zrzk
/
ardupilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
31053 Commits
23 Branches
0 Tags
282 MiB
 
 
 
 
 
 
Tree: 29078824fc
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '29078824fc'
${ noResults }
ardupilot/libraries/AP_HAL_F4Light/hardware/hal/timer.h

1148 lines
42 KiB
Raw Blame History

/******************************************************************************
* The MIT License
(c) 2017 night_ghost@ykoctpa.ru
based on:
* Copyright (c) 2011 LeafLabs, LLC.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*****************************************************************************/
/**
* @file timer.h
based on timer's code from LeafLabs by Marti Bolivar <mbolivar@leaflabs.com>
* @brief timer interface.
*
*/
#ifndef _TIMERS_H_
#define _TIMERS_H_
#include "hal_types.h"
#include "bitband.h"
#include "dma.h"
#define BOARD_PWM_MODE TIM_OCMode_PWM1
/**
* @brief Timer type
*
* Type marker for timer_dev.
*
* @see timer_dev
*/
typedef enum timer_type {
TIMER_ADVANCED, /**< Advanced type */
TIMER_GENERAL, /**< General purpose type */
TIMER_BASIC /**< Basic type */
} timer_type;
typedef void (* TimerHandler)(TIM_TypeDef *tim);
void TIM2_IRQHandler(void);
void TIM3_IRQHandler(void);
void TIM4_IRQHandler(void);
void TIM5_IRQHandler(void);
void TIM6_IRQHandler(void);
void TIM7_IRQHandler(void);
void TIM8_IRQHandler(void);
/*
* Register bit definitions
*/
/* Control register 1 (CR1) */
#define TIMER_CR1_ARPE_BIT 7
#define TIMER_CR1_DIR_BIT 4
#define TIMER_CR1_OPM_BIT 3
#define TIMER_CR1_URS_BIT 2
#define TIMER_CR1_UDIS_BIT 1
#define TIMER_CR1_CEN_BIT 0
#define TIMER_CR1_CKD (0x3 << 8)
#define TIMER_CR1_CKD_1TCKINT (0x0 << 8)
#define TIMER_CR1_CKD_2TCKINT (0x1 << 8)
#define TIMER_CR1_CKD_4TICKINT (0x2 << 8)
#define TIMER_CR1_ARPE BIT(TIMER_CR1_ARPE_BIT)
#define TIMER_CR1_CKD_CMS (0x3 << 5)
#define TIMER_CR1_CKD_CMS_EDGE (0x0 << 5)
#define TIMER_CR1_CKD_CMS_CENTER1 (0x1 << 5)
#define TIMER_CR1_CKD_CMS_CENTER2 (0x2 << 5)
#define TIMER_CR1_CKD_CMS_CENTER3 (0x3 << 5)
#define TIMER_CR1_DIR BIT(TIMER_CR1_DIR_BIT)
#define TIMER_CR1_OPM BIT(TIMER_CR1_OPM_BIT)
#define TIMER_CR1_URS BIT(TIMER_CR1_URS_BIT)
#define TIMER_CR1_UDIS BIT(TIMER_CR1_UDIS_BIT)
#define TIMER_CR1_CEN BIT(TIMER_CR1_CEN_BIT)
/* Control register 2 (CR2) */
#define TIMER_CR2_OIS4_BIT 14
#define TIMER_CR2_OIS3N_BIT 13
#define TIMER_CR2_OIS3_BIT 12
#define TIMER_CR2_OIS2N_BIT 11
#define TIMER_CR2_OIS2_BIT 10
#define TIMER_CR2_OIS1N_BIT 9
#define TIMER_CR2_OIS1_BIT 8
#define TIMER_CR2_TI1S_BIT 7 /* tills? yikes */
#define TIMER_CR2_CCDS_BIT 3
#define TIMER_CR2_CCUS_BIT 2
#define TIMER_CR2_CCPC_BIT 0
#define TIMER_CR2_OIS4 BIT(TIMER_CR2_OIS4_BIT)
#define TIMER_CR2_OIS3N BIT(TIMER_CR2_OIS3N_BIT)
#define TIMER_CR2_OIS3 BIT(TIMER_CR2_OIS3_BIT)
#define TIMER_CR2_OIS2N BIT(TIMER_CR2_OIS2N_BIT)
#define TIMER_CR2_OIS2 BIT(TIMER_CR2_OIS2_BIT)
#define TIMER_CR2_OIS1N BIT(TIMER_CR2_OIS1N_BIT)
#define TIMER_CR2_OIS1 BIT(TIMER_CR2_OIS1_BIT)
#define TIMER_CR2_TI1S BIT(TIMER_CR2_TI1S_BIT)
#define TIMER_CR2_MMS (0x7 << 4)
#define TIMER_CR2_MMS_RESET (0x0 << 4)
#define TIMER_CR2_MMS_ENABLE (0x1 << 4)
#define TIMER_CR2_MMS_UPDATE (0x2 << 4)
#define TIMER_CR2_MMS_COMPARE_PULSE (0x3 << 4)
#define TIMER_CR2_MMS_COMPARE_OC1REF (0x4 << 4)
#define TIMER_CR2_MMS_COMPARE_OC2REF (0x5 << 4)
#define TIMER_CR2_MMS_COMPARE_OC3REF (0x6 << 4)
#define TIMER_CR2_MMS_COMPARE_OC4REF (0x7 << 4)
#define TIMER_CR2_CCDS BIT(TIMER_CR2_CCDS_BIT)
#define TIMER_CR2_CCUS BIT(TIMER_CR2_CCUS_BIT)
#define TIMER_CR2_CCPC BIT(TIMER_CR2_CCPC_BIT)
/* Slave mode control register (SMCR) */
#define TIMER_SMCR_ETP_BIT 15
#define TIMER_SMCR_ECE_BIT 14
#define TIMER_SMCR_MSM_BIT 7
#define TIMER_SMCR_ETP BIT(TIMER_SMCR_ETP_BIT)
#define TIMER_SMCR_ECE BIT(TIMER_SMCR_ECE_BIT)
#define TIMER_SMCR_ETPS (0x3 << 12)
#define TIMER_SMCR_ETPS_OFF (0x0 << 12)
#define TIMER_SMCR_ETPS_DIV2 (0x1 << 12)
#define TIMER_SMCR_ETPS_DIV4 (0x2 << 12)
#define TIMER_SMCR_ETPS_DIV8 (0x3 << 12)
#define TIMER_SMCR_ETF (0xF << 12)
#define TIMER_SMCR_MSM BIT(TIMER_SMCR_MSM_BIT)
#define TIMER_SMCR_TS (0x3 << 4)
#define TIMER_SMCR_TS_ITR0 (0x0 << 4)
#define TIMER_SMCR_TS_ITR1 (0x1 << 4)
#define TIMER_SMCR_TS_ITR2 (0x2 << 4)
#define TIMER_SMCR_TS_ITR3 (0x3 << 4)
#define TIMER_SMCR_TS_TI1F_ED (0x4 << 4)
#define TIMER_SMCR_TS_TI1FP1 (0x5 << 4)
#define TIMER_SMCR_TS_TI2FP2 (0x6 << 4)
#define TIMER_SMCR_TS_ETRF (0x7 << 4)
#define TIMER_SMCR_SMS 0x3
#define TIMER_SMCR_SMS_DISABLED 0x0
#define TIMER_SMCR_SMS_ENCODER1 0x1
#define TIMER_SMCR_SMS_ENCODER2 0x2
#define TIMER_SMCR_SMS_ENCODER3 0x3
#define TIMER_SMCR_SMS_RESET 0x4
#define TIMER_SMCR_SMS_GATED 0x5
#define TIMER_SMCR_SMS_TRIGGER 0x6
#define TIMER_SMCR_SMS_EXTERNAL 0x7
/* DMA/Interrupt enable register (DIER) */
#define TIMER_DIER_TDE_BIT 14
#define TIMER_DIER_CC4DE_BIT 12
#define TIMER_DIER_CC3DE_BIT 11
#define TIMER_DIER_CC2DE_BIT 10
#define TIMER_DIER_CC1DE_BIT 9
#define TIMER_DIER_UDE_BIT 8
#define TIMER_DIER_TIE_BIT 6
#define TIMER_DIER_CC4IE_BIT 4
#define TIMER_DIER_CC3IE_BIT 3
#define TIMER_DIER_CC2IE_BIT 2
#define TIMER_DIER_CC1IE_BIT 1
#define TIMER_DIER_UIE_BIT 0
#define TIMER_DIER_TDE BIT(TIMER_DIER_TDE_BIT)
#define TIMER_DIER_CC4DE BIT(TIMER_DIER_CC4DE_BIT)
#define TIMER_DIER_CC3DE BIT(TIMER_DIER_CC3DE_BIT)
#define TIMER_DIER_CC2DE BIT(TIMER_DIER_CC2DE_BIT)
#define TIMER_DIER_CC1DE BIT(TIMER_DIER_CC1DE_BIT)
#define TIMER_DIER_UDE BIT(TIMER_DIER_UDE_BIT)
#define TIMER_DIER_TIE BIT(TIMER_DIER_TIE_BIT)
#define TIMER_DIER_CC4IE BIT(TIMER_DIER_CC4IE_BIT)
#define TIMER_DIER_CC3IE BIT(TIMER_DIER_CC3IE_BIT)
#define TIMER_DIER_CC2IE BIT(TIMER_DIER_CC2IE_BIT)
#define TIMER_DIER_CC1IE BIT(TIMER_DIER_CC1IE_BIT)
#define TIMER_DIER_UIE BIT(TIMER_DIER_UIE_BIT)
/* Status register (SR) */
#define TIMER_SR_CC4OF_BIT 12
#define TIMER_SR_CC3OF_BIT 11
#define TIMER_SR_CC2OF_BIT 10
#define TIMER_SR_CC1OF_BIT 9
#define TIMER_SR_BIF_BIT 7
#define TIMER_SR_TIF_BIT 6
#define TIMER_SR_COMIF_BIT 5
#define TIMER_SR_CC4IF_BIT 4
#define TIMER_SR_CC3IF_BIT 3
#define TIMER_SR_CC2IF_BIT 2
#define TIMER_SR_CC1IF_BIT 1
#define TIMER_SR_UIF_BIT 0
#define TIMER_SR_CC4OF BIT(TIMER_SR_CC4OF_BIT)
#define TIMER_SR_CC3OF BIT(TIMER_SR_CC3OF_BIT)
#define TIMER_SR_CC2OF BIT(TIMER_SR_CC2OF_BIT)
#define TIMER_SR_CC1OF BIT(TIMER_SR_CC1OF_BIT)
#define TIMER_SR_BIF BIT(TIMER_SR_BIF_BIT)
#define TIMER_SR_TIF BIT(TIMER_SR_TIF_BIT)
#define TIMER_SR_COMIF BIT(TIMER_SR_COMIF_BIT)
#define TIMER_SR_CC4IF BIT(TIMER_SR_CC4IF_BIT)
#define TIMER_SR_CC3IF BIT(TIMER_SR_CC3IF_BIT)
#define TIMER_SR_CC2IF BIT(TIMER_SR_CC2IF_BIT)
#define TIMER_SR_CC1IF BIT(TIMER_SR_CC1IF_BIT)
#define TIMER_SR_UIF BIT(TIMER_SR_UIF_BIT)
/* Event generation register (EGR) */
#define TIMER_EGR_TG_BIT 6
#define TIMER_EGR_CC4G_BIT 4
#define TIMER_EGR_CC3G_BIT 3
#define TIMER_EGR_CC2G_BIT 2
#define TIMER_EGR_CC1G_BIT 1
#define TIMER_EGR_UG_BIT 0
#define TIMER_EGR_TG BIT(TIMER_EGR_TG_BIT)
#define TIMER_EGR_CC4G BIT(TIMER_EGR_CC4G_BIT)
#define TIMER_EGR_CC3G BIT(TIMER_EGR_CC3G_BIT)
#define TIMER_EGR_CC2G BIT(TIMER_EGR_CC2G_BIT)
#define TIMER_EGR_CC1G BIT(TIMER_EGR_CC1G_BIT)
#define TIMER_EGR_UG BIT(TIMER_EGR_UG_BIT)
/* Capture/compare mode registers, common values */
#define TIMER_CCMR_CCS_OUTPUT 0x0
#define TIMER_CCMR_CCS_INPUT_TI1 0x1
#define TIMER_CCMR_CCS_INPUT_TI2 0x2
#define TIMER_CCMR_CCS_INPUT_TRC 0x3
/* Capture/compare mode register 1 (CCMR1) */
#define TIMER_CCMR1_OC2CE_BIT 15
#define TIMER_CCMR1_OC2PE_BIT 11
#define TIMER_CCMR1_OC2FE_BIT 10
#define TIMER_CCMR1_OC1CE_BIT 7
#define TIMER_CCMR1_OC1PE_BIT 3
#define TIMER_CCMR1_OC1FE_BIT 2
#define TIMER_CCMR1_OC2CE BIT(TIMER_CCMR1_OC2CE_BIT)
#define TIMER_CCMR1_OC2M (0x3 << 12)
#define TIMER_CCMR1_IC2F (0xF << 12)
#define TIMER_CCMR1_OC2PE BIT(TIMER_CCMR1_OC2PE_BIT)
#define TIMER_CCMR1_OC2FE BIT(TIMER_CCMR1_OC2FE_BIT)
#define TIMER_CCMR1_IC2PSC (0x3 << 10)
#define TIMER_CCMR1_CC2S (0x3 << 8)
#define TIMER_CCMR1_CC2S_OUTPUT (TIMER_CCMR_CCS_OUTPUT << 8)
#define TIMER_CCMR1_CC2S_INPUT_TI1 (TIMER_CCMR_CCS_INPUT_TI1 << 8)
#define TIMER_CCMR1_CC2S_INPUT_TI2 (TIMER_CCMR_CCS_INPUT_TI2 << 8)
#define TIMER_CCMR1_CC2S_INPUT_TRC (TIMER_CCMR_CCS_INPUT_TRC << 8)
#define TIMER_CCMR1_OC1CE BIT(TIMER_CCMR1_OC1CE_BIT)
#define TIMER_CCMR1_OC1M (0x3 << 4)
#define TIMER_CCMR1_IC1F (0xF << 4)
#define TIMER_CCMR1_OC1PE BIT(TIMER_CCMR1_OC1PE_BIT)
#define TIMER_CCMR1_OC1FE BIT(TIMER_CCMR1_OC1FE_BIT)
#define TIMER_CCMR1_IC1PSC (0x3 << 2)
#define TIMER_CCMR1_CC1S 0x3
#define TIMER_CCMR1_CC1S_OUTPUT TIMER_CCMR_CCS_OUTPUT
#define TIMER_CCMR1_CC1S_INPUT_TI1 TIMER_CCMR_CCS_INPUT_TI1
#define TIMER_CCMR1_CC1S_INPUT_TI2 TIMER_CCMR_CCS_INPUT_TI2
#define TIMER_CCMR1_CC1S_INPUT_TRC TIMER_CCMR_CCS_INPUT_TRC
/* Capture/compare mode register 2 (CCMR2) */
#define TIMER_CCMR2_OC4CE_BIT 15
#define TIMER_CCMR2_OC4PE_BIT 11
#define TIMER_CCMR2_OC4FE_BIT 10
#define TIMER_CCMR2_OC3CE_BIT 7
#define TIMER_CCMR2_OC3PE_BIT 3
#define TIMER_CCMR2_OC3FE_BIT 2
#define TIMER_CCMR2_OC4CE BIT(TIMER_CCMR2_OC4CE_BIT)
#define TIMER_CCMR2_OC4M (0x3 << 12)
#define TIMER_CCMR2_IC2F (0xF << 12)
#define TIMER_CCMR2_OC4PE BIT(TIMER_CCMR2_OC4PE_BIT)
#define TIMER_CCMR2_OC4FE BIT(TIMER_CCMR2_OC4FE_BIT)
#define TIMER_CCMR2_IC2PSC (0x3 << 10)
#define TIMER_CCMR2_CC4S (0x3 << 8)
#define TIMER_CCMR1_CC4S_OUTPUT (TIMER_CCMR_CCS_OUTPUT << 8)
#define TIMER_CCMR1_CC4S_INPUT_TI1 (TIMER_CCMR_CCS_INPUT_TI1 << 8)
#define TIMER_CCMR1_CC4S_INPUT_TI2 (TIMER_CCMR_CCS_INPUT_TI2 << 8)
#define TIMER_CCMR1_CC4S_INPUT_TRC (TIMER_CCMR_CCS_INPUT_TRC << 8)
#define TIMER_CCMR2_OC3CE BIT(TIMER_CCMR2_OC3CE_BIT)
#define TIMER_CCMR2_OC3M (0x3 << 4)
#define TIMER_CCMR2_IC1F (0xF << 4)
#define TIMER_CCMR2_OC3PE BIT(TIMER_CCMR2_OC3PE_BIT)
#define TIMER_CCMR2_OC3FE BIT(TIMER_CCMR2_OC3FE_BIT)
#define TIMER_CCMR2_IC1PSC (0x3 << 2)
#define TIMER_CCMR2_CC3S 0x3
#define TIMER_CCMR1_CC3S_OUTPUT TIMER_CCMR_CCS_OUTPUT
#define TIMER_CCMR1_CC3S_INPUT_TI1 TIMER_CCMR_CCS_INPUT_TI1
#define TIMER_CCMR1_CC3S_INPUT_TI2 TIMER_CCMR_CCS_INPUT_TI2
#define TIMER_CCMR1_CC3S_INPUT_TRC TIMER_CCMR_CCS_INPUT_TRC
/* Capture/compare enable register (CCER) */
#define TIMER_CCER_CC4P_BIT 13
#define TIMER_CCER_CC4E_BIT 12
#define TIMER_CCER_CC3NP_BIT 11
#define TIMER_CCER_CC3NE_BIT 10
#define TIMER_CCER_CC3P_BIT 9
#define TIMER_CCER_CC3E_BIT 8
#define TIMER_CCER_CC2NP_BIT 7
#define TIMER_CCER_CC2NE_BIT 6
#define TIMER_CCER_CC2P_BIT 5
#define TIMER_CCER_CC2E_BIT 4
#define TIMER_CCER_CC1NP_BIT 3
#define TIMER_CCER_CC1NE_BIT 2
#define TIMER_CCER_CC1P_BIT 1
#define TIMER_CCER_CC1E_BIT 0
#define TIMER_CCER_CC4P BIT(TIMER_CCER_CC4P_BIT)
#define TIMER_CCER_CC4E BIT(TIMER_CCER_CC4E_BIT)
#define TIMER_CCER_CC3P BIT(TIMER_CCER_CC3P_BIT)
#define TIMER_CCER_CC3E BIT(TIMER_CCER_CC3E_BIT)
#define TIMER_CCER_CC2P BIT(TIMER_CCER_CC2P_BIT)
#define TIMER_CCER_CC2E BIT(TIMER_CCER_CC2E_BIT)
#define TIMER_CCER_CC1P BIT(TIMER_CCER_CC1P_BIT)
#define TIMER_CCER_CC1E BIT(TIMER_CCER_CC1E_BIT)
#define TIMER_CCER_CC3NP BIT(TIMER_CCER_CC3NP_BIT)
#define TIMER_CCER_CC3NE BIT(TIMER_CCER_CC3NE_BIT)
#define TIMER_CCER_CC2NP BIT(TIMER_CCER_CC2NP_BIT)
#define TIMER_CCER_CC2NE BIT(TIMER_CCER_CC2NE_BIT)
#define TIMER_CCER_CC1NP BIT(TIMER_CCER_CC1NP_BIT)
#define TIMER_CCER_CC1NE BIT(TIMER_CCER_CC1NE_BIT)
/* Break and dead-time register (BDTR) */
#define TIMER_BDTR_MOE_BIT 15
#define TIMER_BDTR_AOE_BIT 14
#define TIMER_BDTR_BKP_BIT 13
#define TIMER_BDTR_BKE_BIT 12
#define TIMER_BDTR_OSSR_BIT 11
#define TIMER_BDTR_OSSI_BIT 10
#define TIMER_BDTR_MOE BIT(TIMER_BDTR_MOE_BIT)
#define TIMER_BDTR_AOE BIT(TIMER_BDTR_AOE_BIT)
#define TIMER_BDTR_BKP BIT(TIMER_BDTR_BKP_BIT)
#define TIMER_BDTR_BKE BIT(TIMER_BDTR_BKE_BIT)
#define TIMER_BDTR_OSSR BIT(TIMER_BDTR_OSSR_BIT)
#define TIMER_BDTR_OSSI BIT(TIMER_BDTR_OSSI_BIT)
#define TIMER_BDTR_LOCK (0x3 << 8)
#define TIMER_BDTR_LOCK_OFF (0x0 << 8)
#define TIMER_BDTR_LOCK_LEVEL1 (0x1 << 8)
#define TIMER_BDTR_LOCK_LEVEL2 (0x2 << 8)
#define TIMER_BDTR_LOCK_LEVEL3 (0x3 << 8)
#define TIMER_BDTR_DTG 0xFF
/* DMA control register (DCR) */
#define TIMER_DCR_DBL (0x1F << 8)
#define TIMER_DCR_DBL_1BYTE (0x0 << 8)
#define TIMER_DCR_DBL_2BYTE (0x1 << 8)
#define TIMER_DCR_DBL_3BYTE (0x2 << 8)
#define TIMER_DCR_DBL_4BYTE (0x3 << 8)
#define TIMER_DCR_DBL_5BYTE (0x4 << 8)
#define TIMER_DCR_DBL_6BYTE (0x5 << 8)
#define TIMER_DCR_DBL_7BYTE (0x6 << 8)
#define TIMER_DCR_DBL_8BYTE (0x7 << 8)
#define TIMER_DCR_DBL_9BYTE (0x8 << 8)
#define TIMER_DCR_DBL_10BYTE (0x9 << 8)
#define TIMER_DCR_DBL_11BYTE (0xA << 8)
#define TIMER_DCR_DBL_12BYTE (0xB << 8)
#define TIMER_DCR_DBL_13BYTE (0xC << 8)
#define TIMER_DCR_DBL_14BYTE (0xD << 8)
#define TIMER_DCR_DBL_15BYTE (0xE << 8)
#define TIMER_DCR_DBL_16BYTE (0xF << 8)
#define TIMER_DCR_DBL_17BYTE (0x10 << 8)
#define TIMER_DCR_DBL_18BYTE (0x11 << 8)
#define TIMER_DCR_DBA 0x1F
#define TIMER_DCR_DBA_CR1 0x0
#define TIMER_DCR_DBA_CR2 0x1
#define TIMER_DCR_DBA_SMCR 0x2
#define TIMER_DCR_DBA_DIER 0x3
#define TIMER_DCR_DBA_SR 0x4
#define TIMER_DCR_DBA_EGR 0x5
#define TIMER_DCR_DBA_CCMR1 0x6
#define TIMER_DCR_DBA_CCMR2 0x7
#define TIMER_DCR_DBA_CCER 0x8
#define TIMER_DCR_DBA_CNT 0x9
#define TIMER_DCR_DBA_PSC 0xA
#define TIMER_DCR_DBA_ARR 0xB
#define TIMER_DCR_DBA_RCR 0xC
#define TIMER_DCR_DBA_CCR1 0xD
#define TIMER_DCR_DBA_CCR2 0xE
#define TIMER_DCR_DBA_CCR3 0xF
#define TIMER_DCR_DBA_CCR4 0x10
#define TIMER_DCR_DBA_BDTR 0x11
#define TIMER_DCR_DBA_DCR 0x12
#define TIMER_DCR_DBA_DMAR 0x13
/*
* Convenience routines
*/
/**
* Used to configure the behavior of a timer channel. Note that not
* all timers can be configured in every mode.
*/
/* TODO TIMER_PWM_CENTER_ALIGNED, TIMER_INPUT_CAPTURE, TIMER_ONE_PULSE */
typedef enum timer_mode {
TIMER_DISABLED, /**< In this mode, the timer stops counting,
channel interrupts are detached, and no state
changes are output. */
TIMER_PWM, /**< PWM output mode. This is the default mode for pins
after initialization. */
/* TIMER_PWM_CENTER_ALIGNED, /\**< Center-aligned PWM output mode. *\/ */
TIMER_OUTPUT_COMPARE, /**< In this mode, the timer counts from 0
to its reload value repeatedly; every
time the counter value reaches one of
the channel compare values, the
corresponding interrupt is fired. */
/* TIMER_INPUT_CAPTURE, /\**< In this mode, the timer can measure the */
/* pulse lengths of input signals. *\/ */
/* TIMER_ONE_PULSE /\**< In this mode, the timer can generate a single */
/* pulse on a GPIO pin for a specified amount of */
/* time. *\/ */
} timer_mode;
/** Timer channel numbers */
typedef enum timer_Channel {
NO_CH = 0,
TIMER_CH1 = 1, /**< Channel 1 */
TIMER_CH2 = 2, /**< Channel 2 */
TIMER_CH3 = 3, /**< Channel 3 */
TIMER_CH4 = 4, /**< Channel 4 */
TIMER_CH_MAX = 8,
TIMER_CH1N = 9, /**< Channel 1N */
TIMER_CH2N = 10, /**< Channel 2N */
TIMER_CH3N = 11, /**< Channel 3N */
} timer_Channel;
#define TIMER_CH_MASK 7
enum {
TIMER_OUTPUT_ENABLED = 0x01,
TIMER_OUTPUT_INVERTED = 0x02,
TIMER_OUTPUT_N_CHANNEL= 0x04
};
#ifdef __cplusplus
#define CONSTEXPR constexpr
extern "C" {
#else
#define CONSTEXPR
#endif
/**
* @brief Timer interrupt number.
*
* Not all timers support all of these values; see the descriptions
* for each value.
*/
typedef enum timer_interrupt_id {
TIMER_UPDATE_INTERRUPT=0, /**< Update interrupt, available on all timers. */
TIMER_CC1_INTERRUPT, /**< Capture/compare 1 interrupt, available on general and advanced timers only. */
TIMER_CC2_INTERRUPT, /**< Capture/compare 2 interrupt, general and advanced timers only. */
TIMER_CC3_INTERRUPT, /**< Capture/compare 3 interrupt, general and advanced timers only. */
TIMER_CC4_INTERRUPT, /**< Capture/compare 4 interrupt, general and advanced timers only. */
TIMER_COM_INTERRUPT, /**< COM interrupt, advanced timers only */
TIMER_TRG_INTERRUPT, /**< Trigger interrupt, general and advanced timers only */
TIMER_BREAK_INTERRUPT /**< Break interrupt, advanced timers only. */
} timer_interrupt_id;
typedef enum timer_oc_mode {
TIMER_OC_MODE_FROZEN = 0 << 4, /**< Frozen: comparison between output
compare register and counter has no
effect on the outputs. */
TIMER_OC_MODE_ACTIVE_ON_MATCH = 1 << 4, /**< OCxREF signal is forced
high when the count matches
the channel capture/compare
register. */
TIMER_OC_MODE_INACTIVE_ON_MATCH = 2 << 4, /**< OCxREF signal is forced
low when the counter matches
the channel capture/compare
register. */
TIMER_OC_MODE_TOGGLE = 3 << 4, /**< OCxREF toggles when counter
matches the cannel capture/compare
register. */
TIMER_OC_MODE_FORCE_INACTIVE = 4 << 4, /**< OCxREF is forced low. */
TIMER_OC_MODE_FORCE_ACTIVE = 5 << 4, /**< OCxREF is forced high. */
TIMER_OC_MODE_PWM_1 = 6 << 4, /**< PWM mode 1. In upcounting, channel is
active as long as count is less than
channel capture/compare register, else
inactive. In downcounting, channel is
inactive as long as count exceeds
capture/compare register, else
active. */
TIMER_OC_MODE_PWM_2 = 7 << 4 /**< PWM mode 2. In upcounting, channel is
inactive as long as count is less than
capture/compare register, else active.
In downcounting, channel is active as
long as count exceeds capture/compare
register, else inactive. */
} timer_oc_mode;
/*
01: CC1 channel is configured as input, IC1 is mapped on TI1.
10: CC1 channel is configured as input, IC1 is mapped on TI2.
11: CC1 channel is configured as input, IC1 is mapped on TRC. This mode is working only if
an internal trigger input is selected through TS bit (TIMx_SMCR register)
*/
typedef enum timer_ic_mode {
TIMER_IC_MODE_TI1 = 1,//TIM_ICSelection_DirectTI
TIMER_IC_MODE_TI2 = 2,//TIM_ICSelection_IndirectTI
TIMER_IC_MODE_TRC = 3,
} timer_ic_mode;
typedef enum Timer_cc_Polarity {
TIMER_POLARITY_FALLING=0,
TIMER_POLARITY_RISING =1,
//TIMER_POLARITY_BOTH =2, not supported
} timer_cc_polarity;
/**
* Timer output compare mode flags.
* @see timer_oc_set_mode()
*/
typedef enum timer_oc_mode_flags {
TIMER_OC_CE = BIT(7), /**< Output compare clear enable. */
TIMER_OC_PE = BIT(3), /**< Output compare preload enable. */
TIMER_OC_FE = BIT(2) /**< Output compare fast enable. */
} timer_oc_mode_flags;
typedef struct TimerState {
volatile uint8_t busy;
bool update;
uint32_t freq; // real frequency that programmed to timer
float freq_scale; // needed/real frequencies ratio
} timerState;
typedef struct TIM_DMA {
dma_stream dma_stream;
uint8_t dma_channel;
} Tim_dma;
/** Timer device type */
struct Timer_dev {
TIM_TypeDef *regs;
uint32_t clk;
Handler *handlers; // < User IRQ handlers
timerState *state;
Tim_dma ch_dma[4];
uint16_t af; // GPIO AF number
//
timer_type type; // < Timer's type
uint8_t n_handlers; // number of handlers
uint8_t bus; // APB1 or APB2
uint8_t id; // timer's number
//
};
typedef struct Timer_dev timer_dev;
extern const timer_dev timers[];
#define timer1 (timers[0])
#define timer2 (timers[1])
#define timer3 (timers[2])
#define timer4 (timers[3])
#define timer5 (timers[4])
#define timer6 (timers[5])
#define timer7 (timers[6])
#define timer8 (timers[7])
#define timer9 (timers[8])
#define timer10 (timers[9])
#define timer11 (timers[10])
#define timer12 (timers[11])
#define timer13 (timers[12])
#define timer14 (timers[13])
#define TIMER1 (&timer1)
#define TIMER2 (&timer2)
#define TIMER3 (&timer3)
#define TIMER4 (&timer4)
#define TIMER5 (&timer5)
#define TIMER6 (&timer6)
#define TIMER7 (&timer7)
#define TIMER8 (&timer8)
#define TIMER9 (&timer9)
#define TIMER10 (&timer10)
#define TIMER11 (&timer11)
#define TIMER12 (&timer12)
#define TIMER13 (&timer13)
#define TIMER14 (&timer14)
/*
* Note: Don't require timer_channel arguments! We want to be able to say
*
* for (int channel = 1; channel <= 4; channel++) {
* ...
* }
*
* without the compiler yelling at us.
*/
void timer_init(const timer_dev *dev);
void timer_reset(const timer_dev *dev);
void timer_disable(const timer_dev *dev);
void timer_set_mode(const timer_dev *dev, timer_Channel channel, timer_mode mode);
void timer_foreach(void (*fn)(const timer_dev*));
void timer_attach_interrupt(const timer_dev *dev, uint8_t interrupt, Handler handler, uint8_t priority);
void timer_detach_interrupt(const timer_dev *dev, uint8_t interrupt);
void timer_attach_all_interrupts(const timer_dev *dev, Handler handler);
uint32_t configTimeBase(const timer_dev *dev , uint16_t period, uint16_t khz);
void timer_enable_NVICirq(const timer_dev *dev, uint8_t interrupt, uint8_t priority);
void timer_disable_NVICirq(const timer_dev *dev, uint8_t interrupt);
static INLINE uint32_t get_timer_mask(const timer_dev *dev){
if(dev->regs == TIM2 || dev->regs == TIM5)
return 0xFFFFFFFF; // 32 bit
else
return 0xFFFF; // 16 bit
}
/**
* Initialize all timer devices on the chip.
*/
static inline void timer_init_all(void) {
timer_foreach(timer_init);
}
/**
* Disables all timers on the device.
*/
static inline void timer_disable_all(void) {
timer_foreach(timer_disable);
}
/**
* @brief Stop a timer's counter from changing.
*
* Does not affect the timer's mode or other settings.
*
* @param dev Device whose counter to pause.
*/
static INLINE void timer_pause(const timer_dev *dev) {
*bb_perip(&(dev->regs->CR1), TIMER_CR1_CEN_BIT) = 0;
}
/**
* @brief Start a timer's counter.
*
* Does not affect the timer's mode or other settings.
*
* @param dev Device whose counter to resume
*/
static INLINE void timer_resume(const timer_dev *dev) {
*bb_perip(&(dev->regs->CR1), TIMER_CR1_CEN_BIT) = 1;
}
/**
* @brief Returns the timer's counter value.
*
* This value is likely to be inaccurate if the counter is running
* with a low prescaler.
*
* @param dev Timer whose counter to return
*/
static INLINE uint16_t timer_get_count(const timer_dev *dev) {
return (uint16_t)(dev->regs->CNT);
}
static INLINE uint32_t timer_get_count32(const timer_dev *dev) {
return dev->regs->CNT;
}
/**
* @brief Sets the counter value for the given timer.
* @param dev Timer whose counter to set
* @param value New counter value
*/
static INLINE void timer_set_count(const timer_dev *dev, uint16_t value) {
dev->regs->CNT = value;
}
/**
* @brief Returns the given timer's prescaler.
*
* Note that if the timer's prescaler is set (e.g. via
* timer_set_prescaler() or accessing a TIMx_PSC register), the value
* returned by this function will reflect the new setting, but the
* timer's counter will only reflect the new prescaler at the next
* update event.
*
* @param dev Timer whose prescaler to return
* @see timer_generate_update()
*/
static inline uint16_t timer_get_prescaler(const timer_dev *dev) {
return (uint16_t)(dev->regs->PSC);
}
/**
* @brief Set a timer's prescale value.
*
* Divides the input clock by (PSC+1). The new value will not take
* effect until the next update event.
*
* @param dev Timer whose prescaler to set
* @param psc New prescaler value
* @see timer_generate_update()
*/
static inline void timer_set_prescaler(const timer_dev *dev, uint16_t psc) {
dev->regs->PSC = psc;
}
/**
* @brief Returns a timer's reload value.
* @param dev Timer whose reload value to return
*/
static inline uint16_t timer_get_reload(const timer_dev *dev) {
return (uint16_t)(dev->regs->ARR);
}
/**
* @brief Set a timer's reload value.
* @param dev Timer whose reload value to set
* @param arr New reload value to use. Takes effect at next update event.
* @see timer_generate_update()
*/
static INLINE void timer_set_reload(const timer_dev *dev, uint32_t arr) {
dev->regs->ARR = arr;
}
/**
* @brief Get the compare value for the given timer channel.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel whose compare value to get.
*/
static inline uint16_t timer_get_compare(const timer_dev *dev, timer_Channel channel) {
__IO uint32_t *ccr = &(dev->regs->CCR1) + ((channel&TIMER_CH_MASK) - 1);
return *ccr;
}
/**
* @brief Set the compare value for the given timer channel.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel whose compare value to set.
* @param value New compare value.
*/
static inline void timer_set_compare(const timer_dev *dev,
timer_Channel channel,
uint16_t value) {
__IO uint32_t *ccr = &(dev->regs->CCR1) + ((channel&TIMER_CH_MASK) - 1);
*ccr = value;
}
static INLINE uint16_t timer_get_capture(const timer_dev *dev, timer_Channel channel) {
__IO uint32_t *ccr = &(dev->regs->CCR1) + ((channel&TIMER_CH_MASK) - 1);
return *ccr;
}
/**
* @brief Generate an update event for the given timer.
*
* Normally, this will cause the prescaler and auto-reload values in
* the PSC and ARR registers to take immediate effect. However, this
* function will do nothing if the UDIS bit is set in the timer's CR1
* register (UDIS is cleared by default).
*
* @param dev Timer device to generate an update for.
*/
static inline void timer_generate_update(const timer_dev *dev) {
*bb_perip(&(dev->regs->EGR), TIMER_EGR_UG_BIT) = 1;
}
/**
* @brief Enable a timer's trigger DMA request
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL
*/
static inline void timer_dma_enable_trg_req(const timer_dev *dev) {
*bb_perip(&(dev->regs->DIER), TIMER_DIER_TDE_BIT) = 1;
}
/**
* @brief Disable a timer's trigger DMA request
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL
*/
static inline void timer_dma_disable_trg_req(const timer_dev *dev) {
*bb_perip(&(dev->regs->DIER), TIMER_DIER_TDE_BIT) = 0;
}
/**
* @brief Enable a timer channel's DMA request.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL
* @param channel Channel whose DMA request to enable.
*/
static inline void timer_dma_enable_req(const timer_dev *dev, timer_Channel channel) {
*bb_perip(&(dev->regs->DIER), (channel&TIMER_CH_MASK) + 8) = 1;
}
/**
* @brief Disable a timer channel's DMA request.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel whose DMA request to disable.
*/
static inline void timer_dma_disable_req(const timer_dev *dev, timer_Channel channel) {
*bb_perip(&(dev->regs->DIER), (channel&TIMER_CH_MASK) + 8) = 0;
}
/**
* @brief Enable a timer channel's capture/compare signal.
*
* If the channel is configured as output, the corresponding output
* compare signal will be output on the corresponding output pin. If
* the channel is configured as input, enables capture of the counter
* value into the input capture/compare register.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel to enable, from 1 to 4.
*/
static inline void timer_cc_enable(const timer_dev *dev, timer_Channel channel) {
#if 1
if(channel < TIMER_CH_MAX){
*bb_perip(&(dev->regs->CCER), 4 * (channel - 1)) = 1;
} else {
*bb_perip(&(dev->regs->CCER), 4 * ((channel&TIMER_CH_MASK) - 1) + 2) = 1;
}
#else
switch(channel) {
case 1:
dev->regs->CCER |= (uint16_t)TIM_CCER_CC1E;
break;
case 2:
dev->regs->CCER |= (uint16_t)TIM_CCER_CC2E;
break;
case 3:
dev->regs->CCER |= (uint16_t)TIM_CCER_CC3E;
break;
case 4:
dev->regs->CCER |= (uint16_t)TIM_CCER_CC4E;
break;
default:
break;
}
#endif
}
/**
* @brief Disable a timer channel's output compare or input capture signal.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel to disable, from 1 to 4.
* @see timer_cc_enable()
*/
static inline void timer_cc_disable(const timer_dev *dev, timer_Channel channel) {
#if 1
if(channel < TIMER_CH_MAX){
*bb_perip(&(dev->regs->CCER), 4 * (channel - 1)) = 0;
} else {
*bb_perip(&(dev->regs->CCER), 4 * ((channel&TIMER_CH_MASK) - 1) + 2) = 0;
}
#else
switch(channel){
case 1:
dev->regs->CCER &= (uint16_t)~TIM_CCER_CC1E;
break;
case 2:
dev->regs->CCER &= (uint16_t)~TIM_CCER_CC2E;
break;
case 3:
dev->regs->CCER &= (uint16_t)~TIM_CCER_CC3E;
break;
case 4:
dev->regs->CCER &= (uint16_t)~TIM_CCER_CC4E;
break;
default:
break;
}
#endif
}
/**
* @brief Get a channel's capture/compare output polarity
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel whose capture/compare output polarity to get.
* @return Polarity, either 0 or 1.
* @see timer_cc_set_polarity()
*/
static inline timer_cc_polarity timer_cc_get_pol(const timer_dev *dev, timer_Channel channel) {
if(channel < TIMER_CH_MAX){
return (timer_cc_polarity)(*bb_perip(&(dev->regs->CCER), 4 * (channel-1) + 1));
} else {
return (timer_cc_polarity)(*bb_perip(&(dev->regs->CCER), 4 * ((channel&TIMER_CH_MASK)-1) + 3));
}
}
/**
* @brief Set a timer channel's capture/compare output polarity.
*
* If the timer channel is configured as output: polarity == 0 means
* the output channel will be active high; polarity == 1 means active
* low.
*
* If the timer channel is configured as input: polarity == 0 means
* capture is done on the rising edge of ICn; when used as an external
* trigger, ICn is non-inverted. polarity == 1 means capture is done
* on the falling edge of ICn; when used as an external trigger, ICn
* is inverted.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel whose capture/compare output polarity to set.
* @param pol New polarity, 0 or 1.
*/
static inline void timer_cc_set_pol(const timer_dev *dev, timer_Channel channel, timer_cc_polarity pol) {
if(channel < TIMER_CH_MAX){
*bb_perip(&(dev->regs->CCER), 4 * (channel - 1) + 1) = pol;
}else {
*bb_perip(&(dev->regs->CCER), 4 * ((channel&TIMER_CH_MASK)- 1) + 3) = pol;
}
}
/**
* @brief Get a timer's DMA burst length.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @return Number of bytes to be transferred per DMA request, from 1 to 18.
*/
static inline uint8_t timer_dma_get_burst_len(const timer_dev *dev) {
uint32_t dbl = ((dev->regs->DCR) & TIMER_DCR_DBL) >> 8;
return dbl + 1; /* 0 means 1 byte, etc. */
}
/**
* @brief Set a timer's DMA burst length.
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param length DMA burst length; i.e., number of bytes to transfer
* per DMA request, from 1 to 18.
*/
static inline void timer_dma_set_burst_len(const timer_dev *dev, uint8_t length) {
uint32_t tmp = dev->regs->DCR;
tmp &= ~TIMER_DCR_DBL;
tmp |= (length - 1) << 8;
dev->regs->DCR = tmp;
}
/**
* @brief Timer DMA base address.
*
* Defines the base address for DMA transfers.
*/
typedef enum timer_dma_base_addr {
TIMER_DMA_BASE_CR1 = TIMER_DCR_DBA_CR1, /**< Base is control register 1 */
TIMER_DMA_BASE_CR2 = TIMER_DCR_DBA_CR2, /**< Base is control register 2 */
TIMER_DMA_BASE_SMCR = TIMER_DCR_DBA_SMCR, /**< Base is slave mode
control register */
TIMER_DMA_BASE_DIER = TIMER_DCR_DBA_DIER, /**< Base is DMA interrupt enable
register */
TIMER_DMA_BASE_SR = TIMER_DCR_DBA_SR, /**< Base is status register */
TIMER_DMA_BASE_EGR = TIMER_DCR_DBA_EGR, /**< Base is event generation
register */
TIMER_DMA_BASE_CCMR1 = TIMER_DCR_DBA_CCMR1, /**< Base is capture/compare
mode register 1 */
TIMER_DMA_BASE_CCMR2 = TIMER_DCR_DBA_CCMR2, /**< Base is capture/compare
mode register 2 */
TIMER_DMA_BASE_CCER = TIMER_DCR_DBA_CCER, /**< Base is capture/compare
enable register */
TIMER_DMA_BASE_CNT = TIMER_DCR_DBA_CNT, /**< Base is counter */
TIMER_DMA_BASE_PSC = TIMER_DCR_DBA_PSC, /**< Base is prescaler */
TIMER_DMA_BASE_ARR = TIMER_DCR_DBA_ARR, /**< Base is auto-reload
register */
TIMER_DMA_BASE_RCR = TIMER_DCR_DBA_RCR, /**< Base is repetition
counter register */
TIMER_DMA_BASE_CCR1 = TIMER_DCR_DBA_CCR1, /**< Base is capture/compare
register 1 */
TIMER_DMA_BASE_CCR2 = TIMER_DCR_DBA_CCR2, /**< Base is capture/compare
register 2 */
TIMER_DMA_BASE_CCR3 = TIMER_DCR_DBA_CCR3, /**< Base is capture/compare
register 3 */
TIMER_DMA_BASE_CCR4 = TIMER_DCR_DBA_CCR4, /**< Base is capture/compare
register 4 */
TIMER_DMA_BASE_BDTR = TIMER_DCR_DBA_BDTR, /**< Base is break and
dead-time register */
TIMER_DMA_BASE_DCR = TIMER_DCR_DBA_DCR, /**< Base is DMA control
register */
TIMER_DMA_BASE_DMAR = TIMER_DCR_DBA_DMAR /**< Base is DMA address for
full transfer */
} timer_dma_base_addr;
/**
* @brief Get the timer's DMA base address.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @return DMA base address
*/
static inline timer_dma_base_addr timer_dma_get_base_addr(const timer_dev *dev) {
uint32_t dcr = dev->regs->DCR;
return (timer_dma_base_addr)(dcr & TIMER_DCR_DBA);
}
/**
* @brief Set the timer's DMA base address.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param dma_base DMA base address.
*/
static inline void timer_dma_set_base_addr(const timer_dev *dev,
timer_dma_base_addr dma_base) {
uint32_t tmp = dev->regs->DCR;
tmp &= ~TIMER_DCR_DBA;
tmp |= dma_base;
dev->regs->DCR = tmp;
}
/**
* Timer output compare modes.
*/
/**
* @brief Configure a channel's output compare mode.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel to configure in output compare mode.
* @param mode Timer mode to set.
* @param flags OR of timer_oc_mode_flags.
* @see timer_oc_mode
* @see timer_oc_mode_flags
*/
static inline void timer_oc_set_mode(const timer_dev *dev,
timer_Channel _channel,
timer_oc_mode mode,
uint8_t flags) {
uint8_t channel = _channel & TIMER_CH_MASK;
uint8_t bit0 = channel & 1;
uint8_t bit1 = ((channel-1) >> 1) & 1; // fixed
/* channel == 1,2 -> CCMR1; channel == 3,4 -> CCMR2 */
__IO uint16_t *ccmr = &(dev->regs->CCMR1) + bit1*2;
/* channel == 1,3 -> shift = 0, channel == 2,4 -> shift = 8 */
uint8_t shift = 8 * (1 - bit0);
uint16_t tmp = *ccmr;
tmp &= ~(0xFF << shift);
tmp |= (mode | flags | TIMER_CCMR_CCS_OUTPUT) << shift;
*ccmr = tmp;
}
/**
* @brief Configure a channel's input capture mode.
*
* @param dev Timer device, must have type TIMER_ADVANCED or TIMER_GENERAL.
* @param channel Channel to configure in input capture mode.
* @param mode Timer mode to set.
* @param flags OR of timer_ic_mode_flags.
* @see timer_ic_mode
* @see timer_ic_mode_flags
*/
static inline void timer_ic_set_mode(const timer_dev *dev,
timer_Channel _channel,
uint8_t mode,
uint16_t filter) {
uint8_t channel = _channel & TIMER_CH_MASK;
uint8_t bit0 = channel & 1;
uint8_t bit1 = ((channel-1) >> 1) & 1; // fixed
/* channel == 1,2 -> CCMR1; channel == 3,4 -> CCMR2 */
__IO uint16_t *ccmr = &(dev->regs->CCMR1) + bit1*2;
/* channel == 1,3 -> shift = 0, channel == 2,4 -> shift = 8 */
uint8_t shift = 8 * (1 - bit0);
uint16_t tmp = *ccmr;
tmp &= ~(0xFF << shift);
tmp |= (mode | (filter << 4) ) << shift;
*ccmr = tmp;
}
/**
* @brief Enable a timer interrupt.
* @param dev Timer device.
* @param interrupt Interrupt number to enable; this may be any
* timer_interrupt_id value appropriate for the timer.
* @see timer_interrupt_id
* @see timer_channel
*/
static inline void timer_enable_irq(const timer_dev *dev, timer_interrupt_id interrupt) {
// *bb_perip(&(dev->regs->DIER), interrupt) = 1;
dev->regs->DIER |= 1<<(interrupt & TIMER_CH_MASK);
}
/**
* @brief Disable a timer interrupt.
* @param dev Timer device.
* @param interrupt Interrupt number to disable; this may be any
* timer_interrupt_id value appropriate for the timer.
* @see timer_interrupt_id
* @see timer_channel
*/
static inline void timer_disable_irq(const timer_dev *dev, timer_interrupt_id interrupt) {
// *bb_perip(&(dev->regs->DIER), interrupt) = 0;
dev->regs->DIER &= ~(1<<(interrupt & TIMER_CH_MASK));
}
#ifdef __cplusplus
}
#endif
#endif