HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root

7 years ago · c311599e0a
2 changed files with 2 additions and 2 deletions
--- a/libraries/AP_HAL_ChibiOS/hwdef/skyviper-f412/hwdef.dat
+++ b/libraries/AP_HAL_ChibiOS/hwdef/skyviper-f412/hwdef.dat
@ -139,4 +139,4 @@ define HAL_BARO_20789_I2C_ADDR_ICM   0x68
				@@ -139,4 +139,4 @@ define HAL_BARO_20789_I2C_ADDR_ICM   0x68
 define HAL_I2C_CLEAR_BUS

 env DEFINES CONFIG_HAL_BOARD_SUBTYPE='HAL_BOARD_SUBTYPE_CHIBIOS_SKYVIPER_F412'
-env DEFAULT_PARAMETERS '../../Tools/Frame_params/SkyViper-F412/defaults.parm'
+env DEFAULT_PARAMETERS 'Tools/Frame_params/SkyViper-F412/defaults.parm'
--- a/libraries/AP_HAL_ChibiOS/hwdef/skyviper-v2450/hwdef.dat
+++ b/libraries/AP_HAL_ChibiOS/hwdef/skyviper-v2450/hwdef.dat
@ -53,4 +53,4 @@ DMA_NOSHARE SPI2_*
				@@ -53,4 +53,4 @@ DMA_NOSHARE SPI2_*
 undef PA1
 PA1 UART4_RX UART4 NODMA

-env DEFAULT_PARAMETERS '../../Tools/Frame_params/SkyViper-2450GPS/defaults.parm'
+env DEFAULT_PARAMETERS 'Tools/Frame_params/SkyViper-2450GPS/defaults.parm'