You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
35 lines
1.4 KiB
35 lines
1.4 KiB
help: |
|
@echo "" |
|
@echo " ArduPilot Building" |
|
@echo " ==================" |
|
@echo "" |
|
@echo " The following web page has detailed information on building the code" |
|
@echo " http://dev.ardupilot.com/wiki/building-the-code/" |
|
@echo "" |
|
@echo " Before building a target you need to be in the target vehicle type directory" |
|
@echo " e.g. ArduPlane, ArduCopter, APMrover2, AntennaTracker" |
|
@echo "" |
|
@echo " Most targets support a \"-upload\" extension to upload the firmware" |
|
@echo " to a connected board. e.g. \"make px4-v2-upload\"" |
|
@echo "" |
|
@echo " Some targets support a \"-debug\" extension to enable a debug build" |
|
@echo " (with debug symbols, and without optimisation)" |
|
@echo "" |
|
@echo " Note that the px4 builds are NOT parallel safe, NO -j flag" |
|
@echo "" |
|
@echo " Targets" |
|
@echo " -------" |
|
@echo "" |
|
@echo " apm1 - the APM1 board" |
|
@echo " apm2 - the APM2 board" |
|
@echo " px4-v1 - the PX4v1 board" |
|
@echo " px4-v2 - the Pixhawk" |
|
@echo " pxf - the Beagle Bone Black (BBB) + PXF cape combination" |
|
@echo " navio - the RaspberryPi + NavIO cape combination" |
|
@echo " linux - a generic Linux build" |
|
@echo " flymaple - the FlyMaple board" |
|
@echo " vrbrain - the VRBrain boards" |
|
@echo " sitl - the SITL Software In The Loop simulation" |
|
@echo " bbbmini - the Beagle Bone Black mini" |
|
@echo " bebop - the Parrot Bebop" |
|
@echo " raspilot - the RaspberryPi + pilot cape combination"
|
|
|