8140353c64
Copter: log event when primary GPS changes
8 years ago
1d70a337dd
Copter: remove unused desired_climb_rate variable
8 years ago
0d1bcd3b94
Copter: added automatic yaw to autotune position control
8 years ago
37fca03db3
Copter: implement simple position hold during autotune
...
this holds position during tuning with low gain
8 years ago
51c00f8144
Copter: use only downward facing rangefinder
8 years ago
029aeeb4fd
Copter: support for a GCS singleton
8 years ago
f49f153da0
Copter: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
8 years ago
cb1f7ba4bb
Copter: remove setting position control's altitude max
...
AC_Avoid now takes responsibility for enforcing the alt limit and accesses inertial nav's limit directly
8 years ago
b15d341850
Copter: add avoidance adjusted climb rate
8 years ago
cc217550c0
Copter: rename arming_checks to AP_Arming
8 years ago
bd6ffc025e
Copter: start conversion to AP_Arming_Copter
8 years ago
1297a7dedb
Copter: convert the rest of motors class for tricopter
8 years ago
0f6d0c5ba9
Copter: combined tri, single, coax and multicopter into a single build
...
this allows copter to be just 2 builds, one for heli, and one for
everything else
8 years ago
5a87ae3f01
Copter: use new SRV_Channels API
8 years ago
11b635df12
Copter: correct limit status to fence status
8 years ago
a233024e05
Copter: fix compilation when fence andd proximity are disabled
...
This adds AC_AVOID_ENABLED; avoidance must be disabled if either
of fence or proximity are disabled.
Parameter definitions have been reordered to avoid compiler warnings;
this make sthe numbering non-linear
8 years ago
01bcf5e528
Copter: add arming checks for motor setup
8 years ago
217757fdc8
Copter: default FRAME_CLASS
8 years ago
0ac00dbfd6
Copter: add FRAME_CLASS parameter
8 years ago
c3b9dbf5c8
ArduCopter: Add EKF3 and remove EKF1
8 years ago
3fc17a5ed5
Copter: avoid must be initialized after fence as it use it
8 years ago
556eb88fe5
Copter: fix compile when precland is not selected
...
Fixes #5327
8 years ago
289aba4350
Copter: support for NAV_CMD_PLACE
8 years ago
74c9c4aa9d
Copter: add beacon data flash logging
...
Added to Copter vehicle because currently only used by Copter
8 years ago
21c7ea1df7
Copter: integrate AP_Beacon
8 years ago
bcea3ac8d4
Copter: handle rangefinder glitches in alt tracking
...
this handles glitches from the rangefinder when tracking the
ground. It requires 3 readings in a row to settle on a new target
altitude
thanks to discussions with Leonard and Randy
8 years ago
7485de3498
Copter: add send_proximity to send distances to GCS
8 years ago
218c8b2d16
Copter: proximity pre-arm check displays closet object
8 years ago
e72f5a6240
ArduCopter: enable/disable precision loiter on a switch
...
A switch MUST be assigned for precision loiter to be enabled
8 years ago
9e4628af58
Copter: precision loiter
8 years ago
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
8 years ago
920868145c
Copter: support for AP_Gripper
8 years ago
1bb6350a67
Copter: periodically call stats update
8 years ago
df07cb525a
Copter: use AP_Stats to store statistics about vehicle
8 years ago
34718b130a
Copter: update sensor status error flags independently of sending a sys_status message
...
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
8 years ago
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
8 years ago
fec24437f2
Copter: load accel throttle I term from attitude controller input
...
Previously we loaded up the I term from the pilot's input but a more reliable method is to get what was passed into the attitude controller. In particular the addition of the acro-thr-mid parameter means the pilot's input must be interpreted differently for different flight modes.
8 years ago
a124001b8b
Copter: get_pilot_desired_throttle gets thr_mid argument default
8 years ago
5c47f3f9e5
Copter: add acro throttle and yaw expo and smoother manual pilot throttle
8 years ago
0aab175051
Copter: move proximity to g2
8 years ago
f2ef8eec8c
Copter: use velocity output from AC_PrecLand
8 years ago
a07ecfe2b3
Copter: log proximity sensor at 10hz
...
This is current in the Copter vehicle code but we can move to the dataflash library when other vehicles start using this type of sensor. Until then adding it to common will just increase the dependencies unnecessarily for other vehicles.
8 years ago
fcc2a1b378
Copter: integrate AP_Proximity into main vehicle
8 years ago
26c3295042
Copter: ignore first ekf core switch
...
The ekf core is initialised to -1 but after initialisation changes to zero. Ignore this first change.
8 years ago
d74ae535d1
Copter: log EKF lane switch
8 years ago
35864c6226
Copter: move check_ekf_reset to ekf_check.cpp
...
No functional change
8 years ago
7148cc6239
Copter: Return value is changed to Enum Value.
8 years ago
f18e0dadc9
Copter: added optional AdvancedFailsafe for copter and heli
9 years ago
893614897e
Copter: moved MAV_TYPE to Copter.h
9 years ago
a14ff8ac77
Copter: fixes for Frsky_Telem API changes
9 years ago
Randy Mackay
Peter Barker
Andrew Tridgell
Francisco Ferreira
Pierre Kancir
floaledm
Mathieu OTHACEHE
Leonard Hall
Jonathan Challinger
murata