HAL_ChibiOS: use ARRAY_SIZE_SIMPLE

this allows for boards without a device type (eg. no SPI bus)

libraries/AP_HAL_ChibiOS/AnalogIn.cpp

@@ -58,7 +58,7 @@ const ChibiAnalogIn::pin_info ChibiAnalogIn::pin_config[] = {
     { 15,  VOLTAGE_SCALING*2 }, // analog airspeed sensor, 2:1 scaling
 };
 
-#define ADC_GRP1_NUM_CHANNELS   ARRAY_SIZE(ChibiAnalogIn::pin_config)
+#define ADC_GRP1_NUM_CHANNELS   ARRAY_SIZE_SIMPLE(ChibiAnalogIn::pin_config)
 
 // samples filled in by ADC DMA engine
 adcsample_t ChibiAnalogIn::samples[ADC_DMA_BUF_DEPTH*ADC_GRP1_NUM_CHANNELS];

libraries/AP_HAL_ChibiOS/GPIO.cpp

@@ -49,7 +49,7 @@ static struct gpio_entry {
 #endif
 };
 
-#define NUM_PINS ARRAY_SIZE(_gpio_tab)
+#define NUM_PINS ARRAY_SIZE_SIMPLE(_gpio_tab)
 #define PIN_ENABLED(pin) ((pin)<NUM_PINS && _gpio_tab[pin].enabled)
 
 /*
@@ -57,7 +57,7 @@ static struct gpio_entry {
  */
 static struct gpio_entry *gpio_by_pin_num(uint8_t pin_num)
 {
-    for (uint8_t i=0; i<ARRAY_SIZE(_gpio_tab); i++) {
+    for (uint8_t i=0; i<ARRAY_SIZE_SIMPLE(_gpio_tab); i++) {
         if (pin_num == _gpio_tab[i].pin_num) {
             if (!_gpio_tab[i].enabled) {
                 return NULL;
@@ -125,7 +125,7 @@ void ChibiGPIO::init()
 {
     extStart(&EXTD1, &extcfg);
     uint8_t pwm_count = AP_BoardConfig::get_pwm_count();
-    for (uint8_t i=0; i<ARRAY_SIZE(_gpio_tab); i++) {
+    for (uint8_t i=0; i<ARRAY_SIZE_SIMPLE(_gpio_tab); i++) {
         uint8_t pin_num = _gpio_tab[i].pin_num;
         if (pin_num >= 50 && pin_num <= 55) {
             // enable GPIOs based on BRD_PWM_COUNT

libraries/AP_HAL_ChibiOS/I2CDevice.cpp

@@ -31,7 +31,7 @@ static const struct I2CInfo {
 using namespace ChibiOS;
 extern const AP_HAL::HAL& hal;
 
-I2CBus I2CDeviceManager::businfo[ARRAY_SIZE(I2CD)];
+I2CBus I2CDeviceManager::businfo[ARRAY_SIZE_SIMPLE(I2CD)];
 
 // get a handle for DMA sharing DMA channels with other subsystems
 void I2CBus::dma_init(void)
@@ -44,7 +44,7 @@ void I2CBus::dma_init(void)
 // setup I2C buses
 I2CDeviceManager::I2CDeviceManager(void)
 {
-    for (uint8_t i=0; i<ARRAY_SIZE(I2CD); i++) {
+    for (uint8_t i=0; i<ARRAY_SIZE_SIMPLE(I2CD); i++) {
         businfo[i].busnum = i;
         businfo[i].dma_init();
         /*
@@ -205,7 +205,7 @@ I2CDeviceManager::get_device(uint8_t bus, uint8_t address,
                              bool use_smbus,
                              uint32_t timeout_ms)
 {
-    if (bus >= ARRAY_SIZE(I2CD)) {
+    if (bus >= ARRAY_SIZE_SIMPLE(I2CD)) {
         return AP_HAL::OwnPtr<AP_HAL::I2CDevice>(nullptr);
     }
     auto dev = AP_HAL::OwnPtr<AP_HAL::I2CDevice>(new I2CDevice(bus, address, bus_clock, use_smbus, timeout_ms));

libraries/AP_HAL_ChibiOS/RCOutput.cpp

@@ -58,7 +58,7 @@ const struct ChibiRCOutput::pwm_group ChibiRCOutput::pwm_group_list[] =
     }
 };
 
-#define NUM_GROUPS ARRAY_SIZE(pwm_group_list)
+#define NUM_GROUPS ARRAY_SIZE_SIMPLE(pwm_group_list)
 
 void ChibiRCOutput::init()
 {

libraries/AP_HAL_ChibiOS/SPIDevice.cpp

@@ -276,12 +276,12 @@ SPIDeviceManager::get_device(const char *name)
 {
     /* Find the bus description in the table */
     uint8_t i;
-    for (i = 0; i<ARRAY_SIZE(device_table); i++) {
+    for (i = 0; i<ARRAY_SIZE_SIMPLE(device_table); i++) {
         if (strcmp(device_table[i].name, name) == 0) {
             break;
         }
     }
-    if (i == ARRAY_SIZE(device_table)) {
+    if (i == ARRAY_SIZE_SIMPLE(device_table)) {
         printf("SPI: Invalid device name: %s\n", name);
         return AP_HAL::OwnPtr<AP_HAL::SPIDevice>(nullptr);
     }