c9bbfd94c0
hwdef: set AUTOBUILD_TARGETS None on eval boards
3 years ago
c1e0e9c305
AP_HAL_ChibiOS: fix ms5611 probe for NucleoH743
3 years ago
0eacc0348e
AP_HAL_ChibiOS: remove HAL_COMPASS_DEFAULT define
...
this doesn't actually allow you to specify a default, despite the name
and a couple of hwdefs trying to use it that way.
This would have stopped being useful when we did the
compass-prority-table stuff - or before.
3 years ago
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
3 years ago
32cdfddf12
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
...
much easier to understand
5 years ago
e8b2b52bae
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
...
use default
5 years ago
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
5 years ago
614a059819
HAL_ChibiOS: convert more boards to using new sensor config system
6 years ago
2b0a30a2c5
HAL_ChibiOS: ensure we don't overflow bootloader area
...
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
6 years ago
d942b64584
HAL_ChibiOS: fixed NucleoH743 build
6 years ago
723e8a23fc
HAL_ChibiOS: enable HSE_BYPASS for NucleoH743
6 years ago
b662adf8cc
HAL_ChibiOS: setup sensors on NucleoH743
6 years ago
5faec2f869
HAL_ChibiOS: removed HSE bypass for NucleoH743
...
not needed any more
6 years ago
0691e23219
HAL_ChibiOS: setup some sensors on NucleoH743
6 years ago
8c55f7bc49
HAL_ChibiOS: enable debug on SD7 for bootloader for NucleoH743
6 years ago
c2746ca9f9
HAL_ChibiOS: simplify H7 hwdef.dat
6 years ago
972ae519a6
HAL_ChibiOS: added minimal hwdef for STM32H743 Nucleo board
6 years ago
Andrew Tridgell
Mirko Denecke
Peter Barker