c1a25c25f7
AC_Fence: return failure message
8 years ago
8171645876
AC_Fence: pre-arm check requires GPS if polygon fence enabled
8 years ago
69925d8b27
AP_Arming: shorten Accels failure message
...
This allow the message to fit on the MP HUD
8 years ago
c7a73e84d6
AP_NavEKF3: apply height innovation floor only when barometer is in use
8 years ago
c53125f3b5
AP_NavEKF2: apply height innovation floor only when barometer is in use
8 years ago
5809e2465b
AP_RPM: replace board ifdef with feature ifdef
8 years ago
f91d23daab
AP_HAL: add HAL_PX4_HAVE_PWM_INPUT
8 years ago
7c246847de
AP_HAL_PX4: replace board ifdef with feature ifdef
8 years ago
7ca9c7a443
AP_HAL: add HAL_HAVE_SAFETY_SWITCH
8 years ago
ef1672befc
AP_BoardConfig: replace board ifdef with feature ifdef
8 years ago
d3e9f7ce66
AP_HAL: add HAL_PX4_HAVE_PX4IO
8 years ago
7f5b551050
AP_HAL: add HAL_PX4_HAVE_MTD_SUPPORT
8 years ago
c7fc3ffbc4
AP_HAL: add HAL_HAVE_BOARD_VOLTAGE
8 years ago
37a050eed9
AP_HAL: add comments and allow for board overrides
8 years ago
2e4e4365d0
AP_InertialSensor: enable fast sampling for aerofc
8 years ago
9a83f05714
AP_BoardConfig: enable voltage monitoring on aerofc
8 years ago
7c1f255258
AP_HAL_PX4: add pin to monitor battery
8 years ago
5787b5a5c5
AP_Compass: IST8310: rename macros
...
Having "BIT" in the name gives the impression we are using the macro is
the bit position; however they have the values for those actions, not
the bit position. Rename BIT to VAL to be less confusing.
8 years ago
4bba643abb
AP_Compass: IST8310: use variable periodic callback
...
This is the equivalent of sleep and wait for the conversion time,
after had triggered a new sample request. However it also has the added
benefits of sharing a thread with other sensors on the same bus.
Now we don't read the status register anymore since we have a guaranteed
wait time.
8 years ago
ce1a13aa8f
AP_Compass: IST8310: use FSR to reject samples
8 years ago
d84851d8fa
AP_Compass: IST8310: improve initialization
...
- Make sure device is reset while initializing.
- Give better names to register macros
- Average X, Y and Z by 16: sensor is internally running at 200 sps
(theoretical, ~160 pratical). The wait time is ~6msec averaging
by 16. We do 10msec.
8 years ago
c0691afc1f
AP_Compass: reject outlier data in IST8310 data by detecting >14bit data
8 years ago
91dabbe418
AP_HAL_PX4: implement method to ajust periodic callback
...
Just setting up the periodic callback sampling time on initialization
may not work well for sensors that need to request for a sample with a
bus transaction, sleep and then read the new data. That's because the
function will be kept calling at a periodic rate, while the time in
which we can read the value is not really that sampling time, but rather
the time in which sensor was last read + the time spent in the function
before sending a new sample request.
Instead of creating a new type of thread to handle this case, just
implement the minimal and easy case of updating the period for this
callback, that can only be called from inside the callback function.
8 years ago
8415fde697
AP_Compass: IST8310 chip does not follow right-hand rule format, flip z
8 years ago
b339050e45
AP_Compass: IST8310: account for errors in measurment requests
...
If we don't recover for errors in the request for new sample, we may get
stuck with no sample anymore. Recover from bad transfers.
8 years ago
2349909033
AP_BoardConfig: start mtd driver
8 years ago
da68612f4b
AP_BoardConfig: make error function public and static
...
So it can be used by other parts of the code calling px4_start_driver().
8 years ago
fb24a03faf
AP_Baro: don't compile drivers for devices that don't use them
8 years ago
156efd6fec
AP_Compass: use IST8310 for aerofc
8 years ago
fad583b259
AP_HAL_PX4: RCOoutput_Tap: map to [ RPMSTOPPED, RPMMAX ] range
...
When it's not armed we get _esc_pwm_min from the AP_Motors library,
which would cause motors to start spinning. Map it to start from
RPMSTOPPED so it doesn't spin when it's not armed.
8 years ago
5e26940070
AP_HAL_PX4: disable safety switch for aerofc
8 years ago
a682bb837a
AP_SerialManager: uartA with 460800 baud for aerofc
8 years ago
20c5e9ec08
Add support for external mag on aerofc
8 years ago
327de91b5c
AP_HAL_Px4: use RCOutput_Tap for aerofc
8 years ago
75977cd890
AP_HAL_PX4: implement motor output for aerofc
...
This uses tap ESCs, as found on the PX4 project, translated to our
internal APIs. It doesn't have the feedback from ESCs yet.
8 years ago
ce9013b8ee
AP_HAL_PX4: add RCOutput skeleton for aerofc
8 years ago
87846fe049
AP_InertialSensor: use MPU6500 on aerofc
8 years ago
b4d0569339
AP_HAL_PX4: Use empty RCOutput driver for aerofc
8 years ago
00c2949dfb
Add support for baro on aerofc
8 years ago
b17acfee12
Add aerofc support
...
Flight Controller board that comes on Intel Aero RTF Drone.
8 years ago
2d603c1cba
SRV_Channel: fixed reversing on servo gimbals
8 years ago
1b00dfb642
AP_GPS: Fix parameter metadata
8 years ago
a9a8521383
AP_OpticalFlow: Fix parameter metadata
8 years ago
646d68c76d
AP_NavEKF2: Fix parameter metadata
8 years ago
84e5e088de
AP_BoardConfig: Fix parameter metadata
8 years ago
1a781f44cc
AP_Notify: Correct the display area clear of the text message.
8 years ago
c0238be345
AP_FrSky_Telem: fix sending messages 3 times
...
Initialize variable
Also some small style changes
8 years ago
02c0885cfd
AP_Frsky_Telem: fixes #5862
...
MAVLink strings of exactly 50 characters are not NULL terminated, so
instead we must check that the 50th character has been reached.
8 years ago
5029dd1bab
AP_HAL_PX4: GPIO: return correct FMU pin read even if IO not connected/detected
8 years ago
2aec41e0ef
AP_HAL_SITL: Fix SIM_GPS_DISABLE not disabling the ublox GPS with PVT support
8 years ago
Randy Mackay
Jonathan Challinger
Lucas De Marchi
Tom Pittenger
Andrew Tridgell
Jacob Walser
murata
Francisco Ferreira
Florent Martel
Siddharth Bharat Purohit
Michael du Breuil