| .. |
|
AC_AttitudeControl
|
AC_AttitudeControl: params always use set method
|
3 years ago |
|
AC_AutoTune
|
AC_AutoTune: params always use set method
|
3 years ago |
|
AC_Autorotation
|
AC_Autorotation: params always use set method
|
3 years ago |
|
AC_Avoidance
|
AC_Avoidance: params always use set method
|
3 years ago |
|
AC_Fence
|
AC_Fence: params always use set method
|
3 years ago |
|
AC_InputManager
|
AC_InputManager: params always use set method
|
3 years ago |
|
AC_PID
|
AC_PID: params always use set method
|
3 years ago |
|
AC_PrecLand
|
AC_PrecLand: params always use set method
|
3 years ago |
|
AC_Sprayer
|
AC_Sprayer: use vector.xy().length() instead of norm(x,y)
|
3 years ago |
|
AC_WPNav
|
AC_WPNav: params always use set method
|
3 years ago |
|
AC_ZR_APP
|
Rover:增加zr_app文件，执行1hz,10hz,50hz循环,
|
3 years ago |
|
APM_Control
|
APM_Control: params always use set method
|
3 years ago |
|
AP_ADC
|
AP_ADC: Console output can be disabled
|
3 years ago |
|
AP_ADSB
|
update .gitignore
|
3 years ago |
|
AP_AHRS
|
AP_AHRS: params always use set method
|
3 years ago |
|
AP_AIS
|
AP_AIS: include GCS_MAVLink.h
|
3 years ago |
|
AP_AccelCal
|
AP_AccelCal: limit COMMAND_ACKs accepted for vehicle pose confirmation
|
3 years ago |
|
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers
|
3 years ago |
|
AP_Airspeed
|
update .gitignore
|
3 years ago |
|
AP_Arming
|
AP_Arming: use prearm-display-timeout in milliseconds instead of counter
|
3 years ago |
|
AP_Avoidance
|
AP_Avoidance: params always use set method
|
3 years ago |
|
AP_BLHeli
|
AP_BLHeli: make ESC debug easier to see
|
3 years ago |
|
AP_Baro
|
AP_Baro: params always use set method
|
3 years ago |
|
AP_BattMonitor
|
AP_BattMonitor: params always use set method
|
3 years ago |
|
AP_Beacon
|
update .gitignore
|
3 years ago |
|
AP_BoardConfig
|
AP_BoardConfig: params always use set method
|
3 years ago |
|
AP_Button
|
AP_Button: pre-arm displays gpio vs servo_ch conflict
|
3 years ago |
|
AP_CANManager
|
AP_CANManager: added scripting2 protocol
|
3 years ago |
|
AP_Camera
|
AP_Camera: params always use set method
|
3 years ago |
|
AP_Common
|
AP_Common: add support for comparing BitMasks
|
3 years ago |
|
AP_Compass
|
AP_Compass: params always use set method
|
3 years ago |
|
AP_CustomRotations
|
AP_CustomRotations: fix param refrencing
|
3 years ago |
|
AP_DAL
|
AP_DAL: added set source events for EKF3
|
3 years ago |
|
AP_Declination
|
AP_Declination: ensure indexing into declination tables is always correct
|
3 years ago |
|
AP_Devo_Telem
|
AP_Devo_Telem: rename AP_AHRS::get_position to get_location
|
3 years ago |
|
AP_EFI
|
AP_EFI: prevent flood of Lutan serial port
|
3 years ago |
|
AP_ESC_Telem
|
AP_ESC_Telem: fixed race condition in update_rpm()
|
3 years ago |
|
AP_ExternalAHRS
|
AP_ExternalAHRS: correct compilation if AP_Baro_ExternalAHRS isn't available
|
3 years ago |
|
AP_FETtecOneWire
|
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
|
3 years ago |
|
AP_Filesystem
|
AP_Filesystem: change AC_FENCE to AP_FENCE_ENABLED
|
3 years ago |
|
AP_FlashIface
|
AP_FlashIface: make sure XIP flash is ready before returning
|
3 years ago |
|
AP_FlashStorage
|
AP_FlashStorage: support L496 MCUs
|
3 years ago |
|
AP_Follow
|
AP_Follow: vector params always use set method
|
3 years ago |
|
AP_Frsky_Telem
|
AP_Frsky_Telem: change AC_FENCE to AP_FENCE_ENABLED
|
3 years ago |
|
AP_GPS
|
AP_GPS: params always use set method
|
3 years ago |
|
AP_Generator
|
AP_Generator: add AP_GENERATOR_RICHENPOWER_ENABLED
|
3 years ago |
|
AP_Gripper
|
AP_Gripper: change UAVCAN to DroneCAN in param metadata
|
3 years ago |
|
AP_GyroFFT
|
AP_GyroFFT: params always use set method
|
3 years ago |
|
AP_HAL
|
AP_HAL: move from HAL_NO_SHARED_DMA to AP_HAL_SHARED_DMA_ENABLED
|
3 years ago |
|
AP_HAL_ChibiOS
|
update .gitignore
|
3 years ago |
|
AP_HAL_ESP32
|
AP_HAL_ESP32: more changes for 32 bit servo mask
|
3 years ago |
|
AP_HAL_Empty
|
AP_HAL_Empty: move implementations of functions to header
|
3 years ago |
|
AP_HAL_Linux
|
AP_HAL_Linux: more changes for 32 bit servo mask
|
3 years ago |
|
AP_HAL_SITL
|
AP_HAL_SITL: add support for starting node in maintenance mode
|
3 years ago |
|
AP_Hott_Telem
|
AP_Hott_Telem: Console output can be disabled
|
3 years ago |
|
AP_ICEngine
|
AP_ICEngine: add and use AP_ICENGINE_ENABLE
|
3 years ago |
|
AP_IOMCU
|
AP_IOMCU: Console output can be disabled
|
3 years ago |
|
AP_IRLock
|
AP_IRLock: correct spelling mili -> milli
|
3 years ago |
|
AP_InertialNav
|
AP_InertialNav: nfc, fix to say relative to EKF origin
|
3 years ago |
|
AP_InertialSensor
|
AP_InertialSensor: vector params always use set method
|
3 years ago |
|
AP_InternalError
|
AP_InternalError: change panic to return error code as string in SITL
|
3 years ago |
|
AP_JSButton
|
…
|
|
|
AP_KDECAN
|
AP_KDECAN: more changes for 32 bit servo mask
|
3 years ago |
|
AP_L1_Control
|
AP_L1_Control: use AP_GROUPINFO instead of AP_GROUPINFO_FRAME
|
3 years ago |
|
AP_LTM_Telem
|
AP_LTM_Telem: add AP_LTM_TELEM_ENABLED
|
3 years ago |
|
AP_Landing
|
AP_Landing: change logging to be designated as streaming
|
3 years ago |
|
AP_LandingGear
|
AP_LandingGear: SITL: only set defualts is SITL pin is set avoiding enable via param conversion
|
3 years ago |
|
AP_LeakDetector
|
AP_LeakDetector: check for valid analog pin
|
3 years ago |
|
AP_Logger
|
AP_Logger: params always use set method
|
3 years ago |
|
AP_MSP
|
AP_MSP: fix line ending
|
3 years ago |
|
AP_Math
|
AP_Math: tests: params always use set method
|
3 years ago |
|
AP_Menu
|
…
|
|
|
AP_Mission
|
AP_Mission: skip aux function in determining if a takeoff
|
3 years ago |
|
AP_Module
|
AP_Module: tidy includes
|
3 years ago |
|
AP_Motors
|
AP_Motors: params always use set method
|
3 years ago |
|
AP_Mount
|
AP_Mount: params always use set method
|
3 years ago |
|
AP_NMEA_Output
|
AP_NMEA_Output: use a fixed maximum number of NMEA outputs
|
3 years ago |
|
AP_NavEKF
|
update .gitignore
|
3 years ago |
|
AP_NavEKF2
|
AP_NavEKF2: fixed undefined behaviour in logging
|
3 years ago |
|
AP_NavEKF3
|
AP_NavEKF3: add EK3_GPS_VACC_MAX as a threshold that decides whether to use GPS as altitude source depending on vAcc
|
3 years ago |
|
AP_Navigation
|
…
|
|
|
AP_Notify
|
增加UAVCAN RGB LED
|
3 years ago |
|
AP_OLC
|
AP_OLC: tidy includes
|
3 years ago |
|
AP_ONVIF
|
AP_ONVIF: fix executable permission and trailing whitespace
|
3 years ago |
|
AP_OSD
|
update .gitignore
|
3 years ago |
|
AP_OpticalFlow
|
AP_OpticalFlow: params always use set method
|
3 years ago |
|
AP_Parachute
|
AP_Parachute: params always use set method
|
3 years ago |
|
AP_Param
|
AP_Param: remove AP_ParamV `=` operator
|
3 years ago |
|
AP_PiccoloCAN
|
AP_PiccoloCAN: params always use set method
|
3 years ago |
|
AP_Proximity
|
增加proximity uavcan
|
3 years ago |
|
AP_RAMTRON
|
AP_RAMTRON: reduce scope for WITH_SEMAPHORE
|
3 years ago |
|
AP_RCMapper
|
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
|
3 years ago |
|
AP_RCProtocol
|
AP_RCProtocol: reset UART on RX failure for CRSF
|
3 years ago |
|
AP_RCTelemetry
|
AP_RCTelemetry: don't spam mode changes on CRSF startup
|
3 years ago |
|
AP_ROMFS
|
AP_ROMFS: tidy includes
|
3 years ago |
|
AP_RPM
|
AP_RPM: fixed use of configured() vs configured_in_storage()
|
3 years ago |
|
AP_RSSI
|
AP_RSSI: convert floating point divides into multiplys
|
3 years ago |
|
AP_RTC
|
AP_RTC: fix oldest_acceptable_date to be in micros
|
3 years ago |
|
AP_Radio
|
AP_Radio: Console output can be disabled
|
3 years ago |
|
AP_Rally
|
AP_Rally: tidy creation of Location from RallyLocation
|
3 years ago |
|
AP_RangeFinder
|
AP_RangeFinder_NMEA: 增加声呐解析，,SIP
|
3 years ago |
|
AP_Relay
|
AP_Relay:Prevent operation for sim-on-hardware,add logs
|
3 years ago |
|
AP_RobotisServo
|
AP_RobotisServo: disable with minmimize features and 1mb flash
|
3 years ago |
|
AP_SBusOut
|
…
|
|
|
AP_Scheduler
|
AP_Scheduler: params always use set method
|
3 years ago |
|
AP_Scripting
|
update .gitignore
|
3 years ago |
|
AP_SerialLED
|
AP_SerialLED: enable 32 servo outs
|
3 years ago |
|
AP_SerialManager
|
AP_SerialManager:correct find_baudrate() function
|
3 years ago |
|
AP_ServoRelayEvents
|
…
|
|
|
AP_SmartRTL
|
AP_SmartRTL: params always use set method
|
3 years ago |
|
AP_Soaring
|
AP_Soaring: make function const
|
3 years ago |
|
AP_Stats
|
…
|
|
|
AP_TECS
|
TECS.cpp: Remove redundant throttle saturation
|
3 years ago |
|
AP_TempCalibration
|
…
|
|
|
AP_TemperatureSensor
|
…
|
|
|
AP_Terrain
|
AP_Terrain: params always use set method
|
3 years ago |
|
AP_Torqeedo
|
AP_Torqeedo : correct comment spelling
|
3 years ago |
|
AP_Tuning
|
AP_Tuning: tidy includes
|
3 years ago |
|
AP_UAVCAN
|
增加proximity uavcan
|
3 years ago |
|
AP_Vehicle
|
AP_Vehicle: change AC_FENCE to AP_FENCE_ENABLED
|
3 years ago |
|
AP_VideoTX
|
AP_VideoTX: params always use set method
|
3 years ago |
|
AP_VisualOdom
|
AP_VisualOdom: only include log structure if enabled
|
3 years ago |
|
AP_Volz_Protocol
|
AP_Volz: disable with minmimize features
|
3 years ago |
|
AP_WheelEncoder
|
AP_WheelEncoder: fix WheelEncoder_Quadrature timestamp.
|
3 years ago |
|
AP_Winch
|
AP_Winch: stop libraries including AP_Logger.h in .h files
|
3 years ago |
|
AP_WindVane
|
AP_WindVane: params always use set method
|
3 years ago |
|
AR_Motors
|
AR_Motors: params always use set method
|
3 years ago |
|
AR_WPNav
|
AR_WPNav: stop libraries including AP_Logger.h in .h files
|
3 years ago |
|
Filter
|
Filter: params always use set method
|
3 years ago |
|
GCS_MAVLink
|
Rover:增加zr_app文件，执行1hz,10hz,50hz循环,
|
3 years ago |
|
PID
|
PID: params always use set method
|
3 years ago |
|
RC_Channel
|
RC_Channel: add AUX switch to pause logging of streamed entries
|
3 years ago |
|
SITL
|
update .gitignore
|
3 years ago |
|
SRV_Channel
|
SRV_Channel: use set_and_default method
|
3 years ago |
|
StorageManager
|
StorageManager: fix write_block() comment
|
3 years ago |
|
doc
|
…
|
|
Brown.Z
a2fb61e5e4