d2a1cdf906
MotorsHeli: replace throttle_control_input with throttle_in
...
throttle_control_input was 0 to 1000 range, throttle_in is 0 to 1
9 years ago
a66da7be00
AP_Motors: correct parameter documenation
9 years ago
5148e41c1a
AP_Math: Cleaned macro definitions
...
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
9 years ago
7c9ee9363b
AP_Motors: added rc_map_mask() function
9 years ago
dfccf8f713
AP_Motors: also wrap set_freq and enable_ch for motor mapping
9 years ago
d31ba2b380
AP_Motors: added rc_write function
...
this is intended to make remapping motors and rescaling output easier
9 years ago
79c90d37f6
AP_Motors: apply HELI_RSC output type if available
9 years ago
ed7cd8d3f4
AP_Motors: fix invalid Range meta data
9 years ago
3a13db9333
AP_MotorsHeli: Add more parameter checks.
9 years ago
47b9f6598a
AP_Motors: allow change to heli rotor speed controls while armed
...
this helps a lot with tuning for gas helis
9 years ago
b89b0d7f9e
AP_MotorsHeli_Single: Move Servo_Test static variables to be class members
9 years ago
bb7f8c1999
AP_MotorsHeli: Create Servo Test functionality
9 years ago
eeb544d098
AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode.
9 years ago
22729e6927
AP_MotorsHeli: Change servo manual #defines into enum
9 years ago
750728fa1e
AP_MotorsHeli_Single: Add motor enable aux output functionality
9 years ago
ca28a49fa6
AP_Motors: Circular swash-plate limits for AP_MotorsHeli
9 years ago
831d8acca5
Remove use of PROGMEM
...
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
9 years ago
ca942f39dd
AP_Motors_Heli: remove unused allow_arming check
9 years ago
f43f6c53f7
AP_Motors: Group writes to motors
...
Surround calls to rcout->write() with rcout->cork() and rcout->push().
If the RCOutput implementation allows the writes are grouped and only
sent together to the underlying hardware.
9 years ago
43268b9822
AP_MotorsHeli: get rid of _motor_to_channel_map
9 years ago
9da2b2b430
AP_Motors: added H_GYR_GAIN_ACRO
10 years ago
e3ff4ed9c4
MotorsHeli: integrate RotorControlState
10 years ago
bde43412d8
AP_MotorsHeli: Fix RSC Mode 3
10 years ago
38ccd6e04f
AP_MotorsHeli_RSC: Fix tail_type control
10 years ago
535da1d79a
AP_MotorsHeli_Single: DDVPT to use it's own ramp and runup times
10 years ago
28318c4116
AP_MotorsHeli: Move Output functions into parent class
10 years ago
84102c3e3f
AP_MotorsHeli: Rework how servo setup is done.
10 years ago
345663f705
AP_MotorsHeli: Simplify servo init/reset
10 years ago
b11600aebe
AP_MotorsHeli: Move set_delta_phase_angle into _Single class
10 years ago
3756c6b3f3
AP_MotorsHeli: Create RSC Throttle Curve mode for controlling gas engines.
10 years ago
f853979816
AP_MotorsHeli: run RSC Control function in Output Min function
...
Move Output_Min() function into Heli_Single class as it will eventually be overloaded by other helicopter class types.
10 years ago
315f0408ae
AP_MotorsHeli: RSC controller to use speed ramp as simple float scalar
10 years ago
91c7663ca2
AP_MotorsHeli: Set range of new RSC Servo object.
10 years ago
cefa0c28a6
AP_MotorsHeli: RSC Mode 0 no longer a valid mode
10 years ago
064cc63512
AP_MotorsHeli: Colyaw function to check if rotor speed control is above idle
10 years ago
77e4bf39aa
AP_MotorsHeli: rework RSC output() function to implement idle speed function
...
Also, split out speed_ramp function
10 years ago
c3e7eed299
AP_MotorsHeli_Single: Fix recalc_scalars function
10 years ago
27f8d6bcd5
AP_MotorsHeli: Change RSC output() function into a state machine.
10 years ago
10b0be9e75
AP_MotorsHeli: Fully detail tradheli output functions and move manual servo handling
10 years ago
7dda0f651a
AP_MotorsHeli: Rename tradheli servo objects for clarity
10 years ago
457d939e77
AP_MotorsHeli: Update includes so that it builds
10 years ago
411947ea7c
AP_Motors: Rename output_yaw to move_yaw in AP_MotorsHeli_Single.
10 years ago
97e09fa9b0
AP_Motors: Move traditional helicopter controls into AP_MotorsHeli_Single.
...
Original commit by fhedberg, had to fix merge conflicts and now it appears I did the commit?
10 years ago
af69a20ba5
AP_Motors: Break out yaw output in AP_MotorsHeli.
10 years ago
feb32f40ed
AP_Motors: Break out servo init and reset in AP_MotorsHeli.
10 years ago
ae9a16dc27
AP_Motors: Move rotor speed control into AP_MotorsHeli_RSC.
10 years ago
1e619c6c59
AP_Motors: standardize inclusion of libaries headers
...
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
10 years ago
abb6eba291
AP_MotorsHeli: Change allow_arming check to use _rotor_speed_estimate
...
In future, this will be used to check actual rotor speed (measured) if available, to prevent trying to arm with the rotor spinning.
10 years ago
992c9c75bb
AP_MotorsHeli: Create parameter_check method.
10 years ago
e2fe640e6c
Copter: Clean up helicopter allow_arming() function
10 years ago
Leonard Hall
Peter Barker
dgrat
Andrew Tridgell
Don Gagne
Robert Lefebvre
Jolyon Saunders
Lucas De Marchi
Randy Mackay
Fredrik Hedberg
Gustavo Jose de Sousa