ardupilot

Commit Graph

Author	SHA1	Message	Date
Craig Elder	69bf5700cd	IMU: expose IMU_PRODUCT_ID as EEPROM Variable this will allow us to log the Product ID in tlogs	13 years ago
Craig Elder	4a1d8b0875	AP_InertialSensor: Return product ID from sensor initialization this exposes the product ID to the IMU Layer	13 years ago
Craig Elder	ed99940bee	MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D Rev C have non standard scaling factor that is 1/2 of the data sheet Rev D chips conform to the specification	13 years ago
Andrew Tridgell	2dd655d87d	MPU6k: added suspend/resume on init	13 years ago
Andrew Tridgell	9296ac494d	AP_InertialSensor: added a get_gyro_drift_rate() interface this returns the expected max drift rate for the particular type of gyro being used	13 years ago
Andrew Tridgell	a9dea35310	AP_InertialSensor: added new_data_available() interface	13 years ago
Randy Mackay	ed19c25a97	Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h". Modified FastSerial's write function to return size_t (number of bytes written).	13 years ago
Andrew Tridgell	6ca613337b	MPU6000: protect the driver from double initialisation initialising twice can lockup the driver	13 years ago
Andrew Tridgell	18d26dc74e	MPU6000: minor fixes the hardware functions should be private, and cs_pin should be uint8_t	13 years ago
Andrew Tridgell	04daeab7c0	MPU6000: change to 98Hz low pass filter based on recommendation from Pat	13 years ago
Andrew Tridgell	10ca54ef8f	MPU6000: use data ready interrupt to prevent stale data We listen for a data ready interrupt and only read new data in read() if there is new data	13 years ago
Andrew Tridgell	f97b405b56	MPU6k: update driver for new ap_proceduce prototype	13 years ago
Andrew Tridgell	bc9e943969	rollover is not a bug subtracting unsigned numbers does the right thing	13 years ago
Andrew Tridgell	97f8d21c1b	added code format markers to AP_InertialSensor library	13 years ago
Pat Hickey	f3ad7f3af8	Wire and SPI Init: move to sketch system.pde from libraries * Wire.begin removed from AP_Baro_BMP085::init() * SPI.begin removed from AP_Baro_MS5611::init() * SPI.begin removed from AP_InertialSensor_MPU6000::hardware_init() * Both Wire.begin and SPI.begin added very early in init_ardupilot in ArduCopter/system.pde and ArduPlane/system.pde	13 years ago
Pat Hickey	82b48784ef	purple: added AP_InertialSensor library this abstracts the way of getting inertial sensor (gyro and accelerometer) data for the APM1 and purple hardware. The Oilpan code is based closely on the old APM1 code	13 years ago

16 Commits (2a216ce900a60a8bd2e8fd3231f11d072a1ded8f)