3e872c71fc
Copter: AC3.2.1-rc2 release notes
10 years ago
8e8ec09740
Copter: update pos_control alt_max from fence at 1hz
10 years ago
e0cfe091fb
Copter: setup uart after checking usb_connected
10 years ago
8ea65c2dc2
Copter: APM_Config define to disable FRSKY telem
10 years ago
f91fb9a4e8
Copter: rename frsky_telemetry_send function
10 years ago
34503de18e
Copter: integrate SerialManager
...
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
10 years ago
7ffcf62e2e
Copter: move MNT param's underscore to mount lib
10 years ago
c51ba8cd03
Copter: integrate mount frontend-backend restructure
...
initialise mount on startup
use Mount::has_pan_control method
Remove calls to unimplemented mount.configure_cmd
Remove call to update_mount_type which will be handled from within mount
lib
10 years ago
31b2534c1d
Copter: rename mount.set_roi_cmd to set_roi_target
10 years ago
18f8ffab6f
Copter: remove land detector bar climb rate definition
10 years ago
9d585700f8
Copter: remove baro climb rate check from land detector
10 years ago
a2d71d2811
Copter: Frsky telemtry change move parameter to init of the class
...
Parameter needs to be passed and use at the init of the class frsky telem
10 years ago
1819bd48f4
Copter: remove home_is_set checks from Loiter, PosHold, RTL
...
This allows these flight modes to potentially operate even when the
vehicle has never had a GPS lock.
Potentially we should replace this with a check that the EKF's origin
has been set
10 years ago
d49489ca7e
Copter: optflow_position_ok requires using EKF
10 years ago
01f1ce4cb3
Copter: position_ok false when EKF in const pos mode
10 years ago
74ac79ba10
Copter: Drift uses throttle_zero flag
10 years ago
02d0b05926
Copter: minor format fix
10 years ago
4185d17915
Copter: fix to RTL, PosHold and Loiter's use of filter status
10 years ago
cc52bbbffb
Copter: update current loc once home is set
10 years ago
f1a6b06586
Copter: remove redundant filter status checks
10 years ago
3641d3d508
Copter: send inav velocities in global position message
...
Also absolute alt now calculated from home alt + current alt above home
instead of using GPS absolute alt
10 years ago
e464909ddf
Copter: position_ok true when EKF predicts it will be ok
...
This resolves the chicken and egg problem of the EKF filter status's
position flags not becoming true until after the vehicle has been armed
at least once.
10 years ago
58ac9de94b
Copter: update home position when disarmed
...
This resolves the issue in which the vehicle's position jumped back to
it's home location when disarmed and using the EKF. This also makes
copter consistent with plane.
10 years ago
fd0b82f669
Copter: add optflow_position_ok and use for loiter
...
This allows entering Loiter flight mode with only optical flow based
position
10 years ago
199dc3454d
Copter: replace GPS_ok with position_ok
...
position_ok uses the EKF's filter status if the EKF is being used
otherwise it falls back to the GPS based checks used by inertial nav
10 years ago
a4f71e5946
Copter: replace inav's position_ok with get_filter_status
10 years ago
e94693e8ac
Copter: remove unused throttle integrator
10 years ago
b8822a42b6
Copter: Change Compass logging to new DataFlash method that handles instances.
10 years ago
37304fd5ed
Copter: Minor formatting changes in Log.pde
10 years ago
4b86a4aeec
Arducopter: Change mode logging to use common-vehicle DataFlash library.
10 years ago
422970a1b1
Arducopter: Change compass logging to use common-vehicle DataFlash library.
10 years ago
1b152cf2bf
ArduCopter: Change Current logging to use common-vehicle logging in DataFlash library.
10 years ago
c9d5b6aa7f
Arducopter: Change Attitude logging to use common-vehicle logging in DataFlash library.
10 years ago
0065b3b224
Copter: tighten accel and gyro pre-arm consistency check
...
Accel diff threshold to 0.7m/s/s (was 1.0 m/s/s)
Gyro diff threshold to 5deg/sec (was 20deg/sec)
10 years ago
4059e02a8c
Copter: move ch6 tuning to tuning.pde
10 years ago
fe74a11b4e
Copter: Drift mode gain changes and roll control through ch4
10 years ago
d6c48e422a
Copter: restore baro climb rate check to land_detector
10 years ago
1c25c00f5b
Copter: move land_detector to separate file
10 years ago
36410a5131
Copter: clean up land detector and modify to use desired velocity
10 years ago
0c44b5f4fe
Copter: fix typo in AC3.2.1 Release Notes
10 years ago
557f4df77e
Copter: use barometer.all_healthy() for health check in SYS_STATUS and arming
10 years ago
c151f24672
Copter: updates for new AP_Baro API
10 years ago
781f2b7ddc
Copter: update AC3.2.1-rc1 Release Notes
10 years ago
ce9b87c101
Copter: AC3.2.1-rc1 Release Notes
10 years ago
80f59694d0
Copter: remove deprecated Guided-Spline
...
Guided-Spline has been replaced by Guided-PosVel
10 years ago
be5bf91e92
Copter: add ekf velocity scaler to posvel controller
...
Also set auto-yaw-mode to yaw-hold only when posvel controller is
started instead of on every iteration.
added GUIDED_POSVEL_TIMEOUT_MS definition.
removed deprecated trigger_xy call.
Also use wp_nav.get_speed_xy in place of get_speed_param
10 years ago
474456e349
Copter: use guided_posvel for set_position_target messages
10 years ago
bc29008233
Copter: add guided_posvel
10 years ago
06d1a4c59f
Copter: use LandingGear command mode enum
10 years ago
d26fa6d827
Copter: minor format fix
...
no functional change
10 years ago
Randy Mackay
Robert Lefebvre
Jonathan Challinger
Matthias Badaire
Jason Short
Andrew Tridgell