AP_Scripting: add set_desired_speed binding

libraries/AP_Scripting/docs/docs.lua

@@ -1388,6 +1388,11 @@ function vehicle:set_velocity_match(param1) end
 ---@return boolean
 function vehicle:nav_scripting_enable(param1) end
 
+-- desc sets autopilot nav speed (Copter and Rover)
+---@param param1 number
+---@return boolean
+function vehicle:set_desired_speed(param1) end
+
 -- desc
 ---@param param1 number
 ---@param param2 number

libraries/AP_Scripting/examples/rover-TerrainDetector.lua

@@ -0,0 +1,209 @@
+--[[----------------------------------------------------------------------------
+
+TerrainDetector ArduPilot Lua script
+
+Uses gyro and accelerometer data to detect rough terrain and slow the
+vehicle's speed accordingly during auto missions.
+
+Provides a set of custom tuning parameters:
+ROUGH_SPEED     : (m/s) rough terrain desired speed, set to -1 to disable detection
+ROUGH_TIMEOUT_MS: (ms) min time to remain slowed down for rough terrain
+ROUGH_GZ_MAX    : (G) slow down on Gz impulses greater than this value
+ROUGH_RATE_MAX  : (deg/s) slow down on rate transients greater than this value
+
+These gain values are used for smooth terrain detection.
+Smaller values (less than 1.0) are more restrictive about resuming normal speed.
+ROUGH_GZ_GAIN   : Gz impulse gain
+ROUGH_RATE_GAIN : gyro transient rate gain
+
+CAUTION: This script is capable of engaging and disengaging autonomous control
+of a vehicle.  Use this script AT YOUR OWN RISK.
+
+-- Yuri -- Jul 2022
+
+LICENSE - GNU GPLv3 https://www.gnu.org/licenses/gpl-3.0.en.html
+
+Concept first presented during this live stream:
+https://www.youtube.com/watch?v=UdXGXjigxAo&t=7155s
+Credit to @ktrussell for the idea and discussion!
+------------------------------------------------------------------------------]]
+
+local SCRIPT_NAME     = 'TerrainDetector'
+local RUN_INTERVAL_MS =  25  -- needs to be pretty fast for good detection
+local SBY_INTERVAL_MS = 500  -- slower interval when detection is disabled
+local PARAM_TABLE_KEY = 117  -- unique index value between 0 and 200
+
+-- GCS messages
+local VERBOSE_MODE = 1 -- 0 to suppress all GCS messages,
+                       -- 1 for normal status messages
+                       -- 2 for additional debug messages
+local MSG_NORMAL   = 1
+local MSG_DEBUG    = 2
+
+-- MAVLink values
+local MAV_SEVERITY_WARNING = 4
+local MAV_SEVERITY_INFO    = 6
+
+-- mathematical/physical constants
+local G          = -9.81 -- m/s/s
+
+-- create custom parameter set
+local function add_params(key, prefix, tbl)
+    assert(param:add_table(key, prefix, #tbl), string.format('Could not add %s param table.', prefix))
+    for num = 1, #tbl do
+        assert(param:add_param(key, num,  tbl[num][1], tbl[num][2]), string.format('Could not add %s%s.', prefix, tbl[num][1]))
+    end
+end
+
+add_params(PARAM_TABLE_KEY, 'ROUGH_', {
+    --  { name, default value },
+        { 'SPEED',        0.7 },
+        { 'GZ_MAX',      1.33 },
+        { 'RATE_MAX',      28 },
+        { 'GZ_GAIN',      0.9 },
+        { 'RATE_GAIN',    0.8 },
+        { 'TIMEOUT_MS',  7500 }
+    })
+
+-- wrapper for gcs:send_text()
+local function gcs_msg(msg_type, severity, txt)
+    if type(msg_type) == 'string' then
+    -- allow just a string to be passed for simple/routine messages
+        txt      = msg_type
+        msg_type = MSG_NORMAL
+        severity = MAV_SEVERITY_INFO
+    end
+    if type(severity) == 'string' then
+    -- allow just severity and string to be passed for normal messages
+        txt = severity
+        severity = msg_type
+        msg_type = MSG_NORMAL
+    end
+    if msg_type <= VERBOSE_MODE then
+        gcs:send_text(severity, string.format('%s: %s', SCRIPT_NAME, txt))
+    end
+end
+
+local last_g_z   = 0  -- to calculate impulse Gz
+local timeout_ms = 0
+
+-- debug values
+local max_g_z       = 0
+local max_gyro_rate = 0
+
+local wp_speed_normal = nil
+local wp_speed_rough = nil
+local impulse_gz_threshold = nil
+local gyro_rate_threshold = nil
+local rough_terrain_timeout_ms = nil
+local impulse_gain = nil
+local gyro_gain = nil
+
+function standby()
+    wp_speed_rough = param:get('ROUGH_SPEED')
+    if wp_speed_rough < 0 then return standby, SBY_INTERVAL_MS end
+
+    if mission:state() == mission.MISSION_RUNNING then
+        -- only poll remaining parameters at start of mission
+        wp_speed_normal          = param:get('WP_SPEED')
+        impulse_gz_threshold     = param:get('ROUGH_GZ_MAX')
+        gyro_rate_threshold      = param:get('ROUGH_RATE_MAX')
+        rough_terrain_timeout_ms = param:get('ROUGH_TIMEOUT_MS')
+        impulse_gain             = param:get('ROUGH_GZ_GAIN')
+        gyro_gain                = param:get('ROUGH_RATE_GAIN')
+        -- if ROUGH_SPEED param not set or invalid, use half of WP_SPEED
+        if wp_speed_rough == 0 or wp_speed_rough > wp_speed_normal then
+            wp_speed_rough = wp_speed_normal / 2
+            gcs_msg(MAV_SEVERITY_WARNING, 'ROUGH_SPEED invalid, using half WP_SPEED')
+        end
+
+        last_g_z = 0
+        return do_normal_speed, RUN_INTERVAL_MS
+    end
+    return standby, SBY_INTERVAL_MS
+end
+
+function initiate_rough_speed()
+    gcs_msg(MSG_NORMAL, MAV_SEVERITY_WARNING, 'Slowing for rough terrain')
+    vehicle:set_desired_speed(wp_speed_rough)
+    last_g_z   = 0
+    timeout_ms = millis() + rough_terrain_timeout_ms
+    max_g_z       = 0
+    max_gyro_rate = 0
+    return do_rough_speed, RUN_INTERVAL_MS
+end
+
+function initiate_normal_speed()
+    gcs_msg(MSG_NORMAL, MAV_SEVERITY_WARNING, 'Resuming normal speed')
+    vehicle:set_desired_speed(wp_speed_normal)
+    last_g_z = 0
+    return do_normal_speed, RUN_INTERVAL_MS
+end
+
+function do_normal_speed()
+    if mission:state() ~= mission.MISSION_RUNNING then
+        return standby, SBY_INTERVAL_MS
+    end
+
+    local g_z         = ahrs:get_accel():z() / G  -- convert to G from m/s/s
+    local gyro        = ahrs:get_gyro()
+    -- sample max of roll/pitch rates
+    local gyro_rate   = math.deg(math.max(math.abs(gyro:x()), math.abs(gyro:y())))
+    local impulse_g_z = math.abs(g_z - last_g_z)  -- sample delta is the measured impulse
+    last_g_z = g_z
+
+    if impulse_g_z > impulse_gz_threshold then  -- slow down
+        gcs_msg(MSG_DEBUG, MAV_SEVERITY_INFO, string.format('Impulse - %.2f Gz', impulse_g_z))
+        return initiate_rough_speed, RUN_INTERVAL_MS
+    end
+
+    if gyro_rate > gyro_rate_threshold then  -- slow down
+        gcs_msg(MSG_DEBUG, MAV_SEVERITY_INFO, string.format('Transient - %.2f deg/s', gyro_rate))
+        return initiate_rough_speed, RUN_INTERVAL_MS
+    end
+
+    return do_normal_speed, RUN_INTERVAL_MS
+end
+
+function do_rough_speed()
+    if mission:state() ~= mission.MISSION_RUNNING then
+        return standby, SBY_INTERVAL_MS
+    end
+
+    local g_z         = ahrs:get_accel():z() / G  -- convert to G from m/s/s
+    local gyro        = ahrs:get_gyro()
+    -- sample max of roll/pitch rates
+    local gyro_rate   = math.deg(math.max(math.abs(gyro:x()), math.abs(gyro:y())))
+    local impulse_g_z = math.abs(g_z - last_g_z) -- sample delta is the measured impulse
+    last_g_z = g_z
+
+    max_g_z = math.max(g_z, max_g_z)
+    max_gyro_rate = math.max(gyro_rate, max_gyro_rate)
+
+    local now = millis()
+
+    if impulse_g_z > impulse_gz_threshold * impulse_gain then  -- stay slow
+        gcs_msg(MSG_DEBUG, MAV_SEVERITY_INFO, string.format('Timer reset - %.2fGz', impulse_g_z))
+        max_g_z = 0
+        timeout_ms = now + rough_terrain_timeout_ms
+        return do_rough_speed, RUN_INTERVAL_MS
+    end
+
+    if gyro_rate > gyro_rate_threshold * gyro_gain then  -- stay slow
+        gcs_msg(MSG_DEBUG, MAV_SEVERITY_INFO, string.format('Timer reset - %.2f deg/s', gyro_rate))
+        max_gyro_rate = 0
+        timeout_ms = now + rough_terrain_timeout_ms
+        return do_rough_speed, RUN_INTERVAL_MS
+    end
+
+    if now > timeout_ms then  -- no longer in rough terrain
+        gcs_msg(MSG_DEBUG, MAV_SEVERITY_INFO, string.format('Max - %.2fGz ... %.2f deg/s', max_g_z, max_gyro_rate))
+        return initiate_normal_speed, RUN_INTERVAL_MS
+    end
+
+    return do_rough_speed, RUN_INTERVAL_MS
+end
+
+gcs_msg('Script active')
+
+return standby, SBY_INTERVAL_MS

libraries/AP_Scripting/generator/description/bindings.desc

@@ -232,6 +232,7 @@ singleton AP_Vehicle method nav_script_time boolean uint16_t'Null uint8_t'Null f
 singleton AP_Vehicle method nav_script_time_done void uint16_t'skip_check
 singleton AP_Vehicle method set_target_throttle_rate_rpy void float -100 100 float'skip_check float'skip_check float'skip_check
 singleton AP_Vehicle method set_desired_turn_rate_and_speed boolean float'skip_check float'skip_check
+singleton AP_Vehicle method set_desired_speed boolean float'skip_check
 singleton AP_Vehicle method nav_scripting_enable boolean uint8_t 0 UINT8_MAX
 singleton AP_Vehicle method set_velocity_match boolean Vector2f