zrzk
/
ardupilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
704 Commits
23 Branches
0 Tags
282 MiB
 
 
 
 
 
 
Tree: 0ea1845f38
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '0ea1845f38'
${ noResults }
ardupilot/ArduCopterMega/setup.pde

1007 lines
22 KiB
Raw Blame History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*-
// Functions called from the setup menu
static int8_t setup_radio (uint8_t argc, const Menu::arg *argv);
static int8_t setup_motors (uint8_t argc, const Menu::arg *argv);
static int8_t setup_accel (uint8_t argc, const Menu::arg *argv);
static int8_t setup_factory (uint8_t argc, const Menu::arg *argv);
static int8_t setup_erase (uint8_t argc, const Menu::arg *argv);
static int8_t setup_flightmodes (uint8_t argc, const Menu::arg *argv);
static int8_t setup_pid (uint8_t argc, const Menu::arg *argv);
static int8_t setup_frame (uint8_t argc, const Menu::arg *argv);
static int8_t setup_current (uint8_t argc, const Menu::arg *argv);
static int8_t setup_compass (uint8_t argc, const Menu::arg *argv);
static int8_t setup_mag_offset (uint8_t argc, const Menu::arg *argv);
static int8_t setup_declination (uint8_t argc, const Menu::arg *argv);
static int8_t setup_show (uint8_t argc, const Menu::arg *argv);
// Command/function table for the setup menu
const struct Menu::command setup_menu_commands[] PROGMEM = {
// command function called
// ======= ===============
{"erase", setup_erase},
{"reset", setup_factory},
{"pid", setup_pid},
{"radio", setup_radio},
{"motors", setup_motors},
{"level", setup_accel},
{"modes", setup_flightmodes},
{"frame", setup_frame},
{"current", setup_current},
{"compass", setup_compass},
{"mag_offset", setup_mag_offset},
{"declination", setup_declination},
{"show", setup_show}
};
// Create the setup menu object.
MENU(setup_menu, "setup", setup_menu_commands);
// Called from the top-level menu to run the setup menu.
int8_t
setup_mode(uint8_t argc, const Menu::arg *argv)
{
// Give the user some guidance
Serial.printf_P(PSTR("Setup Mode\n"
"\n"
"IMPORTANT: if you have not previously set this system up, use the\n"
"'reset' command to initialize the EEPROM to sensible default values\n"
"and then the 'radio' command to configure for your radio.\n"
"\n"));
// Run the setup menu. When the menu exits, we will return to the main menu.
setup_menu.run();
}
// Print the current configuration.
// Called by the setup menu 'show' command.
static int8_t
setup_show(uint8_t argc, const Menu::arg *argv)
{
uint8_t i;
// clear the area
print_blanks(8);
report_radio();
report_frame();
report_current();
report_gains();
report_xtrack();
report_throttle();
report_flight_modes();
report_imu();
report_compass();
return(0);
}
// Initialise the EEPROM to 'factory' settings (mostly defined in APM_Config.h or via defaults).
// Called by the setup menu 'factoryreset' command.
static int8_t
setup_factory(uint8_t argc, const Menu::arg *argv)
{
uint8_t i;
int c;
Serial.printf_P(PSTR("\nType 'Y' and hit Enter to perform factory reset, any other key to abort:\n"));
do {
c = Serial.read();
} while (-1 == c);
if (('y' != c) && ('Y' != c))
return(-1);
//zero_eeprom();
default_gains();
// setup default values
default_waypoint_info();
default_nav();
default_alt_hold();
default_frame();
default_flight_modes();
default_throttle();
default_logs();
default_current();
print_done();
// finish
// ------
return(0);
}
// Perform radio setup.
// Called by the setup menu 'radio' command.
static int8_t
setup_radio(uint8_t argc, const Menu::arg *argv)
{
Serial.println("\n\nRadio Setup:");
uint8_t i;
for(i = 0; i < 100;i++){
delay(20);
read_radio();
}
if(rc_1.radio_in < 500){
while(1){
Serial.printf_P(PSTR("\nNo radio; Check connectors."));
delay(1000);
// stop here
}
}
rc_1.radio_min = rc_1.radio_in;
rc_2.radio_min = rc_2.radio_in;
rc_3.radio_min = rc_3.radio_in;
rc_4.radio_min = rc_4.radio_in;
rc_5.radio_min = rc_5.radio_in;
rc_6.radio_min = rc_6.radio_in;
rc_7.radio_min = rc_7.radio_in;
rc_8.radio_min = rc_8.radio_in;
rc_1.radio_max = rc_1.radio_in;
rc_2.radio_max = rc_2.radio_in;
rc_3.radio_max = rc_3.radio_in;
rc_4.radio_max = rc_4.radio_in;
rc_5.radio_max = rc_5.radio_in;
rc_6.radio_max = rc_6.radio_in;
rc_7.radio_max = rc_7.radio_in;
rc_8.radio_max = rc_8.radio_in;
rc_1.radio_trim = rc_1.radio_in;
rc_2.radio_trim = rc_2.radio_in;
rc_4.radio_trim = rc_4.radio_in;
// 3 is not trimed
rc_5.radio_trim = 1500;
rc_6.radio_trim = 1500;
rc_7.radio_trim = 1500;
rc_8.radio_trim = 1500;
Serial.printf_P(PSTR("\nMove all controls to each extreme. Hit Enter to save: "));
while(1){
delay(20);
// Filters radio input - adjust filters in the radio.pde file
// ----------------------------------------------------------
read_radio();
rc_1.update_min_max();
rc_2.update_min_max();
rc_3.update_min_max();
rc_4.update_min_max();
rc_5.update_min_max();
rc_6.update_min_max();
rc_7.update_min_max();
rc_8.update_min_max();
if(Serial.available() > 0){
//rc_3.radio_max += 250;
Serial.flush();
save_EEPROM_radio();
//delay(100);
// double checking
//read_EEPROM_radio();
//print_radio_values();
print_done();
break;
}
}
report_radio();
return(0);
}
static int8_t
setup_motors(uint8_t argc, const Menu::arg *argv)
{
report_frame();
init_rc_in();
// read the radio to set trims
// ---------------------------
trim_radio();
print_hit_enter();
delay(1000);
int out_min = rc_3.radio_min + 70;
while(1){
delay(20);
read_radio();
motor_out[CH_1] = rc_3.radio_min;
motor_out[CH_2] = rc_3.radio_min;
motor_out[CH_3] = rc_3.radio_min;
motor_out[CH_4] = rc_3.radio_min;
if(frame_type == PLUS_FRAME){
if(rc_1.control_in > 0){
motor_out[CH_1] = out_min;
Serial.println("0");
}else if(rc_1.control_in < 0){
motor_out[CH_2] = out_min;
Serial.println("1");
}
if(rc_2.control_in > 0){
motor_out[CH_4] = out_min;
Serial.println("3");
}else if(rc_2.control_in < 0){
motor_out[CH_3] = out_min;
Serial.println("2");
}
}else if(frame_type == X_FRAME){
// lower right
if((rc_1.control_in > 0) && (rc_2.control_in > 0)){
motor_out[CH_4] = out_min;
Serial.println("3");
// lower left
}else if((rc_1.control_in < 0) && (rc_2.control_in > 0)){
motor_out[CH_2] = out_min;
Serial.println("1");
// upper left
}else if((rc_1.control_in < 0) && (rc_2.control_in < 0)){
motor_out[CH_3] = out_min;
Serial.println("2");
// upper right
}else if((rc_1.control_in > 0) && (rc_2.control_in < 0)){
motor_out[CH_1] = out_min;
Serial.println("0");
}
}else if(frame_type == TRI_FRAME){
if(rc_1.control_in > 0){
motor_out[CH_1] = out_min;
}else if(rc_1.control_in < 0){
motor_out[CH_2] = out_min;
}
if(rc_2.control_in > 0){
motor_out[CH_4] = out_min;
}
if(rc_4.control_in > 0){
rc_4.servo_out = 2000;
}else if(rc_4.control_in < 0){
rc_4.servo_out = -2000;
}
rc_4.calc_pwm();
motor_out[CH_3] = rc_4.radio_out;
}
if(rc_3.control_in > 0){
APM_RC.OutputCh(CH_1, rc_3.radio_in);
APM_RC.OutputCh(CH_2, rc_3.radio_in);
APM_RC.OutputCh(CH_3, rc_3.radio_in);
if(frame_type != TRI_FRAME)
APM_RC.OutputCh(CH_4, rc_3.radio_in);
}else{
APM_RC.OutputCh(CH_1, motor_out[CH_1]);
APM_RC.OutputCh(CH_2, motor_out[CH_2]);
APM_RC.OutputCh(CH_3, motor_out[CH_3]);
APM_RC.OutputCh(CH_4, motor_out[CH_4]);
}
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
setup_accel(uint8_t argc, const Menu::arg *argv)
{
Serial.printf_P(PSTR("\nHold ArduCopter completely still and level.\n"));
imu.init_accel();
imu.print_accel_offsets();
report_imu();
return(0);
}
static int8_t
setup_pid(uint8_t argc, const Menu::arg *argv)
{
if (!strcmp_P(argv[1].str, PSTR("default"))) {
default_gains();
}else if (!strcmp_P(argv[1].str, PSTR("s_kp"))) {
pid_stabilize_roll.kP(argv[2].f);
pid_stabilize_pitch.kP(argv[2].f);
save_EEPROM_PID();
}else if (!strcmp_P(argv[1].str, PSTR("s_kd"))) {
stabilize_dampener = argv[2].f;
save_EEPROM_PID();
}else if (!strcmp_P(argv[1].str, PSTR("y_kp"))) {
pid_yaw.kP(argv[2].f);
save_EEPROM_PID();
}else if (!strcmp_P(argv[1].str, PSTR("s_kd"))) {
pid_yaw.kD(argv[2].f);
save_EEPROM_PID();
}else if (!strcmp_P(argv[1].str, PSTR("t_kp"))) {
pid_baro_throttle.kP(argv[2].f);
save_EEPROM_PID();
}else if (!strcmp_P(argv[1].str, PSTR("t_kd"))) {
pid_baro_throttle.kD(argv[2].f);
save_EEPROM_PID();
}else{
default_gains();
}
report_gains();
}
static int8_t
setup_flightmodes(uint8_t argc, const Menu::arg *argv)
{
byte switchPosition, oldSwitchPosition, mode;
Serial.printf_P(PSTR("\nMove RC toggle switch to each position to edit, move aileron stick to select modes."));
print_hit_enter();
trim_radio();
while(1){
delay(20);
read_radio();
switchPosition = readSwitch();
// look for control switch change
if (oldSwitchPosition != switchPosition){
mode = flight_modes[switchPosition];
mode = constrain(mode, 0, NUM_MODES-1);
// update the user
print_switch(switchPosition, mode);
// Remember switch position
oldSwitchPosition = switchPosition;
}
// look for stick input
if (radio_input_switch() == true){
mode++;
if(mode >= NUM_MODES)
mode = 0;
// save new mode
flight_modes[switchPosition] = mode;
// print new mode
print_switch(switchPosition, mode);
}
// escape hatch
if(Serial.available() > 0){
save_EEPROM_flight_modes();
print_done();
report_flight_modes();
return (0);
}
}
}
static int8_t
setup_declination(uint8_t argc, const Menu::arg *argv)
{
mag_declination = argv[1].f;
save_EEPROM_mag_declination();
report_compass();
}
static int8_t
setup_erase(uint8_t argc, const Menu::arg *argv)
{
zero_eeprom();
return 0;
}
static int8_t
setup_compass(uint8_t argc, const Menu::arg *argv)
{
if (!strcmp_P(argv[1].str, PSTR("on"))) {
compass_enabled = true;
init_compass();
} else if (!strcmp_P(argv[1].str, PSTR("off"))) {
compass_enabled = false;
} else {
Serial.printf_P(PSTR("\nOptions:[on,off]\n"));
report_compass();
return 0;
}
save_EEPROM_mag();
report_compass();
return 0;
}
static int8_t
setup_frame(uint8_t argc, const Menu::arg *argv)
{
if (!strcmp_P(argv[1].str, PSTR("+"))) {
frame_type = PLUS_FRAME;
} else if (!strcmp_P(argv[1].str, PSTR("x"))) {
frame_type = X_FRAME;
} else if (!strcmp_P(argv[1].str, PSTR("tri"))) {
frame_type = TRI_FRAME;
} else if (!strcmp_P(argv[1].str, PSTR("hexa"))) {
frame_type = HEXA_FRAME;
} else {
Serial.printf_P(PSTR("\nOptions:[+, x, tri, hexa]\n"));
report_frame();
return 0;
}
save_EEPROM_frame();
report_frame();
return 0;
}
static int8_t
setup_current(uint8_t argc, const Menu::arg *argv)
{
if (!strcmp_P(argv[1].str, PSTR("on"))) {
current_enabled = true;
save_EEPROM_mag();
} else if (!strcmp_P(argv[1].str, PSTR("off"))) {
current_enabled = false;
save_EEPROM_mag();
} else if(argv[1].i > 10){
milliamp_hours = argv[1].i;
} else {
Serial.printf_P(PSTR("\nOptions:[on, off, mAh]\n"));
report_current();
return 0;
}
save_EEPROM_current();
report_current();
return 0;
}
static int8_t
setup_mag_offset(uint8_t argc, const Menu::arg *argv)
{
Serial.printf_P(PSTR("\nRotate/Pitch/Roll your ArduCopter until the offset variables stop changing.\n"));
print_hit_enter();
Serial.printf_P(PSTR("Starting in 3 secs.\n"));
delay(3000);
compass.init(); // Initialization
compass.set_orientation(MAGORIENTATION); // set compass's orientation on aircraft
compass.set_offsets(0, 0, 0); // set offsets to account for surrounding interference
compass.set_declination(ToRad(DECLINATION)); // set local difference between magnetic north and true north
//int counter = 0;
float _min[3], _max[3], _offset[3];
while(1){
static float min[3], _max[3], offset[3];
if (millis() - fast_loopTimer > 100) {
delta_ms_fast_loop = millis() - fast_loopTimer;
fast_loopTimer = millis();
G_Dt = (float)delta_ms_fast_loop / 1000.f;
compass.read();
compass.calculate(0, 0); // roll = 0, pitch = 0 for this example
// capture min
if(compass.mag_x < _min[0]) _min[0] = compass.mag_x;
if(compass.mag_y < _min[1]) _min[1] = compass.mag_y;
if(compass.mag_z < _min[2]) _min[2] = compass.mag_z;
// capture max
if(compass.mag_x > _max[0]) _max[0] = compass.mag_x;
if(compass.mag_y > _max[1]) _max[1] = compass.mag_y;
if(compass.mag_z > _max[2]) _max[2] = compass.mag_z;
// calculate offsets
offset[0] = -(_max[0] + _min[0]) / 2;
offset[1] = -(_max[1] + _min[1]) / 2;
offset[2] = -(_max[2] + _min[2]) / 2;
// display all to user
Serial.printf_P(PSTR("Heading: "));
Serial.print(ToDeg(compass.heading));
Serial.print(" \t(");
Serial.print(compass.mag_x);
Serial.print(",");
Serial.print(compass.mag_y);
Serial.print(",");
Serial.print(compass.mag_z);
Serial.print(")\t offsets(");
Serial.print(offset[0]);
Serial.print(",");
Serial.print(offset[1]);
Serial.print(",");
Serial.print(offset[2]);
Serial.println(")");
if(Serial.available() > 0){
mag_offset_x = offset[0];
mag_offset_y = offset[1];
mag_offset_z = offset[2];
save_EEPROM_mag_offset();
// set offsets to account for surrounding interference
compass.set_offsets(mag_offset_x, mag_offset_y, mag_offset_z);
report_compass();
break;
}
}
}
}
/***************************************************************************/
// CLI utilities
/***************************************************************************/
void default_waypoint_info()
{
wp_radius = 4; //TODO: Replace this quick fix with a real way to define wp_radius
loiter_radius = 30; //TODO: Replace this quick fix with a real way to define loiter_radius
save_EEPROM_waypoint_info();
}
void
default_nav()
{
// nav control
x_track_gain = XTRACK_GAIN * 100;
x_track_angle = XTRACK_ENTRY_ANGLE * 100;
pitch_max = PITCH_MAX * 100;
save_EEPROM_nav();
}
void
default_alt_hold()
{
alt_to_hold = -1;
save_EEPROM_alt_RTL();
}
void
default_frame()
{
frame_type = PLUS_FRAME;
save_EEPROM_frame();
}
void
default_current()
{
milliamp_hours = 2000;
current_enabled = false;
save_EEPROM_current();
}
void
default_flight_modes()
{
flight_modes[0] = FLIGHT_MODE_1;
flight_modes[1] = FLIGHT_MODE_2;
flight_modes[2] = FLIGHT_MODE_3;
flight_modes[3] = FLIGHT_MODE_4;
flight_modes[4] = FLIGHT_MODE_5;
flight_modes[5] = FLIGHT_MODE_6;
save_EEPROM_flight_modes();
}
void
default_throttle()
{
throttle_min = THROTTLE_MIN;
throttle_max = THROTTLE_MAX;
throttle_cruise = THROTTLE_CRUISE;
throttle_failsafe_enabled = THROTTLE_FAILSAFE;
throttle_failsafe_action = THROTTLE_FAILSAFE_ACTION;
throttle_failsafe_value = THROTTLE_FS_VALUE;
save_EEPROM_throttle();
}
void default_logs()
{
// convenience macro for testing LOG_* and setting LOGBIT_*
#define LOGBIT(_s) (LOG_ ## _s ? LOGBIT_ ## _s : 0)
log_bitmask =
LOGBIT(ATTITUDE_FAST) |
LOGBIT(ATTITUDE_MED) |
LOGBIT(GPS) |
LOGBIT(PM) |
LOGBIT(CTUN) |
LOGBIT(NTUN) |
LOGBIT(MODE) |
LOGBIT(RAW) |
LOGBIT(CMD) |
LOGBIT(CURRENT);
#undef LOGBIT
save_EEPROM_logs();
}
void
default_gains()
{
// acro, angular rate
pid_acro_rate_roll.kP(ACRO_RATE_ROLL_P);
pid_acro_rate_roll.kI(ACRO_RATE_ROLL_I);
pid_acro_rate_roll.kD(0);
pid_acro_rate_roll.imax(ACRO_RATE_ROLL_IMAX * 100);
pid_acro_rate_pitch.kP(ACRO_RATE_PITCH_P);
pid_acro_rate_pitch.kI(ACRO_RATE_PITCH_I);
pid_acro_rate_pitch.kD(0);
pid_acro_rate_pitch.imax(ACRO_RATE_PITCH_IMAX * 100);
pid_acro_rate_yaw.kP(ACRO_RATE_YAW_P);
pid_acro_rate_yaw.kI(ACRO_RATE_YAW_I);
pid_acro_rate_yaw.kD(0);
pid_acro_rate_yaw.imax(ACRO_RATE_YAW_IMAX * 100);
// stabilize, angle error
pid_stabilize_roll.kP(STABILIZE_ROLL_P);
pid_stabilize_roll.kI(STABILIZE_ROLL_I);
pid_stabilize_roll.kD(0);
pid_stabilize_roll.imax(STABILIZE_ROLL_IMAX * 100);
pid_stabilize_pitch.kP(STABILIZE_PITCH_P);
pid_stabilize_pitch.kI(STABILIZE_PITCH_I);
pid_stabilize_pitch.kD(0);
pid_stabilize_pitch.imax(STABILIZE_PITCH_IMAX * 100);
// YAW hold
pid_yaw.kP(YAW_P);
pid_yaw.kI(YAW_I);
pid_yaw.kD(0);
pid_yaw.imax(YAW_IMAX * 100);
// custom dampeners
// roll pitch
stabilize_dampener = STABILIZE_DAMPENER;
//yaw
hold_yaw_dampener = HOLD_YAW_DAMPENER;
// navigation
pid_nav_lat.kP(NAV_P);
pid_nav_lat.kI(NAV_I);
pid_nav_lat.kD(NAV_D);
pid_nav_lat.imax(NAV_IMAX);
pid_nav_lon.kP(NAV_P);
pid_nav_lon.kI(NAV_I);
pid_nav_lon.kD(NAV_D);
pid_nav_lon.imax(NAV_IMAX);
pid_baro_throttle.kP(THROTTLE_BARO_P);
pid_baro_throttle.kI(THROTTLE_BARO_I);
pid_baro_throttle.kD(THROTTLE_BARO_D);
pid_baro_throttle.imax(THROTTLE_BARO_IMAX);
pid_sonar_throttle.kP(THROTTLE_SONAR_P);
pid_sonar_throttle.kI(THROTTLE_SONAR_I);
pid_sonar_throttle.kD(THROTTLE_SONAR_D);
pid_sonar_throttle.imax(THROTTLE_SONAR_IMAX);
save_EEPROM_PID();
}
/***************************************************************************/
// CLI utilities
/***************************************************************************/
void report_current()
{
print_blanks(2);
read_EEPROM_current();
Serial.printf_P(PSTR("Current Sensor\n"));
print_divider();
print_enabled(current_enabled);
Serial.printf_P(PSTR("mah: %d"),milliamp_hours);
print_blanks(1);
}
void report_frame()
{
print_blanks(2);
read_EEPROM_frame();
Serial.printf_P(PSTR("Frame\n"));
print_divider();
if(frame_type == X_FRAME)
Serial.printf_P(PSTR("X "));
else if(frame_type == PLUS_FRAME)
Serial.printf_P(PSTR("Plus "));
else if(frame_type == TRI_FRAME)
Serial.printf_P(PSTR("TRI "));
else if(frame_type == HEXA_FRAME)
Serial.printf_P(PSTR("HEXA "));
Serial.printf_P(PSTR("frame (%d)"), (int)frame_type);
print_blanks(1);
}
void report_radio()
{
print_blanks(2);
Serial.printf_P(PSTR("Radio\n"));
print_divider();
// radio
read_EEPROM_radio();
print_radio_values();
print_blanks(1);
}
void report_gains()
{
print_blanks(2);
Serial.printf_P(PSTR("Gains\n"));
print_divider();
read_EEPROM_PID();
// Acro
Serial.printf_P(PSTR("Acro:\nroll:\n"));
print_PID(&pid_acro_rate_roll);
Serial.printf_P(PSTR("pitch:\n"));
print_PID(&pid_acro_rate_pitch);
Serial.printf_P(PSTR("yaw:\n"));
print_PID(&pid_acro_rate_yaw);
// Stabilize
Serial.printf_P(PSTR("\nStabilize:\nroll:\n"));
print_PID(&pid_stabilize_roll);
Serial.printf_P(PSTR("pitch:\n"));
print_PID(&pid_stabilize_pitch);
Serial.printf_P(PSTR("yaw:\n"));
print_PID(&pid_yaw);
Serial.printf_P(PSTR("Stabilize dampener: %4.3f\n"), stabilize_dampener);
Serial.printf_P(PSTR("Yaw Dampener: %4.3f\n\n"), hold_yaw_dampener);
// Nav
Serial.printf_P(PSTR("Nav:\nlat:\n"));
print_PID(&pid_nav_lat);
Serial.printf_P(PSTR("long:\n"));
print_PID(&pid_nav_lon);
Serial.printf_P(PSTR("baro throttle:\n"));
print_PID(&pid_baro_throttle);
Serial.printf_P(PSTR("sonar throttle:\n"));
print_PID(&pid_sonar_throttle);
print_blanks(1);
}
void report_xtrack()
{
print_blanks(2);
Serial.printf_P(PSTR("Crosstrack\n"));
print_divider();
// radio
read_EEPROM_nav();
Serial.printf_P(PSTR("XTRACK: %4.2f\n"
"XTRACK angle: %d\n"
"PITCH_MAX: %ld"),
x_track_gain,
x_track_angle,
pitch_max);
print_blanks(1);
}
void report_throttle()
{
print_blanks(2);
Serial.printf_P(PSTR("Throttle\n"));
print_divider();
read_EEPROM_throttle();
Serial.printf_P(PSTR("min: %d\n"
"max: %d\n"
"cruise: %d\n"
"failsafe_enabled: %d\n"
"failsafe_value: %d"),
throttle_min,
throttle_max,
throttle_cruise,
throttle_failsafe_enabled,
throttle_failsafe_value);
print_blanks(1);
}
void report_imu()
{
print_blanks(2);
Serial.printf_P(PSTR("IMU\n"));
print_divider();
imu.print_gyro_offsets();
imu.print_accel_offsets();
print_blanks(1);
}
void report_compass()
{
print_blanks(2);
Serial.printf_P(PSTR("Compass\n"));
print_divider();
read_EEPROM_compass();
read_EEPROM_compass_declination();
read_EEPROM_compass_offset();
print_enabled(compass_enabled);
// mag declination
Serial.printf_P(PSTR("Mag Delination: %4.4f\n"),
mag_declination);
// mag offsets
Serial.printf_P(PSTR("Mag offsets: %4.4f, %4.4f, %4.4f"),
mag_offset_x,
mag_offset_y,
mag_offset_z);
print_blanks(1);
}
void report_flight_modes()
{
print_blanks(2);
Serial.printf_P(PSTR("Flight modes\n"));
print_divider();
read_EEPROM_flight_modes();
for(int i = 0; i < 6; i++ ){
print_switch(i, flight_modes[i]);
}
print_blanks(1);
}
/***************************************************************************/
// CLI utilities
/***************************************************************************/
void
print_PID(PID * pid)
{
Serial.printf_P(PSTR("P: %4.3f, I:%4.3f, D:%4.3f, IMAX:%ld\n"), pid->kP(), pid->kI(), pid->kD(), (long)pid->imax());
}
void
print_radio_values()
{
Serial.printf_P(PSTR("CH1: %d | %d\n"), rc_1.radio_min, rc_1.radio_max);
Serial.printf_P(PSTR("CH2: %d | %d\n"), rc_2.radio_min, rc_2.radio_max);
Serial.printf_P(PSTR("CH3: %d | %d\n"), rc_3.radio_min, rc_3.radio_max);
Serial.printf_P(PSTR("CH4: %d | %d\n"), rc_4.radio_min, rc_4.radio_max);
Serial.printf_P(PSTR("CH5: %d | %d\n"), rc_5.radio_min, rc_5.radio_max);
Serial.printf_P(PSTR("CH6: %d | %d\n"), rc_6.radio_min, rc_6.radio_max);
Serial.printf_P(PSTR("CH7: %d | %d\n"), rc_7.radio_min, rc_7.radio_max);
Serial.printf_P(PSTR("CH8: %d | %d\n"), rc_8.radio_min, rc_8.radio_max);
}
void
print_switch(byte p, byte m)
{
Serial.printf_P(PSTR("Pos %d: "),p);
Serial.println(flight_mode_strings[m]);
}
void
print_done()
{
Serial.printf_P(PSTR("\nSaved Settings\n\n"));
}
void
print_blanks(int num)
{
while(num > 0){
num--;
Serial.println("");
}
}
void
print_divider(void)
{
for (int i = 0; i < 40; i++) {
Serial.print("-");
}
Serial.println("");
}
// for reading in vales for mode switch
boolean
radio_input_switch(void)
{
static byte bouncer;
if (abs(rc_1.radio_in - rc_1.radio_trim) > 200)
bouncer = 10;
if (bouncer > 0)
bouncer--;
if (bouncer == 1){
return true;
}else{
return false;
}
}
void zero_eeprom(void)
{
byte b;
Serial.printf_P(PSTR("\nErasing EEPROM\n"));
for (int i = 0; i < EEPROM_MAX_ADDR; i++) {
eeprom_write_byte((uint8_t *) i, b);
}
Serial.printf_P(PSTR("done\n"));
}
void print_enabled(boolean b)
{
if(b)
Serial.printf_P(PSTR("en"));
else
Serial.printf_P(PSTR("dis"));
Serial.printf_P(PSTR("abled\n"));
}