zrzk
/
ardupilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

PX4: removed unused mixer files 

reduce size of ROMFS
mission-4.1.18
Andrew Tridgell 9 years ago
parent
05e533e6fc
commit
c823d64073
15 changed files with 0 additions and 570 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 64
      mk/PX4/ROMFS/mixers/FMU_AERT.mix
  2. 60
      mk/PX4/ROMFS/mixers/FMU_AET.mix
  3. 52
      mk/PX4/ROMFS/mixers/FMU_Q.mix
  4. 53
      mk/PX4/ROMFS/mixers/FMU_RET.mix
  5. 50
      mk/PX4/ROMFS/mixers/FMU_X5.mix
  6. 50
      mk/PX4/ROMFS/mixers/FMU_delta.mix
  7. 7
      mk/PX4/ROMFS/mixers/FMU_hex_+.mix
  8. 7
      mk/PX4/ROMFS/mixers/FMU_hex_x.mix
  9. 7
      mk/PX4/ROMFS/mixers/FMU_octo_+.mix
  10. 7
      mk/PX4/ROMFS/mixers/FMU_octo_x.mix
  11. 38
      mk/PX4/ROMFS/mixers/FMU_pass.mix
  12. 7
      mk/PX4/ROMFS/mixers/FMU_quad_+.mix
  13. 7
      mk/PX4/ROMFS/mixers/FMU_quad_v.mix
  14. 7
      mk/PX4/ROMFS/mixers/FMU_quad_x.mix
  15. 154
      mk/PX4/ROMFS/mixers/README

64
mk/PX4/ROMFS/mixers/FMU_AERT.mix
Unescape View File

@ -1,64 +0,0 @@
Aileron/rudder/elevator/throttle mixer for PX4FMU
==================================================
This file defines mixers suitable for controlling a fixed wing aircraft with
aileron, rudder, elevator and throttle controls using PX4FMU. The configuration
assumes the aileron servo(s) are connected to PX4FMU servo output 0, the
elevator to output 1, the rudder to output 2 and the throttle to output 3.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
Aileron mixer
-------------
Two scalers total (output, roll).
This mixer assumes that the aileron servos are set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
As there is only one output, if using two servos adjustments to compensate for
differences between the servos must be made mechanically. To obtain the correct
motion using a Y cable, the servos can be positioned reversed from one another.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 0 10000 10000 0 -10000 10000
Elevator mixer
------------
Two scalers total (output, roll).
This mixer assumes that the elevator servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 -10000 -10000 0 -10000 10000
Rudder mixer
------------
Two scalers total (output, yaw).
This mixer assumes that the rudder servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 2 10000 10000 0 -10000 10000
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

60
mk/PX4/ROMFS/mixers/FMU_AET.mix
Unescape View File

@ -1,60 +0,0 @@
Aileron/elevator/throttle mixer for PX4FMU
==================================================
This file defines mixers suitable for controlling a fixed wing aircraft with
aileron, elevator and throttle controls using PX4FMU. The configuration assumes
the aileron servo(s) are connected to PX4FMU servo output 0, the elevator to
output 1 and the throttle to output 3.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
Aileron mixer
-------------
Two scalers total (output, roll).
This mixer assumes that the aileron servos are set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
As there is only one output, if using two servos adjustments to compensate for
differences between the servos must be made mechanically. To obtain the correct
motion using a Y cable, the servos can be positioned reversed from one another.
Alternatively, output 2 could be used as a second aileron servo output with
separate mixing.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 0 10000 10000 0 -10000 10000
Elevator mixer
------------
Two scalers total (output, roll).
This mixer assumes that the elevator servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 -10000 -10000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

52
mk/PX4/ROMFS/mixers/FMU_Q.mix
Unescape View File

@ -1,52 +0,0 @@
Delta-wing mixer for PX4FMU
===========================
Designed for Bormatec Camflyer Q
This file defines mixers suitable for controlling a delta wing aircraft using
PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
assumed to be unused.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
See the README for more information on the scaler format.
Elevon mixers
-------------
Three scalers total (output, roll, pitch).
On the assumption that the two elevon servos are physically reversed, the pitch
input is inverted between the two servos.
The scaling factor for roll inputs is adjusted to implement differential travel
for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -5000 -8000 0 -10000 10000
S: 0 1 8000 8000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -8000 -5000 0 -10000 10000
S: 0 1 -8000 -8000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

53
mk/PX4/ROMFS/mixers/FMU_RET.mix
Unescape View File

@ -1,53 +0,0 @@
Rudder/elevator/throttle mixer for PX4FMU
=========================================
This file defines mixers suitable for controlling a fixed wing aircraft with
rudder, elevator and throttle controls using PX4FMU. The configuration assumes
the rudder servo is connected to PX4FMU servo output 0, the elevator to output 1
and the throttle to output 3.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
Rudder mixer
------------
Two scalers total (output, roll).
This mixer assumes that the rudder servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 0 10000 10000 0 -10000 10000
Elevator mixer
------------
Two scalers total (output, roll).
This mixer assumes that the elevator servo is set up correctly mechanically;
depending on the actual configuration it may be necessary to reverse the scaling
factors (to reverse the servo movement) and adjust the offset, scaling and
endpoints to suit.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 -10000 -10000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

50
mk/PX4/ROMFS/mixers/FMU_X5.mix
Unescape View File

@ -1,50 +0,0 @@
Delta-wing mixer for PX4FMU
===========================
This file defines mixers suitable for controlling a delta wing aircraft using
PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
assumed to be unused.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
See the README for more information on the scaler format.
Elevon mixers
-------------
Three scalers total (output, roll, pitch).
On the assumption that the two elevon servos are physically reversed, the pitch
input is inverted between the two servos.
The scaling factor for roll inputs is adjusted to implement differential travel
for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -3000 -5000 0 -10000 10000
S: 0 1 -5000 -5000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 -5000 -3000 0 -10000 10000
S: 0 1 5000 5000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

50
mk/PX4/ROMFS/mixers/FMU_delta.mix
Unescape View File

@ -1,50 +0,0 @@
Delta-wing mixer for PX4FMU
===========================
This file defines mixers suitable for controlling a delta wing aircraft using
PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
assumed to be unused.
Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
(roll), 1 (pitch) and 3 (thrust).
See the README for more information on the scaler format.
Elevon mixers
-------------
Three scalers total (output, roll, pitch).
On the assumption that the two elevon servos are physically reversed, the pitch
input is inverted between the two servos.
The scaling factor for roll inputs is adjusted to implement differential travel
for the elevons.
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 3000 5000 0 -10000 10000
S: 0 1 5000 5000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000
S: 0 0 5000 3000 0 -10000 10000
S: 0 1 -5000 -5000 0 -10000 10000
Output 2
--------
This mixer is empty.
Z:
Motor speed mixer
-----------------
Two scalers total (output, thrust).
This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
range. Inputs below zero are treated as zero.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 0 20000 -10000 -10000 10000

7
mk/PX4/ROMFS/mixers/FMU_hex_+.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a hexacopter in the + configuration. All controls
are mixed 100%.
R: 6+ 10000 10000 10000 0

7
mk/PX4/ROMFS/mixers/FMU_hex_x.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a hexacopter in the X configuration. All controls
are mixed 100%.
R: 6x 10000 10000 10000 0

7
mk/PX4/ROMFS/mixers/FMU_octo_+.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a octocopter in the + configuration. All controls
are mixed 100%.
R: 8+ 10000 10000 10000 0

7
mk/PX4/ROMFS/mixers/FMU_octo_x.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a octocopter in the X configuration. All controls
are mixed 100%.
R: 8x 10000 10000 10000 0

38
mk/PX4/ROMFS/mixers/FMU_pass.mix
Unescape View File

@ -1,38 +0,0 @@
Passthrough mixer for PX4FMU
============================
This file defines passthrough mixers suitable for testing.
Channel group 0, channels 0-7 are passed directly through to the outputs.
M: 1
O: 10000 10000 0 -10000 10000
S: 0 0 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 1 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 2 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 3 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 4 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 5 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 6 10000 10000 0 -10000 10000
M: 1
O: 10000 10000 0 -10000 10000
S: 0 7 10000 10000 0 -10000 10000

7
mk/PX4/ROMFS/mixers/FMU_quad_+.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a quadrotor in the + configuration. All controls
are mixed 100%.
R: 4+ 10000 10000 10000 0

7
mk/PX4/ROMFS/mixers/FMU_quad_v.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a quadrotor in the V configuration. All controls
are mixed 100%.
R: 4v 10000 10000 10000 0

7
mk/PX4/ROMFS/mixers/FMU_quad_x.mix
Unescape View File

@ -1,7 +0,0 @@
Multirotor mixer for PX4FMU
===========================
This file defines a single mixer for a quadrotor in the X configuration. All controls
are mixed 100%.
R: 4x 10000 10000 10000 0

154
mk/PX4/ROMFS/mixers/README
Unescape View File

@ -1,154 +0,0 @@
PX4 mixer definitions
=====================
Files in this directory implement example mixers that can be used as a basis
for customisation, or for general testing purposes.
Mixer basics
------------
Mixers combine control values from various sources (control tasks, user inputs,
etc.) and produce output values suitable for controlling actuators; servos,
motors, switches and so on.
An actuator derives its value from the combination of one or more control
values. Each of the control values is scaled according to the actuator's
configuration and then combined to produce the actuator value, which may then be
further scaled to suit the specific output type.
Internally, all scaling is performed using floating point values. Inputs and
outputs are clamped to the range -1.0 to 1.0.
control control control
| | |
v v v
scale scale scale
| | |
| v |
+-------> mix <------+
|
scale
|
v
out
Scaling
-------
Basic scalers provide linear scaling of the input to the output.
Each scaler allows the input value to be scaled independently for inputs
greater/less than zero. An offset can be applied to the output, and lower and
upper boundary constraints can be applied. Negative scaling factors cause the
output to be inverted (negative input produces positive output).
Scaler pseudocode:
if (input < 0)
output = (input * NEGATIVE_SCALE) + OFFSET
else
output = (input * POSITIVE_SCALE) + OFFSET
if (output < LOWER_LIMIT)
output = LOWER_LIMIT
if (output > UPPER_LIMIT)
output = UPPER_LIMIT
Syntax
------
Mixer definitions are text files; lines beginning with a single capital letter
followed by a colon are significant. All other lines are ignored, meaning that
explanatory text can be freely mixed with the definitions.
Each file may define more than one mixer; the allocation of mixers to actuators
is specific to the device reading the mixer definition, and the number of
actuator outputs generated by a mixer is specific to the mixer.
A mixer begins with a line of the form
<tag>: <mixer arguments>
The tag selects the mixer type; 'M' for a simple summing mixer, 'R' for a
multirotor mixer, etc.
Null Mixer
..........
A null mixer consumes no controls and generates a single actuator output whose
value is always zero. Typically a null mixer is used as a placeholder in a
collection of mixers in order to achieve a specific pattern of actuator outputs.
The null mixer definition has the form:
Z:
Simple Mixer
............
A simple mixer combines zero or more control inputs into a single actuator
output. Inputs are scaled, and the mixing function sums the result before
applying an output scaler.
A simple mixer definition begins with:
M: <control count>
O: <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
If <control count> is zero, the sum is effectively zero and the mixer will
output a fixed value that is <offset> constrained by <lower limit> and <upper
limit>.
The second line defines the output scaler with scaler parameters as discussed
above. Whilst the calculations are performed as floating-point operations, the
values stored in the definition file are scaled by a factor of 10000; i.e. an
offset of -0.5 is encoded as -5000.
The definition continues with <control count> entries describing the control
inputs and their scaling, in the form:
S: <group> <index> <-ve scale> <+ve scale> <offset> <lower limit> <upper limit>
The <group> value identifies the control group from which the scaler will read,
and the <index> value an offset within that group. These values are specific to
the device reading the mixer definition.
When used to mix vehicle controls, mixer group zero is the vehicle attitude
control group, and index values zero through three are normally roll, pitch,
yaw and thrust respectively.
The remaining fields on the line configure the control scaler with parameters as
discussed above. Whilst the calculations are performed as floating-point
operations, the values stored in the definition file are scaled by a factor of
10000; i.e. an offset of -0.5 is encoded as -5000.
Multirotor Mixer
................
The multirotor mixer combines four control inputs (roll, pitch, yaw, thrust)
into a set of actuator outputs intended to drive motor speed controllers.
The mixer definition is a single line of the form:
R: <geometry> <roll scale> <pitch scale> <yaw scale> <deadband>
The supported geometries include:
4x - quadrotor in X configuration
4+ - quadrotor in + configuration
6x - hexcopter in X configuration
6+ - hexcopter in + configuration
8x - octocopter in X configuration
8+ - octocopter in + configuration
Each of the roll, pitch and yaw scale values determine scaling of the roll,
pitch and yaw controls relative to the thrust control. Whilst the calculations
are performed as floating-point operations, the values stored in the definition
file are scaled by a factor of 10000; i.e. an factor of 0.5 is encoded as 5000.
Roll, pitch and yaw inputs are expected to range from -1.0 to 1.0, whilst the
thrust input ranges from 0.0 to 1.0. Output for each actuator is in the
range -1.0 to 1.0.
In the case where an actuator saturates, all actuator values are rescaled so that
the saturating actuator is limited to 1.0.
Write Preview
Loading…
Cancel
Save