766ccea3be
Mission: fix bug causing first do-cmd to be run many times
...
The symptom was that if the very first command in the mission was a
do-command, it would be run after every nav-command that didn't have
another do-command before it.
10 years ago
429346f4bc
AP_Mission: add missing breaks to case statement
10 years ago
0acfcbfa81
NavEKF: use primary compass instead of first instance
...
Thanks very much to staroselskii for finding this bug
10 years ago
cedc9a8670
Compass: add last_update_usec per instance
10 years ago
69cfe11455
AP_Arming: raise accel arming threshold to 0.75
...
arming issues due to accel inconsistency are too common
10 years ago
18de1c2c47
GCS_MAVLink: send AHRS2 even if we don't have a secondary position
10 years ago
6009ae55b1
AP_Math: fixed build of eulers example sketch
10 years ago
cc0ab26f5d
Mount: fix init of mode
...
Mode was being set from MNT_DEFTL_MODE parameter before that parameter's
value had been initialised from eeprom
10 years ago
9e5d13c1de
RCOutput_Bebop: use CLOCK_MONOTONIC instead of CLOCK_REALTIME
...
CLOCK_MONOTONIC is not affected by discontinuous jumps in the system time.
10 years ago
14882bc6a8
AC_AttitudeControl: Remove unused takeoff jump #define
10 years ago
e1902e2289
AP_MotorsHeli: Remove unused _dt variable.
10 years ago
7d2fe3cc2b
AP_GPS_UBlox: remove unused member
10 years ago
2c33250bee
AP_GPS_UBlox: send_next_rate_update always runs all steps
...
Moving the if, endif checks within the case statement ensures the state
machine goes through all 10 states
10 years ago
4b015d2091
AP_GPS: remove compiler warnings
10 years ago
df3a04e284
AP_GPS: reduce fake Ublox hdop to 130
10 years ago
5ccc58ffb4
AP_GPS: Read actual hDOP value from UBLOX messages
...
Before we were reading the position DOP and calling it hDOP. Since the
other drivers actualy read hDOP it seem best to do the same.
Fixes issue 462.
10 years ago
610595bfb9
AP_NavEKF: Prevent position drift between arming and takeoff when using OF
10 years ago
2b4aaf2368
SITL: add vibe monitor and SIM_ACC2_RND to sitl
10 years ago
8b4b0b9576
AP_NavEKF: Add accelerometer clip monitoring and isolation
...
Isolates an accelerometer that is clipping and attempts to use the one that is clipping less.
10 years ago
72820303d4
AP_HAL_Linux: set higher SPI speed for Navio
...
We can set a higher speed on newer Linux kernels since
52469b2a38
10 years ago
0028910428
AP_InertialNav: take reference to variable we are trying to update
...
There are no callers to this function. Perhaps it should be removed?
10 years ago
4e0c2c5a9b
AP_HAL: defined default log and terrain directories for bebop
...
the /var filesystem is wiped on boot on Bebop. Use these as a
temporary workaround
10 years ago
6df33dd3f4
AP_InertialSensor: fixed MPU6000_SPI bus initialisation
...
we need _spi for get_semaphore()
10 years ago
954ec71630
HAL_Linux: added rcout implementation for bebop
10 years ago
51c3c499e2
AP_Compass: support AK8963 on I2C
10 years ago
0b41da0dea
AP_Compass: rework to make the bus generic for AK8963
...
Supporting only MPU9250, prepare to implement another bus, i.e i2c on the
bebop
10 years ago
0cd584c293
AP_Compass: fix rotation for bebop AK8963
...
Set the correct rotation for bebop
10 years ago
7dd0b5fae6
AP_Compass: removed _spi_sem and _spi
10 years ago
d407737434
AP_Baro: added MS5607 support
10 years ago
3cf952d1f8
AP_InertialSensor: add fifo support for MPU6000
...
And remove the use of data rdy in this case
10 years ago
8a76ff53bd
AP_InertialSensor: add i2c bus driver for MPU6050
10 years ago
1679728730
AP_InertialSensor: Configure SPI as a generic bus for MPU6000
...
Add the possibility to implement an i2c bus communication for the
MPU6050 on parrot bebop
10 years ago
f0bed711cf
AP_HAL: added AK8963 I2C defines
10 years ago
e0b59942b0
AP_HAL: changed log directories for bebop
10 years ago
5c414b4ca2
AP_HAL: Fix Compass I2C address for Bebop
10 years ago
8d6123928f
AP_HAL: Add i2c bus numbers and addresses
10 years ago
bef8001a09
AP_HAL: added MS5607 baro define
10 years ago
eea7ea8488
AP_HAL: split MPU6000 INS defines for I2C and SPI
10 years ago
7275e33e79
AP_HAL: add the possibility to have more than 1 i2c
...
Bebop drone has 3 i2c
10 years ago
a6f62c208e
AP_HAL: added bebop Linux board type
10 years ago
b32259307d
AP_GPS: Add baudrate 230400 for GPS
...
Needed by bebop gps by default
10 years ago
282efe2d57
AP_Baro: fixed example to run accumulate at 50Hz
10 years ago
c83d5b1f08
AP_Compass: only build AK8963 driver on Linux
...
must match MPU9250 build
10 years ago
f4a9f9876f
HAL_PX4: make usb_connected() more robust
...
thanks to a suggestion from Phillip Kocmoud, this should fix issues
with the XUAV-X2
10 years ago
2f8a7f316f
Notify: enable toshibaLED for NAVIO
10 years ago
402f46c56f
AP_Airspeed: fixed a typo in the ARSPD_DEFAULT_PIN define
...
There was a redundant elif for Linux builds.
10 years ago
1d732ddf62
Mount: param desc rename from MAVLink to 3DR Solo
10 years ago
1b0f482d37
AP_RangeFinder: Add support for HC-SR04 Range Finder connected to BBB
10 years ago
d192b3ccea
Compass: set device id for ak8963 and hmc5843
10 years ago
ad1f9c4829
DataFlash: add ORGN message
10 years ago
Randy Mackay
Andrew Tridgell
Jean-Baptiste Dubois
Robert Lefebvre
Andy Piper
Paul Riseborough
Staroselskii Georgii
Peter Barker
Julien BERAUD
mirkix