ardupilot

Commit Graph

Author	SHA1	Message	Date
Andrew Tridgell	8dd62829f9	MAVLink: removed MAVLink 0.9 message definitions we are now 1.0 only	13 years ago
rmackay9	bb05dab924	AP_Mount: addition of Amilcar's mount_type set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).	13 years ago
Jonathan Challinger	9cd98e79dd	AHRS: normalise GA_b before computing error vector only if too large When GA_b is small the direction of the vector is unreliable, so normalising can exacerbate the error in the direction	13 years ago
Andrew Tridgell	175b6d2606	AP_AnalogSource: fixed reporting of VCC the VCC pin number should not be converted	13 years ago
Andrew Tridgell	5f5ab9c07c	AHRS: if we don't have gps correction enabled, zero the yaw correction	13 years ago
Andrew Tridgell	c937738732	AHRS: allow the gps/accelerometers to control yaw when rolled this solves a problem with yaw estimation when at high roll angles, when the compass code becomes ineffective	13 years ago
Andrew Tridgell	151a50b6af	MAVLink: imported updated generated mavlink C code no functionality changes	13 years ago
Jason Short	c9d3ab5413	Oilpan ADC parameters added including a function that configures each Accel Axis Defaults matching old behavior Added param group	13 years ago
Jason Short	148da2e4a0	Lead Filter: simplified calculation	13 years ago
Andrew Tridgell	819b6459b2	GPS-UBlox: removed duplicate config messages these were left over from debugging	13 years ago
Amilcar Lucas	3de23220ed	RC_Channel parameters: Fix a typo	13 years ago
Amilcar Lucas	22d2f9ea15	Support up to 7 aux servo outputs	13 years ago
rmackay9	e61cf0e1f9	AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux) For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.	13 years ago
Amilcar Lucas	461098b289	Replace long with int32_t	13 years ago
Amilcar Lucas	724c5f6490	Use ascending order in the values	13 years ago
Amilcar Lucas	1da0ce20ce	Improve parameter documentation, it still does not work, but is an improvement. I just do not understand why these parameters do not appear in Mission planner :(	13 years ago
Michael Oborne	9e4d118fdb	Airspeed Library - fix param names. The Group definition give the start of the param name. This way we can maintain multiple instances if required of the same library as options.	13 years ago
Andrew Tridgell	feb456de56	Airspeed: Added AP_Airspeed sensor library this will allow an airspeed sensor object to be passed to AHRS for dead reckoning	13 years ago
rmackay9	acef75319c	AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel!	13 years ago
rmackay9	669ffb5ef8	RC_Channel_aux: added enable_out method to help stop servos from moving before the mount has initialised. changed parameter names of "update_aux_servo_function" to make it more clear that any 4 servos can be passed in (not just servos 5~8). Also allowed NULL servos to be passed in as parameters because we only need 3 in ArduCopter.	13 years ago
rmackay9	5616b1769b	AP_Camera: changed "int" to "int16_t" and "long" to "int32_t" here and there.	13 years ago
Andreas M. Antonopoulos	c73f7ef3ab	AP_Limits library, provides modular "limits" such as altitude and geo-fencing.	13 years ago
Michael Oborne	a469682b7b	fix param config names	13 years ago
Robert Lefebvre	ed235a3924	Change to prevent Tricopter servos from going hard-over during Disarmed state. Believe this was an oversight when the change to AP_Motors went in.	13 years ago
Robert Lefebvre	8ce9aae2f7	Instituting Yaw Differential on Multirotors. Intent is to stop "rise on yaw input". Since motors with increasing speed due to yaw input seem to generate more thrust that motors that slow lose thrust, thus net thrust goes up, causing copter to climb. Values are a guesstimate, proven out by test flying. This could probably become a parameter.	13 years ago
Andreas M. Antonopoulos	d4a0cb5db1	Added Michael Pursifull's Maxsonar HRLV model support	13 years ago
rmackay9	6f8d0a02a4	AP_Camera: moved seme constructor initialisers around to remove compile warnings	13 years ago
rmackay9	4dd4c95d5c	AP_AnalogSource_Arduino: fix to allow analog port to be read to be specified as a "channel" (i.e. A0) Also fixed example range finder sketch to work with interrupt enabled AP_AnalogSource_Arduino class	13 years ago
Amilcar Lucas	cc02d85cdf	AP_Mount: add support for non-spring-loaded joysticks	13 years ago
Amilcar Lucas	9a41cbffdf	RC_Channel: improve parameter documentation	13 years ago
Amilcar Lucas	46d20c2d6b	Remove unused function, remove unnecessary angle wrapping.	13 years ago
Amilcar Lucas	bccb07cbd0	Allow mount control when no AHRS exists Allow mount control on non stabilized axes	13 years ago
Andrew Tridgell	a72f6acef6	AP_Math: added get_distance_cm() to return in centimeters	13 years ago
Andrew Tridgell	165604a55c	AHRS: fixed HIL build	13 years ago
Andrew Tridgell	0f9fb2c64b	AHRS: added AHRS_GPS_GAIN parameter this allows control of how much GPS velocity information is used in doing centripetal correction in DCM	13 years ago
Andrew Tridgell	e1725e9ea5	AP_Param: added some docs on the eeprom header format	13 years ago
Craig Elder	6d3fdfc03a	DataFlash: The current method for checking if chip erase worked is producing false positives. We are forcing the block erase until we have a deterministic test method.	13 years ago
Amilcar Lucas	af338939be	RC_Channel: Improve documentation	13 years ago
Amilcar Lucas	46552b4222	AP_Mount: Fix radians/degrees scaling regressions Rename calculate() into stabilize() Implement MAV_MOUNT_MODE_RC_TARGETING initialization Document to make sure this radians/degrees mess up does not happen again	13 years ago
Andrew Tridgell	d755fedc26	AnalogSource: prevent a division by zero on zero ADC data	13 years ago
Andrew Tridgell	f6d7d1bc59	APM: changed PID library to do automatic deltat calculation this fixes a problem with the HDNG2RLL PID, which was using the wrong time base and prevents similar bugs from happening in the future	13 years ago
Andrew Tridgell	f501503eb0	AP_Baro: improved barometer averaging this changes the barometer calculations to floating point. On a MS5611 this is actually about twice as fast as the previous 64 bit calculations, but gains us more accuracy as we are able to take advantage of sub-bit precision when we average over 8 samples.	13 years ago
Andrew Tridgell	520d762382	Filter: split the DerivativeFilter steps into update() and slope() this allows us to apply new data at a different rate than we calculate the slope.	13 years ago
Andrew Tridgell	3c7e521f70	AP_Baro: update MS5611 test to use baro library altitude	13 years ago
Andrew Tridgell	302696951a	AHRS: make the yaw independent drift correction optional and disable the new correction algorithm copes poorly with gyro drift, leading to signification attitude errors in the face of drift	13 years ago
Andrew Tridgell	8c5ef3e60f	AHRS: only enable barometer for AHRS if it is smooth enough if we used less than 5 samples to compute the pressure then don't use it for climb rate	13 years ago
Andrew Tridgell	ec0995eea1	SITL: lower baro noise a bit	13 years ago
Andrew Tridgell	6534dab719	Filter: fixed DerivativeFilter example build	13 years ago
Andrew Tridgell	d29b6ce0a8	SITL: run the HIL barometer at 80Hz to match APM2	13 years ago
Andrew Tridgell	209136386b	AP_Baro: added get_pressure_samples() interface this returns how many samples were used to calculate the last pressure	13 years ago

1 2 3 4 5 ...

1722 Commits (d46b7a67b7e68281beee4ec0661a67665015b2e7)