You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
254 lines
6.8 KiB
254 lines
6.8 KiB
/* |
|
www.ArduCopter.com - www.DIYDrones.com |
|
Copyright (c) 2010. All rights reserved. |
|
An Open Source Arduino based multicopter. |
|
|
|
File : UserDefines.pde |
|
Version : v1.0, Aug 27, 2010 |
|
Author(s): ArduCopter Team |
|
Ted Carancho (aeroquad), Jose Julio, Jordi Muñoz, |
|
Jani Hirvinen, Ken McEwans, Roberto Navoni, |
|
Sandro Benigno, Chris Anderson |
|
|
|
This program is free software: you can redistribute it and/or modify |
|
it under the terms of the GNU General Public License as published by |
|
the Free Software Foundation, either version 3 of the License, or |
|
(at your option) any later version. |
|
|
|
This program is distributed in the hope that it will be useful, |
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
GNU General Public License for more details. |
|
|
|
You should have received a copy of the GNU General Public License |
|
along with this program. If not, see <http://www.gnu.org/licenses/>. |
|
|
|
* ************************************************************** * |
|
ChangeLog: |
|
|
|
|
|
* ************************************************************** * |
|
TODO: |
|
|
|
|
|
* ************************************************************** */ |
|
|
|
|
|
/*************************************************************/ |
|
// Safety & Security |
|
|
|
// Arm & Disarm delays |
|
#define ARM_DELAY 200 // milliseconds of how long you need to keep rudder to max right for arming motors |
|
#define DISARM_DELAY 100 // milliseconds of how long you need to keep rudder to max left for disarming motors |
|
|
|
|
|
/*************************************************************/ |
|
// AM Mode & Flight information |
|
|
|
/* AM PIN Definitions */ |
|
/* Will be moved in future to AN extension ports */ |
|
/* due need to have PWM pins free for sonars and servos */ |
|
|
|
#define FR_LED 3 // Mega PE4 pin, OUT7 |
|
#define RE_LED 2 // Mega PE5 pin, OUT6 |
|
#define RI_LED 7 // Mega PH4 pin, OUT5 |
|
#define LE_LED 8 // Mega PH5 pin, OUT4 |
|
|
|
/* AM PIN Definitions - END */ |
|
|
|
|
|
/*************************************************************/ |
|
// Radio related definitions |
|
|
|
// If you don't know these values, you can activate RADIO_TEST_MODE below |
|
// and check your mid values |
|
|
|
//#define RADIO_TEST_MODE |
|
|
|
#define ROLL_MID 1500 // Radio Roll channel mid value |
|
#define PITCH_MID 1500 // Radio Pitch channel mid value |
|
#define YAW_MID 1500 // Radio Yaw channel mid value |
|
#define THROTTLE_MID 1505 // Radio Throttle channel mid value |
|
#define AUX_MID 1500 |
|
|
|
#define CHANN_CENTER 1500 // Channel center, legacy |
|
#define MIN_THROTTLE 1040 // Throttle pulse width at minimun... |
|
|
|
// Following variables stored in EEPROM |
|
float KP_QUAD_ROLL; |
|
float KI_QUAD_ROLL; |
|
float KD_QUAD_ROLL; |
|
float KP_QUAD_PITCH; |
|
float KI_QUAD_PITCH; |
|
float KD_QUAD_PITCH; |
|
float KP_QUAD_YAW; |
|
float KI_QUAD_YAW; |
|
float KD_QUAD_YAW; |
|
float STABLE_MODE_KP_RATE; |
|
float KP_GPS_ROLL; |
|
float KI_GPS_ROLL; |
|
float KD_GPS_ROLL; |
|
float KP_GPS_PITCH; |
|
float KI_GPS_PITCH; |
|
float KD_GPS_PITCH; |
|
float GPS_MAX_ANGLE; |
|
float KP_ALTITUDE; |
|
float KI_ALTITUDE; |
|
float KD_ALTITUDE; |
|
int acc_offset_x; |
|
int acc_offset_y; |
|
int acc_offset_z; |
|
int gyro_offset_roll; |
|
int gyro_offset_pitch; |
|
int gyro_offset_yaw; |
|
float Kp_ROLLPITCH; |
|
float Ki_ROLLPITCH; |
|
float Kp_YAW; |
|
float Ki_YAW; |
|
float GEOG_CORRECTION_FACTOR; |
|
int MAGNETOMETER; |
|
float Kp_RateRoll; |
|
float Ki_RateRoll; |
|
float Kd_RateRoll; |
|
float Kp_RatePitch; |
|
float Ki_RatePitch; |
|
float Kd_RatePitch; |
|
float Kp_RateYaw; |
|
float Ki_RateYaw; |
|
float Kd_RateYaw; |
|
float xmitFactor; |
|
float ch_roll_slope = 1; |
|
float ch_pitch_slope = 1; |
|
float ch_throttle_slope = 1; |
|
float ch_yaw_slope = 1; |
|
float ch_aux_slope = 1; |
|
float ch_aux2_slope = 1; |
|
float ch_roll_offset = 0; |
|
float ch_pitch_offset = 0; |
|
float ch_throttle_offset = 0; |
|
float ch_yaw_offset = 0; |
|
float ch_aux_offset = 0; |
|
float ch_aux2_offset = 0; |
|
|
|
// This function call contains the default values that are set to the ArduCopter |
|
// when a "Default EEPROM Value" command is sent through serial interface |
|
void defaultUserConfig() { |
|
KP_QUAD_ROLL = 1.8; |
|
KI_QUAD_ROLL = 0.30; //0.4 |
|
KD_QUAD_ROLL = 0.4; //0.48 |
|
KP_QUAD_PITCH = 1.8; |
|
KI_QUAD_PITCH = 0.30; //0.4 |
|
KD_QUAD_PITCH = 0.4; //0.48 |
|
KP_QUAD_YAW = 3.6; |
|
KI_QUAD_YAW = 0.15; |
|
KD_QUAD_YAW = 1.2; |
|
STABLE_MODE_KP_RATE = 0.2; // New param for stable mode |
|
KP_GPS_ROLL = 0.02; |
|
KI_GPS_ROLL = 0.008; |
|
KD_GPS_ROLL = 0.006; |
|
KP_GPS_PITCH = 0.02; |
|
KI_GPS_PITCH = 0.008; |
|
KD_GPS_PITCH = 0.006; |
|
GPS_MAX_ANGLE = 18; |
|
KP_ALTITUDE = 0.8; |
|
KI_ALTITUDE = 0.2; |
|
KD_ALTITUDE = 0.2; |
|
acc_offset_x = 2073; |
|
acc_offset_y = 2056; |
|
acc_offset_z = 2010; |
|
gyro_offset_roll = 1659; |
|
gyro_offset_pitch = 1618; |
|
gyro_offset_yaw = 1673; |
|
Kp_ROLLPITCH = 0.0014; |
|
Ki_ROLLPITCH = 0.00000015; |
|
Kp_YAW = 1.2; |
|
Ki_YAW = 0.00005; |
|
GEOG_CORRECTION_FACTOR = 0.87; |
|
MAGNETOMETER = 0; |
|
Kp_RateRoll = 0.6; |
|
Ki_RateRoll = 0.1; |
|
Kd_RateRoll = -0.8; |
|
Kp_RatePitch = 0.6; |
|
Ki_RatePitch = 0.1; |
|
Kd_RatePitch = -0.8; |
|
Kp_RateYaw = 1.6; |
|
Ki_RateYaw = 0.3; |
|
Kd_RateYaw = 0; |
|
xmitFactor = 0.8; |
|
roll_mid = 1500; |
|
pitch_mid = 1500; |
|
yaw_mid = 1500; |
|
ch_roll_slope = 1; |
|
ch_pitch_slope = 1; |
|
ch_throttle_slope = 1; |
|
ch_yaw_slope = 1; |
|
ch_aux_slope = 1; |
|
ch_aux2_slope = 1; |
|
ch_roll_offset = 0; |
|
ch_pitch_offset = 0; |
|
ch_throttle_offset = 0; |
|
ch_yaw_offset = 0; |
|
ch_aux_offset = 0; |
|
ch_aux2_offset = 0; |
|
} |
|
|
|
// EEPROM storage addresses |
|
#define KP_QUAD_ROLL_ADR 0 |
|
#define KI_QUAD_ROLL_ADR 8 |
|
#define KD_QUAD_ROLL_ADR 4 |
|
#define KP_QUAD_PITCH_ADR 12 |
|
#define KI_QUAD_PITCH_ADR 20 |
|
#define KD_QUAD_PITCH_ADR 16 |
|
#define KP_QUAD_YAW_ADR 24 |
|
#define KI_QUAD_YAW_ADR 32 |
|
#define KD_QUAD_YAW_ADR 28 |
|
#define STABLE_MODE_KP_RATE_ADR 36 |
|
#define KP_GPS_ROLL_ADR 40 |
|
#define KI_GPS_ROLL_ADR 48 |
|
#define KD_GPS_ROLL_ADR 44 |
|
#define KP_GPS_PITCH_ADR 52 |
|
#define KI_GPS_PITCH_ADR 60 |
|
#define KD_GPS_PITCH_ADR 56 |
|
#define GPS_MAX_ANGLE_ADR 64 |
|
#define KP_ALTITUDE_ADR 68 |
|
#define KI_ALTITUDE_ADR 76 |
|
#define KD_ALTITUDE_ADR 72 |
|
#define acc_offset_x_ADR 80 |
|
#define acc_offset_y_ADR 84 |
|
#define acc_offset_z_ADR 88 |
|
#define gyro_offset_roll_ADR 92 |
|
#define gyro_offset_pitch_ADR 96 |
|
#define gyro_offset_yaw_ADR 100 |
|
#define Kp_ROLLPITCH_ADR 104 |
|
#define Ki_ROLLPITCH_ADR 108 |
|
#define Kp_YAW_ADR 112 |
|
#define Ki_YAW_ADR 116 |
|
#define GEOG_CORRECTION_FACTOR_ADR 120 |
|
#define MAGNETOMETER_ADR 124 |
|
#define XMITFACTOR_ADR 128 |
|
#define KP_RATEROLL_ADR 132 |
|
#define KI_RATEROLL_ADR 136 |
|
#define KD_RATEROLL_ADR 140 |
|
#define KP_RATEPITCH_ADR 144 |
|
#define KI_RATEPITCH_ADR 148 |
|
#define KD_RATEPITCH_ADR 152 |
|
#define KP_RATEYAW_ADR 156 |
|
#define KI_RATEYAW_ADR 160 |
|
#define KD_RATEYAW_ADR 164 |
|
#define CHROLL_MID 168 |
|
#define CHPITCH_MID 172 |
|
#define CHYAW_MID 176 |
|
#define ch_roll_slope_ADR 180 |
|
#define ch_pitch_slope_ADR 184 |
|
#define ch_throttle_slope_ADR 188 |
|
#define ch_yaw_slope_ADR 192 |
|
#define ch_aux_slope_ADR 196 |
|
#define ch_aux2_slope_ADR 200 |
|
#define ch_roll_offset_ADR 204 |
|
#define ch_pitch_offset_ADR 208 |
|
#define ch_throttle_offset_ADR 212 |
|
#define ch_yaw_offset_ADR 216 |
|
#define ch_aux_offset_ADR 220 |
|
#define ch_aux2_offset_ADR 224 |
|
|
|
|
|
|