You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
243 lines
8.1 KiB
243 lines
8.1 KiB
-- knife edge on switch |
|
|
|
TRICK_NUMBER = 5 -- selector number recognized to execute trick, change as desired |
|
-- knife-edge angle set by AERO_TRICK_ANG, active for as long as trick id = 5 |
|
------------------------------------------------------------------- |
|
-- do not change anything below unless noted |
|
|
|
local running = false |
|
local not_bound = true |
|
local initial_yaw_deg = 0 |
|
local initial_height = 0 |
|
local repeat_count |
|
|
|
-- constrain a value between limits |
|
function constrain(v, vmin, vmax) |
|
if v < vmin then |
|
v = vmin |
|
end |
|
if v > vmax then |
|
v = vmax |
|
end |
|
return v |
|
end |
|
|
|
|
|
function wrap_360(angle) --function returns positive angle modulo360, -710 in returns 10, -10 returns +350 |
|
local res = math.fmod(angle, 360.0) |
|
if res < 0 then |
|
res = res + 360.0 |
|
end |
|
return res |
|
end |
|
|
|
function wrap_180(angle) |
|
local res = wrap_360(angle) |
|
if res > 180 then |
|
res = res - 360 |
|
end |
|
return res |
|
end |
|
|
|
-- a PI controller implemented as a Lua object |
|
local function PI_controller(kP,kI,iMax) |
|
-- the new instance. You can put public variables inside this self |
|
-- declaration if you want to |
|
local self = {} |
|
|
|
-- private fields as locals |
|
local _kP = kP or 0.0 |
|
local _kI = kI or 0.0 |
|
local _kD = kD or 0.0 |
|
local _iMax = iMax |
|
local _last_t = nil |
|
local _I = 0 |
|
local _P = 0 |
|
local _total = 0 |
|
local _counter = 0 |
|
local _target = 0 |
|
local _current = 0 |
|
|
|
-- update the controller. |
|
function self.update(target, current) |
|
local now = millis():tofloat() * 0.001 |
|
if not _last_t then |
|
_last_t = now |
|
end |
|
local dt = now - _last_t |
|
_last_t = now |
|
local err = target - current |
|
_counter = _counter + 1 |
|
|
|
local P = _kP * err |
|
_I = _I + _kI * err * dt |
|
if _iMax then |
|
_I = constrain(_I, -_iMax, iMax) |
|
end |
|
local I = _I |
|
local ret = P + I |
|
|
|
_target = target |
|
_current = current |
|
_P = P |
|
_total = ret |
|
return ret |
|
end |
|
|
|
-- reset integrator to an initial value |
|
function self.reset(integrator) |
|
_I = integrator |
|
end |
|
|
|
function self.set_I(I) |
|
_kI = I |
|
end |
|
|
|
function self.set_P(P) |
|
_kP = P |
|
end |
|
|
|
function self.set_Imax(Imax) |
|
_iMax = Imax |
|
end |
|
|
|
-- log the controller internals |
|
function self.log(name, add_total) |
|
-- allow for an external addition to total |
|
logger.write(name,'Targ,Curr,P,I,Total,Add','ffffff',_target,_current,_P,_I,_total,add_total) |
|
end |
|
-- return the instance |
|
return self |
|
end |
|
|
|
local function height_controller(kP_param,kI_param,KnifeEdge_param,Imax) |
|
local self = {} |
|
local kP = kP_param |
|
local kI = kI_param |
|
local KnifeEdge = KnifeEdge_param |
|
local PI = PI_controller(kP:get(), kI:get(), Imax) |
|
|
|
function self.update(target) |
|
local target_pitch = PI.update(initial_height, ahrs:get_position():alt()*0.01) |
|
local roll_rad = ahrs:get_roll() |
|
local ke_add = math.abs(math.sin(roll_rad)) * KnifeEdge:get() |
|
target_pitch = target_pitch + ke_add |
|
PI.log("HPI", ke_add) |
|
return constrain(target_pitch,-45,45) |
|
end |
|
|
|
function self.reset() |
|
PI.reset(math.max(math.deg(ahrs:get_pitch()), 3.0)) |
|
PI.set_P(kP:get()) |
|
PI.set_I(kI:get()) |
|
end |
|
|
|
return self |
|
end |
|
|
|
-- a controller to target a zero pitch angle and zero heading change, used in a roll |
|
-- output is a body frame pitch rate, with convergence over time tconst in seconds |
|
function pitch_controller(target_pitch_deg, target_yaw_deg, tconst) |
|
local roll_deg = math.deg(ahrs:get_roll()) |
|
local pitch_deg = math.deg(ahrs:get_pitch()) |
|
local yaw_deg = math.deg(ahrs:get_yaw()) |
|
|
|
-- get earth frame pitch and yaw rates |
|
local ef_pitch_rate = (target_pitch_deg - pitch_deg) / tconst |
|
local ef_yaw_rate = wrap_180(target_yaw_deg - yaw_deg) / tconst |
|
|
|
local bf_pitch_rate = math.sin(math.rad(roll_deg)) * ef_yaw_rate + math.cos(math.rad(roll_deg)) * ef_pitch_rate |
|
local bf_yaw_rate = math.cos(math.rad(roll_deg)) * ef_yaw_rate - math.sin(math.rad(roll_deg)) * ef_pitch_rate |
|
return bf_pitch_rate, bf_yaw_rate |
|
end |
|
|
|
-- a controller for throttle to account for pitch |
|
function throttle_controller() |
|
local pitch_rad = ahrs:get_pitch() |
|
local thr_ff = THR_PIT_FF:get() |
|
local throttle = TRIM_THROTTLE:get() + math.sin(pitch_rad) * thr_ff |
|
return constrain(throttle, TRIM_THROTTLE:get(), 100.0) |
|
end |
|
|
|
function bind_param(name) |
|
local p = Parameter() |
|
if not p:init(name) then |
|
not_bound = true |
|
end |
|
return p |
|
end |
|
---------------------------------------------------------------------------------------------- |
|
--every trick needs an init, change as needed...to bind the AERO params it uses(which will depend on the trick), and setup PID controllers used by script |
|
|
|
function init() |
|
not_bound = false |
|
HGT_P = bind_param("AERO_HGT_P") -- height P gain, required for height controller |
|
HGT_I = bind_param("AERO_HGT_I") -- height I gain, required for height controller |
|
HGT_KE_BIAS = bind_param("AERO_HGT_KE_BIAS") -- height knifeedge addition for pitch |
|
THR_PIT_FF = bind_param("AERO_THR_PIT_FF") -- throttle FF from pitch |
|
TRIM_THROTTLE = bind_param("TRIM_THROTTLE") --usually required for any trick |
|
TRIM_ARSPD_CM = bind_param("TRIM_ARSPD_CM") --usually required for any trick |
|
RLL2SRV_TCONST = bind_param("RLL2SRV_TCONST") --usually required for any trick |
|
PITCH_TCONST = bind_param("PTCH2SRV_TCONST") --usually required for any trick |
|
KE_ANG = bind_param("AERO_TRICK_ANG") --this particulat trick needs a target angle for the knife-edge its doing |
|
TRICK_ID = bind_param("AERO_TRICK_ID") --- required for any trick |
|
RPT_COUNT = bind_param("AERO_RPT_COUNT") -- if trick can repeat |
|
if not_bound then |
|
gcs:send_text(0,string.format("Not bound yet")) |
|
return init, 100 |
|
else |
|
gcs:send_text(0,string.format("Params bound,Trick %.0f loaded", TRICK_NUMBER)) |
|
height_PI = height_controller(HGT_P, HGT_I, HGT_KE_BIAS, 20.0) -- this trick needs this height PID controller setup to hold height during the trick |
|
return update, 1000 |
|
end |
|
end |
|
----------------------------------------------------------------------------------------------- |
|
--every trick will have its own do_trick function to perform the trick...this will change totally for each different trick |
|
|
|
function do_trick(arg1) |
|
-- arg1 is angle +/-180 |
|
local roll_deg = math.deg(ahrs:get_roll()) |
|
local roll_angle_error = (arg1 - roll_deg) |
|
if math.abs(roll_angle_error) > 180 then |
|
if roll_angle_error > 0 then |
|
roll_angle_error = roll_angle_error - 360 |
|
else |
|
roll_angle_error= roll_angle_error +360 |
|
end |
|
end |
|
local roll_rate = roll_angle_error/(RLL2SRV_TCONST:get()) |
|
local target_pitch = height_PI.update(initial_height) |
|
local pitch_rate, yaw_rate = pitch_controller(target_pitch, initial_yaw_deg, PITCH_TCONST:get()) |
|
local throttle = throttle_controller() |
|
vehicle:set_target_throttle_rate_rpy(throttle, roll_rate, pitch_rate, yaw_rate) |
|
return |
|
end |
|
------------------------------------------------------------------------------------------- |
|
--trick should noramlly only have to change the notification text in this routine,initialize trick specific variables, and any parameters needing to be passed to do_trick(..) |
|
|
|
function update() |
|
if (TRICK_ID:get() == TRICK_NUMBER) then |
|
local current_mode = vehicle:get_mode() |
|
if arming:is_armed() and running == false then |
|
if not vehicle:nav_scripting_enable(current_mode) then |
|
return update, 50 |
|
end |
|
running = true |
|
initial_height = ahrs:get_position():alt()*0.01 |
|
initial_yaw_deg = math.deg(ahrs:get_yaw()) |
|
height_PI.reset() |
|
repeat_count = RPT_COUNT:get() --not used in this trick, knife-edge on as long as mode does not change or sw is not lowered |
|
-----------------------------------------------trick specific |
|
gcs:send_text(0, string.format("%d Knife edge", KE_ANG:get())) --change announcement as appropriate for trick |
|
---------------------------------------------------------- |
|
elseif running == true then |
|
do_trick(KE_ANG:get()) -- change arguments as appropriate for trick |
|
end |
|
else |
|
running = false |
|
end |
|
return update, 50 |
|
end |
|
|
|
return init,1000 |
|
|
|
|