ardupilot

Commit Graph

Author	SHA1	Message	Date
Andrew Tridgell	bf9c76a5c3	SITL: added SIM_MAGn_FAIL parameters	4 years ago
Andrew Tridgell	b18928e28e	SITL: fixed SIM_IMU_COUNT conflict this came from merging two PRs which both changed SITL params	5 years ago
Andrew Tridgell	c16467a47f	SITL: added SIM_IMU_COUNT	5 years ago
Harshit Kumar Sankhla	8507c7d3b9	SITL: add some airspeed, baro, gps noise simulation parameters also some rearrangements in the parameter lists to make things look better	5 years ago
Andrew Tridgell	91b4830801	SITL: added SIM_GPS_ACC parameters	5 years ago
Iampete1	537eec9091	SITL: add rangefinder support	5 years ago
Andrew Tridgell	a6df0745a6	SITL: make all GPS params available for both GPS	5 years ago
Andrew Tridgell	f9f8822e47	SITL: added ship takeoff/landing simulation this allows for a ship with a given radius and speed, allowing for testing of ship takeoff and landing systems	5 years ago
Andrew Tridgell	925b44dee5	SITL: split out GPS and MAG parameters into their own tables this creates space for new parameter trees	5 years ago
Harshit Kumar Sankhla	33ac9efe17	SITL: add parameters for 2nd baro	5 years ago
Randy Mackay	443d4186a4	SITL: default vicon to send position and speed	5 years ago
Peter Barker	88c8dd8465	SITL: add RichenPower generator simulator	5 years ago
Andrew Tridgell	2e7dc380c4	SITL: revert default physics step to 1200 this should help us pass CI	5 years ago
Andrew Tridgell	750b220a5f	SITL: simulations optimisations - change to 600Hz physics rate by default - don't export rotational acceleration (not needed) - report speedup in terminal output at 0.5Hz (wall clock rate)	5 years ago
bugobliterator	95493e4569	SITL: add support for per mag calibration	5 years ago
Andrew Tridgell	e4596efe9b	SITL: added SIM_RATE_HZ this allows the physics step size to be changed while flying the internal models, which allows for lower CPU usage	5 years ago
Randy Mackay	c8f6cb233b	SITL: vicon supports sending vision-speed-estimate SIM_VICON_TMASK controls which of the 3 supported messages are sent SIM_VICON_VGLI_X/Y/Z allows introducing a velocity glitch	5 years ago
Randy Mackay	366d03a533	SITL: add VICON_YAWERR this allows simulating an error in the camera's reported yaw	5 years ago
Randy Mackay	bf9ee4ada8	SITL: remove unused MAG_ERROR and VICON_HSTLEN params	5 years ago
Randy Mackay	d8bc197d35	SITL: add VICON_GLIT_XYZ, FAIL and YAW glitches are in meters in vicon's frame fail disables sending of vision-position-estimate messages yaw is the vicon's heading in degrees. i.e. if vicon's "forward" is pointing to the east, yaw should be set to 90	5 years ago
Willian Galvani	cf6f5502a4	SITL: Make Sub buoyancy a parameter	5 years ago
Randy Mackay	3ccb3c69a6	SITL: add vicon position offsets	5 years ago
Andrew Tridgell	778532d556	SITL: added SIM_GPS2_HDG and rationalise the GPS position variables	5 years ago
Samuel Tabor	5082c9be8b	SITL: Add plane-soaring type, including parameters, mission, simulated thermals and glider sim settings.	5 years ago
Andrew Tridgell	09b272b840	SITL: added SIM_LED_LAYOUT parameter for layout of simulated LEDs	5 years ago
Andy Piper	2033cf3b4a	SITL: add SIM_VIB_MOT_MULT to allow motor noise to have a different amplitude to the fixed frequency noise	5 years ago
Siddharth Purohit	8a7dcafa0f	SITL: add parameter MAG_DEVID in SITL	5 years ago
Andrew Tridgell	fb3496b63b	SITL: added SIM_GPS2_POS and re-arrange two sets of GPS parameters to be arrays	5 years ago
Andy Piper	a6a020b3c7	SITL: record throttle value instead of motors on/off	5 years ago
Andy Piper	c807267bab	SITL: add rpm-based motor noise per-motor to gyros and accels convert multicopter thrust to rpm per motor	5 years ago
Andrew Tridgell	7b203f6816	SITL: added SIM_MAG_SCALING for testing scale factor errors	5 years ago
Peter Barker	326ba5b974	SITL: support for virtual hardware safety switch	5 years ago
Andrew Tridgell	4d50996780	SITL: added MegaSquirt EFI simulation	5 years ago
Peter Barker	47fbf70e85	SITL: create SITL tonealarm files to hold enable parameter	5 years ago
Peter Barker	32ec6d7e9a	SITL: add a simulated buzzer	5 years ago
Andrew Tridgell	3d9f393f4b	SITL: added SIM_LOOP_DELAY parameter this allows us to test high CPU load conditions by adding a delay to each loop	5 years ago
Peter Barker	169013cae2	SITL: allow starting location to come from parameters	6 years ago
Peter Barker	24405f1b23	SITL: correct and add comment	6 years ago
Peter Hall	2a3676003a	SITL: sailboat add tide	6 years ago
Peter Hall	90bf224e7f	SITL: sailboat add wave simulation and parameters	6 years ago
Grant Morphett	2ce7955614	SITL: Create gps_hdt_enabled varible for enable/disable HDT GPS sentence	6 years ago
Peter Barker	e01ea2f5f9	SITL: support a count of baros	6 years ago
Peter Barker	6939a9fa91	SITL: add capability to twist the aircraft This makes the EKF very, very unhappy, but is useful for compass calibration testing	6 years ago
Andrew Tridgell	e18f40cc08	SITL: added IMU failure masks	6 years ago
Paul Riseborough	8ac8c7285b	SITL: Add parameter for optical flow sensor noise	6 years ago
Peter Barker	4db011f530	SITL: add SIM_SHOVE_* options to shove the simulated vehicle The parameter values are time in milliseconds and body-frame acceleration in m/s/s So to test throw mode: mode throw param set SIM_SHOVE_Z -30 arm throttle param set SIM_SHOVE_TIME 500	6 years ago
Pierre Kancir	04bc267a61	SITL: add precland object add position for precland object add refresh rate add alt and lateral range add diffusion range	6 years ago
Tom Pittenger	a4e91e196f	SITL: unify singleton naming to _singleton and get_singleton()	6 years ago
Andrew Tridgell	56683ba803	SITL: added SIM_BAUDRATE_EN parameter	6 years ago
Peter Barker	6fc76a32af	GLOBAL: use AP::logger() and strip redundant Log_ from methods	6 years ago

1 2 3 4

151 Commits (21ffc0f66378db71a4ed108025bb6ac596a6b666)