| .. |
|
AC_AttitudeControl
|
AC_AttitudeControl: removed use of "blended" earth frame accel
|
3 years ago |
|
AC_AutoTune
|
AC_AutoTune: params always use set method
|
3 years ago |
|
AC_Autorotation
|
AC_Autorotation: params always use set method
|
3 years ago |
|
AC_Avoidance
|
AC_Avoidance: params always use set method
|
3 years ago |
|
AC_Fence
|
AC_Fence: add options param on plane
|
3 years ago |
|
AC_InputManager
|
AC_InputManager: params always use set method
|
3 years ago |
|
AC_PID
|
AC_PID: params always use set method
|
3 years ago |
|
AC_PrecLand
|
AC_PrecLand: return target distance if enabled from SIM_Precland
|
3 years ago |
|
AC_Sprayer
|
AC_Sprayer: use vector.xy().length() instead of norm(x,y)
|
3 years ago |
|
AC_WPNav
|
AC_WPNav: correct metadata in libraries failing checks on emitter
|
3 years ago |
|
APM_Control
|
APM_Control: removed use of "blended" earth frame accel
|
3 years ago |
|
AP_ADC
|
AP_ADC: Console output can be disabled
|
3 years ago |
|
AP_ADSB
|
AP_ADSB: correct metadata in libraries failing checks on emitter
|
3 years ago |
|
AP_AHRS
|
AP_AHRS: removed use of "blended" accel values
|
3 years ago |
|
AP_AIS
|
AP_AIS: include GCS_MAVLink.h
|
3 years ago |
|
AP_AccelCal
|
AP_AccelCal: limit COMMAND_ACKs accepted for vehicle pose confirmation
|
3 years ago |
|
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers
|
3 years ago |
|
AP_Airspeed
|
AP_Airspeed: correct metadata in libraries failing checks on emitter
|
3 years ago |
|
AP_Arming
|
AP_Arming: shift pre-arm check to AP_Proximity
|
2 years ago |
|
AP_Avoidance
|
AP_Avoidance: params always use set method
|
3 years ago |
|
AP_BLHeli
|
AP_BLHeli: make ESC debug easier to see
|
3 years ago |
|
AP_Baro
|
AP_Baro: params always use set method
|
3 years ago |
|
AP_BattMonitor
|
AP_BattMonitor: Add macros for Fuel options
|
3 years ago |
|
AP_Beacon
|
AP_Beacon: params always use set method
|
3 years ago |
|
AP_BoardConfig
|
AP_BoardConfig: params always use set method
|
3 years ago |
|
AP_Button
|
AP_Button: pre-arm displays gpio vs servo_ch conflict
|
3 years ago |
|
AP_CANManager
|
AP_CANManager: added scripting2 protocol
|
3 years ago |
|
AP_Camera
|
AP_Camera: params always use set method
|
3 years ago |
|
AP_CheckFirmware
|
AP_CheckFirmware: added library for checking firmware ID and CRC
|
3 years ago |
|
AP_Common
|
AP_Common: correct gtests
|
3 years ago |
|
AP_Compass
|
AP_Compass: params always use set method
|
3 years ago |
|
AP_CustomRotations
|
AP_CustomRotations: fix param refrencing
|
3 years ago |
|
AP_DAL
|
AP_DAL: added set source events for EKF3
|
3 years ago |
|
AP_Declination
|
AP_Declination: avoid undefined floating point exceptions on macOS when using implicit casts
|
2 years ago |
|
AP_Devo_Telem
|
AP_Devo_Telem: rename AP_AHRS::get_position to get_location
|
3 years ago |
|
AP_EFI
|
AP_EFI: prevent flood of Lutan serial port
|
3 years ago |
|
AP_ESC_Telem
|
AP_ESC_Telem: don't default ESC telem on for AP_Periph
|
2 years ago |
|
AP_ExternalAHRS
|
AP_ExternalAHRS: stop using GCS_MAVLINK.h in header files
|
3 years ago |
|
AP_FETtecOneWire
|
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
|
3 years ago |
|
AP_Filesystem
|
AP_Filesystem: rename HAL_MISSION_ENABLED to AP_MISSION_ENABLED
|
3 years ago |
|
AP_FlashIface
|
AP_FlashIface: fix examples
|
3 years ago |
|
AP_FlashStorage
|
AP_FlashStorage: support L496 MCUs
|
3 years ago |
|
AP_Follow
|
AP_Follow: vector params always use set method
|
3 years ago |
|
AP_Frsky_Telem
|
AP_Frsky_Telem: change AC_FENCE to AP_FENCE_ENABLED
|
3 years ago |
|
AP_GPS
|
AP_GPS: fixed handling of DroneCAN GPS without vertical velocity
|
2 years ago |
|
AP_Generator
|
AP_Generator: add AP_GENERATOR_RICHENPOWER_ENABLED
|
3 years ago |
|
AP_Gripper
|
AP_Gripper: apply auto close to all backends.
|
3 years ago |
|
AP_GyroFFT
|
AP_GyroFFT: params always use set method
|
3 years ago |
|
AP_HAL
|
AP_HAL: do not gate AP_CRASHDUMP_ENABLED on bootloader
|
3 years ago |
|
AP_HAL_ChibiOS
|
AP_HAL_ChibiOS: disable RCIN and RCOUT threads on HiTec-Airspeed
|
2 years ago |
|
AP_HAL_ESP32
|
AP_HAL_ESP32: more changes for 32 bit servo mask
|
3 years ago |
|
AP_HAL_Empty
|
AP_HAL_Empty: move implementations of functions to header
|
3 years ago |
|
AP_HAL_Linux
|
AP_HAL_Linux: more changes for 32 bit servo mask
|
3 years ago |
|
AP_HAL_SITL
|
AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
|
3 years ago |
|
AP_Hott_Telem
|
AP_Hott_Telem: Console output can be disabled
|
3 years ago |
|
AP_ICEngine
|
AP_ICEngine: add and use AP_ICENGINE_ENABLE
|
3 years ago |
|
AP_IOMCU
|
AP_IOMCU: Console output can be disabled
|
3 years ago |
|
AP_IRLock
|
AP_IRLock: correct spelling mili -> milli
|
3 years ago |
|
AP_InertialNav
|
AP_InertialNav: nfc, fix to say relative to EKF origin
|
3 years ago |
|
AP_InertialSensor
|
AP_InertialSensor: correct INS_generic example
|
3 years ago |
|
AP_InternalError
|
AP_InternalError: change panic to return error code as string in SITL
|
3 years ago |
|
AP_JSButton
|
AP_JSButton: Add servo toggle button function
|
7 years ago |
|
AP_KDECAN
|
AP_KDECAN: more changes for 32 bit servo mask
|
3 years ago |
|
AP_L1_Control
|
AP_L1_Control: use AP_GROUPINFO instead of AP_GROUPINFO_FRAME
|
3 years ago |
|
AP_LTM_Telem
|
AP_LTM_Telem: add AP_LTM_TELEM_ENABLED
|
3 years ago |
|
AP_Landing
|
AP_Landing: change logging to be designated as streaming
|
3 years ago |
|
AP_LandingGear
|
AP_LandingGear: SITL: only set defualts is SITL pin is set avoiding enable via param conversion
|
3 years ago |
|
AP_LeakDetector
|
AP_LeakDetector: check for valid analog pin
|
3 years ago |
|
AP_Logger
|
AP_Logger: rename HAL_MISSION_ENABLED to AP_MISSION_ENABLED
|
3 years ago |
|
AP_MSP
|
AP_MSP: rename OpticalFlow class to AP_OpticalFlow
|
3 years ago |
|
AP_Math
|
AP_Math: add dignostic message for SCurve internal error
|
3 years ago |
|
AP_Menu
|
…
|
|
|
AP_Mission
|
AP_Mission: add AP_Mission_config.h
|
3 years ago |
|
AP_Module
|
AP_Module: correct ModuleTest example for lack of GCS object
|
3 years ago |
|
AP_Motors
|
AP_Motors: refactor to allow frame type symbols to be created for ELF
|
3 years ago |
|
AP_Mount
|
AP_Mount: send warning to GCS on invalid GPS or angle targets
|
2 years ago |
|
AP_NMEA_Output
|
AP_NMEA_Output: use a fixed maximum number of NMEA outputs
|
3 years ago |
|
AP_NavEKF
|
AP_NavEKF: added a getter function for active source set
|
3 years ago |
|
AP_NavEKF2
|
AP_NavEKF2: stop using GCS_MAVLINK.h in header files
|
3 years ago |
|
AP_NavEKF3
|
AP_NavEKF3: store and use lastKnownPositionD
|
2 years ago |
|
AP_Navigation
|
AP_Navigation: make crosstrack_error_integrator pure virtual as nobody use the base class
|
4 years ago |
|
AP_Notify
|
AP_Notify: tidy includes
|
3 years ago |
|
AP_OLC
|
AP_OLC: tidy includes
|
3 years ago |
|
AP_ONVIF
|
AP_ONVIF: fix executable permission and trailing whitespace
|
3 years ago |
|
AP_OSD
|
AP_OSD: add required include
|
3 years ago |
|
AP_OpenDroneID
|
AP_OpenDroneID: fixed cpp check for cygwin
|
2 years ago |
|
AP_OpticalFlow
|
AP_OpticalFlow: allow use of OpticalFlow on SimOnHardWare
|
2 years ago |
|
AP_Parachute
|
AP_Parachute: params always use set method
|
3 years ago |
|
AP_Param
|
AP_Param: remove AP_ParamV `=` operator
|
3 years ago |
|
AP_PiccoloCAN
|
AP_PiccoloCAN: params always use set method
|
3 years ago |
|
AP_Proximity
|
AP_Proximity: Fix comments
|
2 years ago |
|
AP_RAMTRON
|
AP_RAMTRON: reduce scope for WITH_SEMAPHORE
|
3 years ago |
|
AP_RCMapper
|
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
|
3 years ago |
|
AP_RCProtocol
|
AP_RCProtocol: fix examples
|
3 years ago |
|
AP_RCTelemetry
|
AP_RCTelemetry: don't spam mode changes on CRSF startup
|
3 years ago |
|
AP_ROMFS
|
AP_ROMFS: tidy includes
|
3 years ago |
|
AP_RPM
|
AP_RPM: fixed use of configured() vs configured_in_storage()
|
3 years ago |
|
AP_RSSI
|
AP_RSSI: convert floating point divides into multiplys
|
3 years ago |
|
AP_RTC
|
AP_RTC: fix oldest_acceptable_date to be in micros
|
3 years ago |
|
AP_Radio
|
AP_Radio: Console output can be disabled
|
3 years ago |
|
AP_Rally
|
AP_Rally: tidy creation of Location from RallyLocation
|
3 years ago |
|
AP_RangeFinder
|
AP_RangeFinder:add support for RDS02UF radar driver on serial
|
2 years ago |
|
AP_Relay
|
AP_Relay:Prevent operation for sim-on-hardware,add logs
|
3 years ago |
|
AP_RobotisServo
|
AP_RobotisServo: disable with minmimize features and 1mb flash
|
3 years ago |
|
AP_SBusOut
|
AP_SBusOut: fix includes place and order
|
6 years ago |
|
AP_Scheduler
|
AP_Scheduler: fix examples
|
3 years ago |
|
AP_Scripting
|
AP_Scripting: VTOL-quiktune add back param for AUTO_FILTER
|
2 years ago |
|
AP_SerialLED
|
AP_SerialLED: enable 32 servo outs
|
3 years ago |
|
AP_SerialManager
|
AP_SerialManager: generalize EFI serial protocol name
|
2 years ago |
|
AP_ServoRelayEvents
|
…
|
|
|
AP_SmartRTL
|
AP_SmartRTL: params always use set method
|
3 years ago |
|
AP_Soaring
|
AP_Soaring: make function const
|
3 years ago |
|
AP_Stats
|
AP_Stats: Add missing const in member functions
|
4 years ago |
|
AP_TECS
|
AP_TECS: use TECS log bitmask in constructor
|
3 years ago |
|
AP_TempCalibration
|
AP_TempCalibration: Remove pointer check before delete
|
4 years ago |
|
AP_TemperatureSensor
|
AP_TemperatureSensor: Add missing const in member functions
|
4 years ago |
|
AP_Terrain
|
AP_Terrain: rename HAL_MISSION_ENABLED to AP_MISSION_ENABLED
|
3 years ago |
|
AP_Torqeedo
|
AP_Torqeedo : correct comment spelling
|
3 years ago |
|
AP_Tuning
|
AP_Tuning: tidy includes
|
3 years ago |
|
AP_UAVCAN
|
AP_UAVCAN: support OpenDroneID
|
3 years ago |
|
AP_Vehicle
|
AP_Vehicle: move call to compass cal update up to AP_Vehicle
|
3 years ago |
|
AP_VideoTX
|
AP_VideoTX: params always use set method
|
3 years ago |
|
AP_VisualOdom
|
AP_VisualOdom: only include log structure if enabled
|
3 years ago |
|
AP_Volz_Protocol
|
AP_Volz: disable with minmimize features
|
3 years ago |
|
AP_WheelEncoder
|
AP_WheelEncoder: fix WheelEncoder_Quadrature timestamp.
|
3 years ago |
|
AP_Winch
|
AP_Winch: stop libraries including AP_Logger.h in .h files
|
3 years ago |
|
AP_WindVane
|
AP_WindVane: params always use set method
|
3 years ago |
|
AR_Motors
|
AR_Motors: remove arming check to allow ackerman and skid-steering
|
2 years ago |
|
AR_WPNav
|
AR_WPNav: stop libraries including AP_Logger.h in .h files
|
3 years ago |
|
Filter
|
Filter: params always use set method
|
3 years ago |
|
GCS_MAVLink
|
GCS_MAVLink: MOUNT_CONFIGURE and MOUNT_CONTROL send deprecation warnings
|
2 years ago |
|
PID
|
PID: params always use set method
|
3 years ago |
|
RC_Channel
|
RC_Channel: add ARM/MOTOR_EMERGENCY_STOP Aux Switch
|
2 years ago |
|
SITL
|
SITL: integrate PRX parameter rename
|
2 years ago |
|
SRV_Channel
|
SRV_Channel: add ARM/MOTOR_EMERGENCY_STOP Aux Switch
|
2 years ago |
|
StorageManager
|
StorageManager: fix write_block() comment
|
3 years ago |
|
doc
|
…
|
|
Zebulon
e83c3ccd30