ac82d1a65d
HAL_SITL: moved SITL baro to AP_Baro_SITL
8 years ago
ee4161fa62
AP_Baro: moved SITL baro to standard sensor backend model
8 years ago
62b826953d
AP_InertialSensor: use AP_Math rand_float()
8 years ago
2fcecaa7c5
AP_Math: added rand_float()
8 years ago
c1b6684b9f
SITL: added temperature control parameters
8 years ago
7e24be95c9
AP_Param: added macro for var table extension in object
8 years ago
04cb1027b8
Copter: minor fix to release notes
8 years ago
f2131ed2d0
Copter: AC3.5-rc5 release notes
8 years ago
37166301c9
HAL_PX4: use sensor_config_error()
8 years ago
cbea29ad71
AP_Baro: use sensor_config_error()
8 years ago
e32e2f5b5d
AP_BoardConfig: added sensor_config_error()
...
used to notify user of fatal sensor setup error
8 years ago
bffc5daeb0
AC_WPNav: unset yaw when setting new origin and destination
...
This ensures that old yaw targets are not used in the short interval before they are initialised in advance_wp_target_along_track or advance_spline_along_track
8 years ago
1691a39b36
AP_GPS: spell in comments
8 years ago
23b7f1e645
AP_NavEKF3: Improve comments, typos
8 years ago
ce37517268
AP_NavEKF2: Improve comments, typos
8 years ago
a6eb337438
AP_Notify: remove unused variables
8 years ago
bfd8d151c8
AP_InertialSensor: lower slave rate with fast sampling
...
On an invensense IMU with fast sampling we need to lower the slave
sample rate for slave sensors such as the built-in AK8963 compass on a
MPU9250.
The slave rate is set as a multiple of the main rate, so it needs to be
much lower for fast sampling. If we leave it high then it greatly
impacts on IMU sample rate.
Without this change a MPU9250 with fast sampling and a compass enabled
will give a gyro rate of around 7200Hz. With this change it gets 7760Hz
8 years ago
ece0e84ddf
AP_Notify: reindent (NFC)
8 years ago
ce5739f1a0
AP_Notify: remove semaphores protecting pixels
...
The semaphore-take-forevers were absolutely killing performance.
We can take some random pixel corruption to avoid vehicles crashing.
8 years ago
519a293af9
AP_InertialSensor: fixed instance usage in set_gyro_oversampling()
...
thanks Francisco!
8 years ago
112b22516a
AP_InertialSensor: fixed use of accel2_noise
...
thanks Francisco!
8 years ago
a3f4a523b2
AP_Notify: convert unknown characters to spaces
8 years ago
b3ce03bfb0
Sub: stop appending lf to PERF message
8 years ago
378015691b
Plane: stop appending lf to PERF message
8 years ago
b37e64b23c
Copter: stop appending lf to PERF message
8 years ago
5a02219642
AP_HAL_Linux: use HAL_SEMAPHORE_BLOCK_FOREVER
8 years ago
3ff4cd8c07
AP_HAL_PX4: use HAL_SEMAPHORE_BLOCK_FOREVER
8 years ago
b11ca5d538
AP_HAL_QURT: use HAL_SEMAPHORE_BLOCK_FOREVER
8 years ago
2f79a5bd90
AP_HAL_SITL: use HAL_SEMAPHORE_BLOCK_FOREVER
8 years ago
85e5de15c4
AP_HAL_VRBRAIN: use HAL_SEMAPHORE_BLOCK_FOREVER
8 years ago
f130b4a580
Tracker: move init of DataFlash references into vehicle init
...
This makes it look like the other vehicle types
8 years ago
652292e5c0
Sub: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
8 years ago
74e0d6c60a
Rover: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
8 years ago
084242cf03
Plane: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
8 years ago
069e0d1973
Copter: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
8 years ago
ee16205438
Tools: ardupilotwaf: include startup tone in ROMFS
8 years ago
5b67b33310
AP_GPS: Remove un-used AP_GPS::inject_data_all() function
8 years ago
5261654756
AP_GPS: Only inject RTCM data to the selected GPS device defined in GPS_INJECT_TO parameter
8 years ago
12f83ecf75
AP_GPS: SBF if RAW_DATA is enabled check that the GPS is succeeding at logging
8 years ago
708b483d77
Plane: prepare for 3.8.0beta5
8 years ago
6ccb7cf3f4
Copter: tidy dataflash Frame reporting
8 years ago
ac1484f60e
DataFlash: clear format sent mask when backend starts new log
8 years ago
2876f1467c
AP_InertialSensor: converge sensor rate quickly, then slowly
...
converge fast for the first 60 seconds, then more slowly to reduce
noise
8 years ago
db25b6e966
AP_InertialSensor: estimate and log sensor rates for all IMUs
...
this adds IMU.GHz and IMU.AHz log fields so we can see the actual
observed sensor rates of each IMU
8 years ago
0a83281a29
DataFlash: added logging of actual sensor rates
8 years ago
49cc0965c0
AP_InertialSensor: separate handling of FIFO and non-FIFO sensors
...
FIFO sensors produce data at a well known rate, but samples come in
bunches, so we can't use the system clock to calculate deltaT.
non-FIFO sensors produce data when we sample them, but that rate is
less regular due to timing jitter.
For FIFO sensors this changes makes us use a learned sample rate,
which allows for different clock speeds on sensor and system board.
For non-FIFO sensors we use the system clock to measure deltaT
the overall effect is a fix for sensors that produce samples at other
than the claimed datasheet rate.
8 years ago
74eb7a7243
AP_InertialSensor: make SITL sensor rate match a Pixhawk1
...
use 760Hz 2nd gyro and 800 Hz 2nd accel
8 years ago
25cd16a275
AP_InertialSensor: fixed LSM303D registered sample rate
...
we are running the LSM303D at 1600Hz, and are sampling it at 1kHz. We
need to tell the AP_InertialSensor layer that samples will arrive at 1kHz
8 years ago
28030dd85c
AP_AHRS: use SIM_ODOM_ENABLE to enable visual odom in SITL
8 years ago
67404e9660
SITL: added SIM_ODOM_ENABLE
...
for enabling visual odomotry simulated data
8 years ago
Andrew Tridgell
Luis Vale Gonçalves
Randy Mackay
Dr.-Ing. Amilcar Do Carmo Lucas
Pierre Kancir
Peter Barker
Michael du Breuil