_info[];
// NOTE! The streams enum below and the
// set of AP_Int16 stream rates _must_ be
@ -130,70 +135,80 @@ public: @@ -130,70 +135,80 @@ public:
NUM_STREAMS};
// see if we should send a stream now. Called at 50Hz
bool stream_trigger(enum streams stream_num);
bool stream_trigger(enum streams stream_num);
private:
void handleMessage(mavlink_message_t * msg);
/// Perform queued sending operations
///
AP_Param *_queued_parameter; ///< next parameter to be sent in queue
enum ap_var_type _queued_parameter_type; ///< type of the next parameter
AP_Param::ParamToken _queued_parameter_token;///AP_Param token for next() call
uint16_t _queued_parameter_index; ///< next queued parameter's index
uint16_t _queued_parameter_count; ///< saved count of parameters for queued send
/// Count the number of reportable parameters.
///
/// Not all parameters can be reported via MAVlink. We count the number that are
/// so that we can report to a GCS the number of parameters it should expect when it
/// requests the full set.
///
/// @return The number of reportable parameters.
///
uint16_t _count_parameters(); ///< count reportable parameters
uint16_t _parameter_count; ///< cache of reportable parameters
mavlink_channel_t chan;
uint16_t packet_drops;
void handleMessage(mavlink_message_t * msg);
/// Perform queued sending operations
///
AP_Param * _queued_parameter; ///< next parameter to
// be sent in queue
enum ap_var_type _queued_parameter_type; ///< type of the next
// parameter
AP_Param::ParamToken _queued_parameter_token; ///AP_Param token for
// next() call
uint16_t _queued_parameter_index; ///< next queued
// parameter's index
uint16_t _queued_parameter_count; ///< saved count of
// parameters for
// queued send
/// Count the number of reportable parameters.
///
/// Not all parameters can be reported via MAVlink. We count the number
// that are
/// so that we can report to a GCS the number of parameters it should
// expect when it
/// requests the full set.
///
/// @return The number of reportable parameters.
///
uint16_t _count_parameters(); ///< count reportable
// parameters
uint16_t _parameter_count; ///< cache of reportable
// parameters
mavlink_channel_t chan;
uint16_t packet_drops;
#if CLI_ENABLED == ENABLED
// this allows us to detect the user wanting the CLI to start
uint8_t crlf_count;
uint8_t crlf_count;
#endif
// waypoints
uint16_t waypoint_request_i; // request index
uint16_t waypoint_request_last; // last request index
uint16_t waypoint_dest_sysid; // where to send requests
uint16_t waypoint_dest_compid; // "
bool waypoint_sending; // currently in send process
bool waypoint_receiving; // currently receiving
uint16_t waypoint_count;
uint32_t waypoint_timelast_send; // milliseconds
uint32_t waypoint_timelast_receive; // milliseconds
uint32_t waypoint_timelast_request; // milliseconds
uint16_t waypoint_send_timeout; // milliseconds
uint16_t waypoint_receive_timeout; // milliseconds
// data stream rates. The code assumes that
// waypoints
uint16_t waypoint_request_i; // request index
uint16_t waypoint_request_last; // last request index
uint16_t waypoint_dest_sysid; // where to send requests
uint16_t waypoint_dest_compid; // "
bool waypoint_sending; // currently in send process
bool waypoint_receiving; // currently receiving
uint16_t waypoint_count;
uint32_t waypoint_timelast_send; // milliseconds
uint32_t waypoint_timelast_receive; // milliseconds
uint32_t waypoint_timelast_request; // milliseconds
uint16_t waypoint_send_timeout; // milliseconds
uint16_t waypoint_receive_timeout; // milliseconds
// data stream rates. The code assumes that
// streamRateRawSensors is the first
AP_Int16 streamRateRawSensors;
AP_Int16 streamRateExtendedStatus;
AP_Int16 streamRateRCChannels;
AP_Int16 streamRateRawController;
AP_Int16 streamRatePosition;
AP_Int16 streamRateExtra1;
AP_Int16 streamRateExtra2;
AP_Int16 streamRateExtra3;
AP_Int16 streamRateParams;
AP_Int16 streamRateRawSensors;
AP_Int16 streamRateExtendedStatus;
AP_Int16 streamRateRCChannels;
AP_Int16 streamRateRawController;
AP_Int16 streamRatePosition;
AP_Int16 streamRateExtra1;
AP_Int16 streamRateExtra2;
AP_Int16 streamRateExtra3;
AP_Int16 streamRateParams;
// number of 50Hz ticks until we next send this stream
uint8_t stream_ticks[NUM_STREAMS];
uint8_t stream_ticks[NUM_STREAMS];
// number of extra ticks to add to slow things down for the radio
uint8_t stream_slowdown;
uint8_t stream_slowdown;
};
#endif // __GCS_H

Write Preview
Loading…
Cancel
Save