eff91e87ca
AP_Math: Control: Refactor to use Jerk
4 years ago
397cd8cbe0
AP_Math: Control: protect against divide by zero
4 years ago
8cd70f2569
AC_WPNav: Fix Angle Vel units on function
4 years ago
0ee9dbc059
AC_AttitudeControl: Fix Angle Vel units on function
4 years ago
c4cf4d6a8c
Copter: flowhold minor format fix
4 years ago
efd7042d44
Frame_params: update FILT to FLTE
4 years ago
988f2dbb7e
AP_Hal_ChibiOS: Skyviper Parameters PSC_VELXY_FLTE
4 years ago
fd5eba63f5
Copter: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
4 years ago
23732690a7
Plane: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
4 years ago
2e6e3d7b89
AC_AttitudeControl: AC_PosControl: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
4 years ago
b3a10e45ba
AC_PID: fix PID filter names FILT -> FLTE, D_FILT -> FLTD
...
Follow used guided but references the maximum velocity settings. As Guided does not set maximum velocities these values come back as zero. So we need to reference WP_Nav to get safe maximums.
4 years ago
516df460b8
AP_GPS: added doc message for bit 2 of DRV_OPTIONS
4 years ago
f735804035
AP_GPS: added GPS_DRV_OPTIONS bit for forcing ublox GPS to 115200
...
this may help with some GPS modules
4 years ago
796fdab984
AP_HAL_ChibiOS: probe for compasses on FlywooF745
4 years ago
3c5bd942a6
AP_NavEKF3: skip GSF reset count check if source actively changed
...
also only fail all compass on emergency reset
4 years ago
c00fa705b7
AP_NavEKF3: fixed output LLH to account for IMU offset
...
thanks to Paul and Randy
4 years ago
7525b7b997
Copter: Guided: Add terrain following initialization.
4 years ago
8d41b2225b
AC_AttitudeControl: Support thrust to weight of 10:1
4 years ago
d2c084bf69
AP_Motors: remove tri yaw servo from motor mask
4 years ago
a44763c47b
ArduCopter: guided auto_yaw_angle_rate timeout
4 years ago
d7c72af849
AP_GPS: added arming checks for yaw available on ublox RTK rover
4 years ago
62d89e840f
AP_RangeFinder: use separate register_driver method while contructing CAN Driver
4 years ago
f33188b95f
AP_EFI: use separate register_driver method while contructing CAN Driver
4 years ago
b8c2a18eaf
AP_BattMonitor: use separate register_driver method while contructing CAN Driver
4 years ago
cf535481e9
AP_CANSensor: create a separate register driver method
4 years ago
d94fe1e6c8
Copter: version to 4.1.0-beta6
4 years ago
0733a39fee
Copter: 4.1.0-beta6 release notes
4 years ago
c1f72d6683
AP_AHRS: build fix
4 years ago
b2c24a0b58
AP_NavEKF3: Revert IMU and wind speed process noise parameter defaults
...
These give noisier state estimates, but are more robust to rapid changes in IMU biases.
TODO implement a means of using the modified parameters when there are more than one EKF instance running with IMU's that are sampling at a higher rate.
4 years ago
ad15d62941
Tools: Rework Plane.EKFlaneswitch autotest
4 years ago
697cc5cb44
Tools: Rework Copter VibrationFailsafe test to use commanded land
4 years ago
762529a987
AP_NavEKF3: retune wind process noise for better airspeed fault detection
4 years ago
dd9cc70ad4
AP_NavEKF3: Fix bug preventing copter wind estimation at low speed
...
Also re-tunes process noise default for smoother wind velocity state estimates.
4 years ago
21dfefa5f2
Tool: Allow more time for quadplane autotest to land and disarm
4 years ago
84693ea3c4
AP_NavEKF3: Revert EK3_BETA_MASK parameter extension
...
These are not required due to use of bit 7 in FLIGHT_OPTIONS to achieve the same function.
4 years ago
645386cba6
Plane: disable EKF3 default airspeed fusion by default
...
this fusion can cause problems with wind estimation, disable by
default for now
4 years ago
d841615710
AP_NavEKF3: Rework non-airspeed wind estimation
...
Faster wind estimation when not using airspeed with acceptable noise in wind velocity estimates.
4 years ago
1812d8ea3a
AP_NAvEKF3: use #define value for bad IMU hold time
4 years ago
3e4375e453
Copter: rework ekf_check to use the EKF vibration_affected status
4 years ago
6d6699f9f9
AP_NavEKF3: Increase lower state variance limit when vibration affected
...
This makes state corrections from GPS and baro observations more aggressive
4 years ago
7abecb4e0e
AP_NavEKF3: Use sensor variance when checking for bad IMU
4 years ago
1cc7dc59a1
AP_NavEKF3: Make bad IMU status more persistent
4 years ago
6907fa8e88
AP_AHRS: Add accessor function for vibration affected status
...
AP_AHRS: fix rebase build error
4 years ago
662bda1bbd
AP_NavEKF3: Add accessor function for vibration affected status
4 years ago
f37caffb31
AP_NavEKF3: Don't update accel bias states if vibration affected
4 years ago
36ead940d6
AP_NavEKF3: Use large accel process noise when IMU data is bad
4 years ago
82ed96a927
AP_NavEKF3: Adjust gyro bias process noise tuning
...
NEw value is a compromise between roll/pitch angle and horizontal state velocity estimation errors and the noise in the gyro bias estimate
4 years ago
ed30a7ce35
Tools: relax navigation test accuracy
4 years ago
3714c1b2e2
AP_NavEKF3: Allow smaller dvel bias state variances for improved tuning
4 years ago
a24df9d633
AP_NavEKF3: Retune IMU process noise
...
Required to achieve equivalent fusion noise and weighting on IMU vs other sources to previous param defaults with the old covariance prediction equations.
4 years ago
Leonard Hall
Randy Mackay
Andrew Tridgell
Andy Piper
Josh Henderson
bugobliterator
Paul Riseborough
Paul Riseborough