Scott Parlane
6554c535a1
AP_InertialSensor: BMI160: Remove linux-only restriction
4 years ago
Hwurzburg
400cf31df1
AP_Scripting: Add mission selection applet
4 years ago
Andy Piper
b6ec06ac0f
AP_Vehicle: output rcout banner when initialization is done
...
move down ready message
4 years ago
Andy Piper
68fd87091c
AP_HAL_ChibiOS: output initializing from PWM banner when not available
4 years ago
Andy Piper
b9598dac00
RC_Channel: add turtle mode to RC option 150
4 years ago
Andy Piper
a51e58022f
AP_HAL_ChibiOS: add accessor for reversed mask
...
allow mask updates to be disabled
send dshot commands even if armed - they will be accepted as long as throttle is at zero
only accept low-priority dshot commands while disarmed
apply reversed and reversible mask as servo channels
4 years ago
Andy Piper
09e0135ecb
AP_HAL: add accessor for reversed mask
...
allow mask updates to be disabled
document mask types
define DSHOT_ZERO_THROTTLE
4 years ago
Andy Piper
5ece42bce0
RC_Channel: add turtle mode
4 years ago
Andy Piper
513aa592e4
AP_Motors: add accessors for turtle mode
4 years ago
Tom Pittenger
00cc8a4042
AP_BattMonitor: fix mppt sequence bug
...
closes https://github.com/ArduPilot/ardupilot/issues/18283
4 years ago
Pierre Kancir
bff899e8f2
AP_OSD: check for nullptr before using it
4 years ago
Pierre Kancir
99456ba1f8
AP_Logger: fix MAVLink logger random failure on SITL
...
rand() return an int
4 years ago
Pierre Kancir
8216905f47
AP_NavEKF3: remove unecessary assignements
4 years ago
Pierre Kancir
d95f503a32
AP_NavEKF2: remove unecessary assignements
4 years ago
Pierre Kancir
adf86357aa
AP_ESC_Telem: prevent possible overrun
4 years ago
Pierre Kancir
7739ddefd0
AP_ESC_TELEM: prevent overrun, esc_index should be < to ESC_TELEM_MAX_ESCS
4 years ago
Pierre Kancir
a0175441a0
AP_ESC_Telem: fix out of bound access
4 years ago
Randy Mackay
b399649c36
AP_Torqeedo: increase speed cmd at 50hz
...
under human control the tiller/battery only sends at 3hz but in testing it is capable of at least 50hz (but not as much as 100hz)
4 years ago
Peter Barker
29aed55a74
AP_AHRS: remove pointless zeroing of gyro_estimate vector
...
This value is assigned to in the following "if" block in both the for
and against cases, and isn't used to determine the new value.
4 years ago
Peter Barker
73bad9fd2d
AP_AHRS: move fly_forward flag to front end
...
This same flag is requested by the DAL so AN_NavEKF2 and AP_NavEKF3 can
use it in their estimates - so AP_AHRS_DCM accessing it via the same
mechanism is not out-of-shape
4 years ago
bugobliterator
6bbfe35c73
AP_Logger: do not use AP_Scheduler for AP_Periph builds
4 years ago
Peter Barker
1db7e9e2e2
AP_NavEKF: log EKF data source set changes
4 years ago
Peter Barker
110d48e6fa
AP_Logger: add events for changing EKF data source set changes
4 years ago
Peter Barker
e9c56a2b0a
AP_AHRS: move takeoff/touchdown flags to frontend
4 years ago
Pierre Kancir
c19391d540
AP_Filesystem: correct file open flags for append
4 years ago
giacomo892
8da8b34b49
AP_OSD: Add option to disable Crosshair on horizon element
4 years ago
Hwurzburg
42128a70b8
RC_Channel: add CRUISE mode RC AUX Function switch
4 years ago
Leonard Hall
ad2a152751
AP_Math: Spelling fix
4 years ago
Leonard Hall
71ccffd7c9
AC_AttitudeControl: AC_PosControl: support Control: Refactor to use Jerk
4 years ago
Leonard Hall
a1b47f36ef
AC_WPNav: support Control: Refactor to use Jerk
4 years ago
Leonard Hall
8961695369
AP_Math: Control: Refactor to use Jerk
4 years ago
Leonard Hall
3a8924c185
AP_Math: Control: protect against divide by zero
4 years ago
Leonard Hall
32b2510893
AC_WPNav: Fix Angle Vel units on function
4 years ago
Leonard Hall
f57175a84f
AC_AttitudeControl: Fix Angle Vel units on function
4 years ago
Pierre Kancir
0a922426a2
AP_Beacon: fix comparison order to prevent using wrong beacon_instance first
4 years ago
Pierre Kancir
4bccdada16
AC_Avoidance: do fence pointer check before using it
4 years ago
ES-Alexander
600df16604
Add pressure offset based on device P-mode
4 years ago
ES-Alexander
5fd32d3f36
Enable offset based on P-mode
4 years ago
Andrew Tridgell
4f4a0a02f6
AP_GPS: added doc message for bit 2 of DRV_OPTIONS
4 years ago
Andrew Tridgell
1479566921
AP_GPS: added GPS_DRV_OPTIONS bit for forcing ublox GPS to 115200
...
this may help with some GPS modules
4 years ago
Andrew Tridgell
79b0571d7e
HAL_ChibiOS: added Swan K1 support
4 years ago
Andrew Tridgell
36dcc0d16d
AP_RCProtocol: make SBUS frame gap configurable
4 years ago
Peter Barker
784c56f6d0
GCS_MVALink: remove virtual from send_simstate
...
No longer overridden by anyone
4 years ago
Randy Mackay
2a2cde68ef
AP_NavEKF3: skip GSF reset count check if source actively changed
...
also only fail all compass on emergency reset
4 years ago
Peter Barker
ecd488b3c3
AP_AHRS: move trim-related functionality to front end
4 years ago
Andy Piper
7dea029626
AP_HAL_ChibiOS: probe for compasses on FlywooF745
4 years ago
Leonard Hall
4e06140c6c
AP_Hal_ChibiOS: Skyviper Parameters PSC_VELXY_FLTE
4 years ago
Leonard Hall
870888efeb
AC_AttitudeControl: AC_PosControl: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
4 years ago
Leonard Hall
d21b07db98
AC_PID: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
...
Follow used guided but references the maximum velocity settings. As Guided does not set maximum velocities these values come back as zero. So we need to reference WP_Nav to get safe maximums.
4 years ago
Iampete1
88a5372ab7
AP_AIS: log base station report message
4 years ago