8484e8271f
Copter: fix init of RC option 52
5 years ago
08e89b0b96
Copter: Add RC option for ACRO mode in Copter
5 years ago
09bf76d9a4
RC_Channel: correct winch switch comment
5 years ago
925f76c048
Copter: integrate winch changes
...
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
5 years ago
6ea3c2a091
Copter: compile fix for winch
5 years ago
54c3d07547
Copter: make make/gimbal configurable on a per-board basis
5 years ago
12c9578a66
Copter: add in additional acro options
...
Air-mode for multicopters
Rate only for multicopters and trad-heli
if air-mode aux switch is toggled in acro do not reset air-mode on exit
5 years ago
8d2f2443a2
Copter: add air mode aux function
5 years ago
0eb03ba7d5
Copter: make SuperSimple type-safe
5 years ago
a629e91f30
ArduCopter: rename 'enum aux_switch_pos_t' to 'enum class AuxSwitchPos'
5 years ago
78fd5fac04
Copter: allow to resume in ZigZag Auto
5 years ago
7bc528097d
Copter: support zigzag auto feature
5 years ago
923237ffd3
Copter: Enumerate A and B points of ZigZag
5 years ago
9b64ca040d
Copter: do not adjust trims while landed
...
Closes #1282
Also cancels autotrim if you change modes, disarm the vehicle or land
again.
5 years ago
c4b5d47e1f
Copter: white space fixes
5 years ago
132fe82ad2
Copter: Report what channel is used for rudder arming
5 years ago
4c1816a983
Copter: port betaflight in-flight fft analysis to arducopter and expose as a log message
...
add harmonic notch tracking mode
call AP_GyroFFT::update_freq_hover() from update_throttle_hover()
move gyrofft configuration and control to AP_Vehicle
move fft logging to fft library
5 years ago
64f98622c0
Copter: fix tradheli RSC RC passthrough mode
...
Copter: heli get_pilot_desired_rotor_speed converts interlock input to desired rotor speed
5 years ago
eb452478ac
Copter: override do_aux_function_armdisarm method to set armed_with_switch
...
As well as removing the code duplication, this only sets the flag if
arming was actually successful. armed-with-switch is used when setting
various state, and it isn't entirely clear that we only use it when
armed. This would seem to be a safer option.
5 years ago
0d04ef19fe
ArduCopter: let RC_Channel indicate AUX_FUNC::ARMDISARM needs no initialisation
...
All users set this.
5 years ago
610366e4bd
Copter: init aux function cases in alphabetical order
5 years ago
4a51de724d
Copter: move support for ADSB Avoidance enable up to RC_Channel
5 years ago
e6c6189fe5
Copter: cope with change in namespace of LogEvent enum
...
Also move Acro Trainer types into an enum class as the global defines
interfere with the Event names.
Also eliminate the Log_Write_Event wrappers.
5 years ago
b6920e14c8
Copter: remove redundant SurfaceTracking enumeration namespacing
...
Also rename State to Surface to be more specific about what is being
set/tracked.
5 years ago
b42b1c08c4
Copter: Support new AP_Vehicle::set_mode
5 years ago
f7ba79e493
Copter: canonicalize on STANDBY rather than STANDY_BY
5 years ago
50a098c359
Copter: Standby functions
5 years ago
1c4f47f882
Copter: add upward facing surface tracking
5 years ago
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
5 years ago
e1b982c99c
Copter: RC_Channel: remove fence
6 years ago
4b51239920
Copter: move mission reset aux switch option to RC_Channel
6 years ago
300ee173ce
Copter: fix user aux functions
6 years ago
6dce39cbe1
Copter: use AP_Arming methods to arm and disarm vehicle
...
Really just changing the namespace of init_arm_motors
6 years ago
01909cf4c8
Copter: zigzag mode gets terrain following support
6 years ago
f1de62f0d3
Copter: added left out copter flight modes as auxiliary switch options
6 years ago
86633e45ff
Copter: Use new RC_Channel AUX_FUNC
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
6 years ago
7c09084f02
Copter: add Loiter and Follow to aux switch
6 years ago
33764d6c3b
Copter: Fix typo
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
6 years ago
f189860162
Copter: use enum class for ArmingMethod and ArmingRequired
6 years ago
ba3d1bc6c7
Copter: move E-stop state to SRV_Channel
6 years ago
845f015648
Copter: adjust for Location_Class and Location unification
6 years ago
f48d757bd4
Copter: adjust for location flags being moved out of union
6 years ago
48155e72eb
Copter: correct use of incorrect name for type
6 years ago
41cd906641
Copter: beep on mode change/change failure for aux switch changes
6 years ago
a2fa63bcf7
Copter: fix Cygwin build
...
Static initialization doesn't have an exact order, we can't rely on it
6 years ago
637dc718df
Copter: moved LANDING_GEAR to common RC_Channel
6 years ago
7017345fc9
Copter: let RC_Channel parent library do AC_Avoid stuff
6 years ago
d3f7214bcf
Copter: revamp zigzag mode
...
more accurately stops on target
uses current z target when moving to edge
loses unnecessary auto_yaw.set_mode
ensure A and B are different
6 years ago
71beab7502
Copter: create and update Zigzag flight mode
6 years ago
ec6c59faa3
Copter: move handling of disable-gcs-rc-overrides-channel-option up
7 years ago
Hwurzburg
Randy Mackay
Andy Piper
Peter Barker
Tatsuya Yamaguchi
murata
Michael du Breuil
bnsgeyer
Leonard Hall
Peter Hall
SergeyBokhantsev
Arjun Vinod
Patrick José Pereira
Francisco Ferreira
Andrew Tridgell
CAO MUQING