You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
1.4 KiB
52 lines
1.4 KiB
/******************************************* |
|
* Sample sketch that configures an HMC5883L 3 axis |
|
* magnetometer to continuous mode and reads back |
|
* the three axis of data. |
|
*******************************************/ |
|
|
|
#include <AP_Common/AP_Common.h> |
|
#include <AP_Math/AP_Math.h> |
|
#include <AP_Param/AP_Param.h> |
|
#include <AP_Progmem/AP_Progmem.h> |
|
|
|
#include <AP_HAL/AP_HAL.h> |
|
#include <AP_HAL_FLYMAPLE/AP_HAL_FLYMAPLE.h> |
|
|
|
const AP_HAL::HAL& hal = AP_HAL_BOARD_DRIVER; |
|
|
|
#define HMC5883L 0x1E |
|
|
|
void setup() { |
|
hal.console->printf_P(PSTR("Initializing HMC5883L at address %x\r\n"), |
|
HMC5883L); |
|
|
|
uint8_t stat = hal.i2c->writeRegister(HMC5883L,0x02,0x00); |
|
if (stat == 0) { |
|
hal.console->printf_P(PSTR("successful init\r\n")); |
|
} else { |
|
hal.console->printf_P(PSTR("failed init: return status %d\r\n"), |
|
(int)stat); |
|
for(;;); |
|
} |
|
} |
|
|
|
void loop() { |
|
uint8_t data[6]; |
|
//read 6 bytes (x,y,z) from the device |
|
uint8_t stat = hal.i2c->readRegisters(HMC5883L,0x03,6, data); |
|
|
|
if (stat == 0){ |
|
int x, y, z; |
|
x = data[0] << 8; |
|
x |= data[1]; |
|
y = data[2] << 8; |
|
y |= data[3]; |
|
z = data[4] << 8; |
|
z |= data[5]; |
|
hal.console->printf_P(PSTR("x: %d y: %d z: %d \r\n"), x, y, z); |
|
} else { |
|
hal.console->printf_P(PSTR("i2c error: status %d\r\n"), (int)stat); |
|
} |
|
} |
|
|
|
AP_HAL_MAIN();
|
|
|