Peter Barker
0f5f040380
autotest: send all progress messages to autopilot
...
These will be logged into dataflash and into the telemetry log
4 years ago
bugobliterator
d997ca8779
autotest: pass calibration test even if 98% complete before success
4 years ago
Andy Piper
eab127ffa3
AP_OSD: disable OSD parameter support on 1Mb boards
4 years ago
Andy Piper
bbaaf7d66f
AP_HAL_ChibiOS: disable features on KakuteF7 and OmnibusF7v2 to mirror KakuteF7Mini
4 years ago
Andy Piper
c483c04d4b
AP_OSD: separate parameter screen
...
display parameter names and types and allow modification via stick gestures
add support for updating selected parameters
support symbolic names for cetain options with add vehicle specific labels
add support for OSD parameter access and modification over mavlink
save OSD parameter when setting
add missing serial protocols
set defaults on settings correctly
re-organise defaults for NTSC screens and add 9th parameter
allow parameter control to be disabled
add plane aux options (from vierfuffzig)
only enable osd param on bitmap enabled backends
make sure draw() is elided on non-bitmap backends
4 years ago
Andy Piper
13676f9784
AP_SerialManager: add number of serial protocols to enum
4 years ago
Andy Piper
0fa62acd7f
mavlink: update to OSD messages
4 years ago
Andy Piper
8b766efb0a
GCS_MAVLink: add support for updating OSD parameters over mavlink
4 years ago
Andy Piper
7aa98d55eb
AP_Param: expose the stable key for use by AP_OSD
...
add support for finding parameters by name and returning the token
4 years ago
Andy Piper
88d8cdadb7
AP_Camera: make runcam check for osd menu before entering osd menu
4 years ago
Andy Piper
2c19152644
AP_Arming: arming check for osd menu
4 years ago
Iampete1
8aeee4bc83
SITL: SIM_JSON:: add support for apparent wind sensor
4 years ago
Iampete1
917358e4a5
AP_WindVane: add apparent wind SITL types
4 years ago
Iampete1
2764126a1c
SITL: add apparent wind sensor support
4 years ago
Peter Barker
51b54d3740
autotest: avoid leaving message hooks around
...
Can lead to some very weird and confusing output
4 years ago
Gone4Dirt
32de8d78ab
AP_Scripting: Add Heli_IM_COL_TUNE applet and readme
4 years ago
Gone4Dirt
39788aa4f7
AP_Scripting: Add rc norm_input_ignore_trim binding
4 years ago
Andy Piper
5b5b9d57a1
AP_Scheduler: add per-task performance information accesible from @SYS/tasks.txt
...
print fully qualified name on most boards
remove old task slip message
Don't die on allocation failure.
dynamically allocation/free task info based on SCHED_OPTIONS
dynamically enable task info on ftp get
4 years ago
Andy Piper
f70f13e620
AP_Filesystem: add support for @SYS/tasks.txt
4 years ago
Randy Mackay
d53045db10
AP_Soaring: minor spelling fix
4 years ago
Randy Mackay
29a2be2d63
Copter: minor comment fix
4 years ago
Oliver Walters
8aeec6c4d1
AP_PiccoloCAN: Constrain ESC command message rate
...
Use constain_int16 rather than using primitive checks
4 years ago
Oliver Walters
21ffc0f663
AP_PiccoloCAN: Change #ifdef guard to prevent compiler error
4 years ago
Oliver Walters
fc29e40463
AP_PicolloCAN: Load PiccoloCAN parameters from EEPROM
4 years ago
Oliver Walters
09d38f8729
AP_PiccoloCAN: Fix logic to improve readability
4 years ago
Oliver Walters
818e7f2cdf
AP_PiccoloCAN: ESC message rate is now in Hz
4 years ago
Oliver Walters
5c53c17076
Remove parameters related to CAN servo operation
4 years ago
Oliver Walters
66812c72da
AP_PiccoloCAN: Specify which ESC channels are used
...
- Uses the CAN_Dx_PC_ESC_BM bitmask to determine which ESC (motor) channels are controlled over PiccoloCAN
- Only transmits messages relevent to the selected motor channels
4 years ago
Oliver Walters
17932e3d1d
AP_PiccoloCAN: ESC command rate now configurable
...
Uses CAN_Dx_PC_ESC_MS parameter to set the ESC data rate (in ms)
4 years ago
Oliver Walters
a98babc02c
AP_PiccoloCAN: Add user configurable operations to adjust Piccolo CAN ESC behaviour
4 years ago
Peter Barker
c78dcb15a1
AC_PID: remove dead get_ff(float target) method as per TODO comment
4 years ago
Randy Mackay
1c1caa9374
AP_Winch: correct Daiwa line lengtha and speed scaling
4 years ago
Andrew Tridgell
90e488d29d
HAL_ChibiOS: set airspeed type in f303-MatekGPS fw
4 years ago
Samuel Tabor
9f5b068d9e
Plane: Handle EXIT_COMMANDED return status in soaring.
4 years ago
Samuel Tabor
861b57cb09
AP_Soaring: Add EXIT_COMMANDED status used when pilot changes switch position when thermalling.
4 years ago
Peter Barker
666314216d
travis: move forward from xenial to focal
...
Big change here is moving from Python2 to Python3
4 years ago
Andrew Tridgell
0f7f9a22fd
Tools: added Matek GPS and airspeed builds
4 years ago
yaapu
bc21e505e3
AP_RangeFinder: aligned msp message data struct name to gps,baro and mag
4 years ago
yaapu
efca0c04eb
AP_OpticalFlow: aligned msp message data struct name to gps,baro and mag
4 years ago
yaapu
747bf73fec
AP_MSP: aligned opflow and rangefinder struct names to gps, baro and mag
4 years ago
Andrew Tridgell
e95a44e73c
HAL_ChibiOS: run f303-MatekGPS at 10Hz
4 years ago
Andrew Tridgell
bea9769b82
AP_Logger: log unhealthy barometers
4 years ago
Andrew Tridgell
7ae64d20aa
AP_Vehicle: init MSP earlier
...
this allows for MSP sensors (baro, compass) to be ready during probe
4 years ago
Andrew Tridgell
a9ca78532e
Tools: added MSP bus type to decode
4 years ago
Andrew Tridgell
4b1552eebe
AP_HAL: added BUS_TYPE_MSP
...
for MSP sensors
4 years ago
Andrew Tridgell
c7b03dc936
AP_OSD: added missing OSD types to param docs
4 years ago
yaapu
5e88a856e9
AP_Compass: support for MSP compass
4 years ago
yaapu
ea53ce2a3f
AP_Baro: support for MSP barometer
4 years ago
Andrew Tridgell
94670879f8
AP_GPS: allow hwdef.dat override of GPS rate
4 years ago
yaapu
85b61d6bf3
AP_GPS: added support for MSP GPS sensors
4 years ago