You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
627 lines
18 KiB
627 lines
18 KiB
# ---------------------------------------------------------------------------- |
|
# Makefile to compile and link stk500boot bootloader |
|
# Author: Peter Fleury |
|
# File: $Id: Makefile,v 1.3 2006/03/04 19:26:17 peter Exp $ |
|
# based on WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
# |
|
# Adjust F_CPU below to the clock frequency in Mhz of your AVR target |
|
# Adjust BOOTLOADER_ADDRESS to your AVR target |
|
# |
|
#---------------------------------------------------------------------------- |
|
# On command line: |
|
# |
|
# make all = Make software. |
|
# |
|
# make clean = Clean out built project files. |
|
# |
|
# make coff = Convert ELF to AVR COFF. |
|
# |
|
# make extcoff = Convert ELF to AVR Extended COFF. |
|
# |
|
# make program = Download the hex file to the device, using avrdude. |
|
# Please customize the avrdude settings below first! |
|
# |
|
# make debug = Start either simulavr or avarice as specified for debugging, |
|
# with avr-gdb or avr-insight as the front end for debugging. |
|
# |
|
# make filename.s = Just compile filename.c into the assembler code only. |
|
# |
|
# make filename.i = Create a preprocessed source file for use in submitting |
|
# bug reports to the GCC project. |
|
# |
|
# To rebuild project do "make clean" then "make all". |
|
#---------------------------------------------------------------------------- |
|
# <MLS> = Mark Sproul msproul-at-skychariot.com |
|
|
|
|
|
# MCU name |
|
#MCU = atmega128 |
|
|
|
|
|
# Processor frequency. |
|
# This will define a symbol, F_CPU, in all source code files equal to the |
|
# processor frequency. You can then use this symbol in your source code to |
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
# automatically to create a 32-bit value in your source code. |
|
#F_CPU = 16000000 |
|
|
|
|
|
# Bootloader |
|
# Please adjust if using a different AVR |
|
# 0x0e00*2=0x1C00 for ATmega8 512 words Boot Size |
|
# 0xFC00*2=0x1F800 for ATmega128 1024 words Boot Size |
|
# 0xF800*2=0x1F000 for ATmega1280 |
|
# 0xF000*2=0x1E000 for ATmega1280 |
|
#BOOTLOADER_ADDRESS = 1E000 |
|
|
|
|
|
# Output format. (can be srec, ihex, binary) |
|
FORMAT = ihex |
|
|
|
|
|
# Target file name (without extension). |
|
TARGET = stk500boot |
|
|
|
|
|
# List C source files here. (C dependencies are automatically generated.) |
|
SRC = stk500boot.c |
|
|
|
|
|
# List Assembler source files here. |
|
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
# will not be considered source files but generated files (assembler |
|
# output from the compiler), and will be deleted upon "make clean"! |
|
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
# it will preserve the spelling of the filenames, and gcc itself does |
|
# care about how the name is spelled on its command-line. |
|
ASRC = |
|
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s]. |
|
# 0 = turn off optimization. s = optimize for size. |
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
OPT = s |
|
|
|
|
|
# Debugging format. |
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
# AVR Studio 4.10 requires dwarf-2. |
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
DEBUG = dwarf-2 |
|
|
|
|
|
# List any extra directories to look for include files here. |
|
# Each directory must be separated by a space. |
|
# Use forward slashes for directory separators. |
|
# For a directory that has spaces, enclose it in quotes. |
|
EXTRAINCDIRS = |
|
|
|
|
|
# Compiler flag to set the C Standard level. |
|
# c89 = "ANSI" C |
|
# gnu89 = c89 plus GCC extensions |
|
# c99 = ISO C99 standard (not yet fully implemented) |
|
# gnu99 = c99 plus GCC extensions |
|
CSTANDARD = -std=gnu99 |
|
|
|
|
|
# Place -D or -U options here |
|
CDEFS = -DF_CPU=$(F_CPU)UL |
|
|
|
|
|
# Place -I options here |
|
CINCS = |
|
|
|
|
|
|
|
#---------------- Compiler Options ---------------- |
|
# -g*: generate debugging information |
|
# -O*: optimization level |
|
# -f...: tuning, see GCC manual and avr-libc documentation |
|
# -Wall...: warning level |
|
# -Wa,...: tell GCC to pass this to the assembler. |
|
# -adhlns...: create assembler listing |
|
CFLAGS = -g$(DEBUG) |
|
CFLAGS += $(CDEFS) $(CINCS) |
|
CFLAGS += -O$(OPT) |
|
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -mno-tablejump |
|
CFLAGS += -Wall -Wstrict-prototypes |
|
CFLAGS += -Wa,-adhlns=$(<:.c=.lst) |
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
CFLAGS += $(CSTANDARD) |
|
|
|
|
|
#---------------- Assembler Options ---------------- |
|
# -Wa,...: tell GCC to pass this to the assembler. |
|
# -ahlms: create listing |
|
# -gstabs: have the assembler create line number information; note that |
|
# for use in COFF files, additional information about filenames |
|
# and function names needs to be present in the assembler source |
|
# files -- see avr-libc docs [FIXME: not yet described there] |
|
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs |
|
|
|
|
|
#---------------- Library Options ---------------- |
|
# Minimalistic printf version |
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
|
|
# Floating point printf version (requires MATH_LIB = -lm below) |
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
|
|
# If this is left blank, then it will use the Standard printf version. |
|
PRINTF_LIB = |
|
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
|
|
|
|
# Minimalistic scanf version |
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
|
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
|
|
# If this is left blank, then it will use the Standard scanf version. |
|
SCANF_LIB = |
|
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
|
|
|
|
MATH_LIB = -lm |
|
|
|
|
|
|
|
#---------------- External Memory Options ---------------- |
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
# used for variables (.data/.bss) and heap (malloc()). |
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
# only used for heap (malloc()). |
|
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff |
|
|
|
EXTMEMOPTS = |
|
|
|
|
|
|
|
|
|
#---------------- Linker Options ---------------- |
|
# -Wl,...: tell GCC to pass this to linker. |
|
# -Map: create map file |
|
# --cref: add cross reference to map file |
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
LDFLAGS += $(EXTMEMOPTS) |
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
|
|
|
|
#--------------- bootloader linker Options ------- |
|
# BOOTLOADER_ADDRESS (=Start of Boot Loader section |
|
# in bytes - not words) is defined above. |
|
#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -nodefaultlibs |
|
#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles |
|
LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) |
|
|
|
#---------------- Programming Options (avrdude) ---------------- |
|
|
|
# Programming hardware: alf avr910 avrisp bascom bsd |
|
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 |
|
# |
|
# Type: avrdude -c ? |
|
# to get a full listing. |
|
# |
|
AVRDUDE_PROGRAMMER = stk500v2 |
|
|
|
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
AVRDUDE_PORT = com1 # programmer connected to serial device |
|
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
|
|
|
|
# Uncomment the following if you want avrdude's erase cycle counter. |
|
# Note that this counter needs to be initialized first using -Yn, |
|
# see avrdude manual. |
|
#AVRDUDE_ERASE_COUNTER = -y |
|
|
|
# Uncomment the following if you do /not/ wish a verification to be |
|
# performed after programming the device. |
|
#AVRDUDE_NO_VERIFY = -V |
|
|
|
# Increase verbosity level. Please use this when submitting bug |
|
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
# to submit bug reports. |
|
#AVRDUDE_VERBOSE = -v -v |
|
|
|
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
|
|
|
|
|
|
#---------------- Debugging Options ---------------- |
|
|
|
# For simulavr only - target MCU frequency. |
|
DEBUG_MFREQ = $(F_CPU) |
|
|
|
# Set the DEBUG_UI to either gdb or insight. |
|
# DEBUG_UI = gdb |
|
DEBUG_UI = insight |
|
|
|
# Set the debugging back-end to either avarice, simulavr. |
|
DEBUG_BACKEND = avarice |
|
#DEBUG_BACKEND = simulavr |
|
|
|
# GDB Init Filename. |
|
GDBINIT_FILE = __avr_gdbinit |
|
|
|
# When using avarice settings for the JTAG |
|
JTAG_DEV = /dev/com1 |
|
|
|
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
DEBUG_PORT = 4242 |
|
|
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
# just set to localhost unless doing some sort of crazy debugging when |
|
# avarice is running on a different computer. |
|
DEBUG_HOST = localhost |
|
|
|
|
|
|
|
#============================================================================ |
|
|
|
|
|
# Define programs and commands. |
|
SHELL = sh |
|
CC = avr-gcc |
|
OBJCOPY = avr-objcopy |
|
OBJDUMP = avr-objdump |
|
SIZE = avr-size |
|
NM = avr-nm |
|
AVRDUDE = avrdude |
|
REMOVE = rm -f |
|
COPY = cp |
|
WINSHELL = cmd |
|
|
|
|
|
# Define Messages |
|
# English |
|
MSG_ERRORS_NONE = Errors: none |
|
MSG_BEGIN = -------- begin -------- |
|
MSG_END = -------- end -------- |
|
MSG_SIZE_BEFORE = Size before: |
|
MSG_SIZE_AFTER = Size after: |
|
MSG_COFF = Converting to AVR COFF: |
|
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
MSG_FLASH = Creating load file for Flash: |
|
MSG_EEPROM = Creating load file for EEPROM: |
|
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
MSG_LINKING = Linking: |
|
MSG_COMPILING = Compiling: |
|
MSG_ASSEMBLING = Assembling: |
|
MSG_CLEANING = Cleaning project: |
|
|
|
|
|
|
|
|
|
# Define all object files. |
|
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) |
|
|
|
# Define all listing files. |
|
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) |
|
|
|
|
|
# Compiler flags to generate dependency files. |
|
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d |
|
|
|
|
|
# Combine all necessary flags and optional flags. |
|
# Add target processor to flags. |
|
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
|
|
|
|
|
|
############################################################ |
|
# May 25, 2010 <MLS> Adding 1280 support |
|
mega1280: MCU = atmega1280 |
|
mega1280: F_CPU = 16000000 |
|
mega1280: BOOTLOADER_ADDRESS = 1E000 |
|
mega1280: CFLAGS += -D_MEGA_BOARD_ |
|
mega1280: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_mega1280.hex |
|
|
|
|
|
############################################################ |
|
# Jul 6, 2010 <MLS> Adding 2560 support |
|
mega2560: MCU = atmega2560 |
|
mega2560: F_CPU = 16000000 |
|
mega2560: BOOTLOADER_ADDRESS = 3E000 |
|
mega2560: CFLAGS += -D_MEGA_BOARD_ |
|
mega2560: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_mega2560.hex |
|
|
|
|
|
############################################################ |
|
#Initial config on Amber128 board |
|
# avrdude: Device signature = 0x1e9702 |
|
# avrdude: safemode: lfuse reads as 8F |
|
# avrdude: safemode: hfuse reads as CB |
|
# avrdude: safemode: efuse reads as FF |
|
# Jul 17, 2010 <MLS> Adding 128 support |
|
############################################################ |
|
amber128: MCU = atmega128 |
|
#amber128: F_CPU = 16000000 |
|
amber128: F_CPU = 14745600 |
|
amber128: BOOTLOADER_ADDRESS = 1E000 |
|
amber128: CFLAGS += -D_BOARD_AMBER128_ |
|
amber128: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_amber128.hex |
|
|
|
############################################################ |
|
# Aug 23, 2010 <MLS> Adding atmega2561 support |
|
m2561_8mhz: MCU = atmega2561 |
|
m2561_8mhz: F_CPU = 8000000 |
|
m2561_8mhz: BOOTLOADER_ADDRESS = 3E000 |
|
m2561_8mhz: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=57600 |
|
m2561_8mhz: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_m2561_8mhz.hex |
|
|
|
|
|
############################################################ |
|
# Aug 23, 2010 <MLS> Adding atmega2561 support |
|
m2561_16mhz: MCU = atmega2561 |
|
m2561_16mhz: F_CPU = 16000000 |
|
m2561_16mhz: BOOTLOADER_ADDRESS = 3E000 |
|
m2561_16mhz: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=115200 |
|
m2561_16mhz: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_m2561_16mhz.hex |
|
|
|
############################################################ |
|
# avrdude: Device signature = 0x1e9801 |
|
# avrdude: safemode: lfuse reads as EC |
|
# avrdude: safemode: hfuse reads as 18 |
|
# avrdude: safemode: efuse reads as FD |
|
# Aug 23, 2010 <MLS> Adding cerebot 2560 @ 8mhz |
|
#avrdude -P usb -c usbtiny -p m2560 -v -U flash:w:/Arduino/WiringBootV2_upd1/stk500boot_v2_cerebotplus.hex |
|
############################################################ |
|
cerebot: MCU = atmega2560 |
|
cerebot: F_CPU = 8000000 |
|
cerebot: BOOTLOADER_ADDRESS = 3E000 |
|
cerebot: CFLAGS += -D_CEREBOTPLUS_BOARD_ -DBAUDRATE=38400 -DUART_BAUDRATE_DOUBLE_SPEED=1 |
|
cerebot: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_cerebotplus.hex |
|
|
|
|
|
############################################################ |
|
# Aug 23, 2010 <MLS> Adding atmega32 support |
|
penguino: MCU = atmega32 |
|
penguino: F_CPU = 16000000 |
|
penguino: BOOTLOADER_ADDRESS = 7800 |
|
penguino: CFLAGS += -D_PENGUINO_ -DBAUDRATE=57600 |
|
penguino: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_penguino.hex |
|
|
|
|
|
############################################################ |
|
# Sep 8, 2010 <MLS> Adding atmega16 support |
|
atmega16: MCU = atmega16 |
|
atmega16: F_CPU = 8000000 |
|
atmega16: BOOTLOADER_ADDRESS = 3800 |
|
atmega16: CFLAGS += -DBOARD_MEGA16 -DBAUDRATE=57600 |
|
atmega16: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_atmega16.hex |
|
|
|
|
|
############################################################ |
|
# Sep 17, 2010 <MLS> Adding BahBots 1284p |
|
bahbot: MCU = atmega1284p |
|
bahbot: F_CPU = 18432000 |
|
bahbot: BOOTLOADER_ADDRESS = 1E000 |
|
bahbot: CFLAGS += -D_BOARD_BAHBOT_ -DBAUDRATE=38400 |
|
bahbot: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_bahbots1284.hex |
|
|
|
|
|
############################################################ |
|
# Sep 24, 2010 <MLS> custom bootloader for ro-bot-x |
|
robotx: MCU = atmega640 |
|
robotx: F_CPU = 16000000 |
|
robotx: BOOTLOADER_ADDRESS = E000 |
|
robotx: CFLAGS += -D_BOARD_ROBOTX_ -DBAUDRATE=115200 -DENABLE_MONITOR |
|
robotx: begin gccversion sizebefore build sizeafter end |
|
mv $(TARGET).hex stk500boot_v2_robotx640uart1.hex |
|
|
|
|
|
# Default target. |
|
all: begin gccversion sizebefore build sizeafter end |
|
|
|
build: elf hex eep lss sym |
|
#build: hex eep lss sym |
|
|
|
elf: $(TARGET).elf |
|
hex: $(TARGET).hex |
|
eep: $(TARGET).eep |
|
lss: $(TARGET).lss |
|
sym: $(TARGET).sym |
|
|
|
|
|
|
|
# Eye candy. |
|
# AVR Studio 3.x does not check make's exit code but relies on |
|
# the following magic strings to be generated by the compile job. |
|
begin: |
|
@echo |
|
@echo $(MSG_BEGIN) |
|
|
|
end: |
|
@echo $(MSG_END) |
|
@echo |
|
|
|
|
|
# Display size of file. |
|
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf |
|
|
|
sizebefore: |
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
2>/dev/null; echo; fi |
|
|
|
sizeafter: |
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
2>/dev/null; echo; fi |
|
|
|
|
|
|
|
# Display compiler version information. |
|
gccversion : |
|
@$(CC) --version |
|
|
|
|
|
|
|
# Program the device. |
|
program: $(TARGET).hex $(TARGET).eep |
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
|
|
|
|
# Generate avr-gdb config/init file which does the following: |
|
# define the reset signal, load the target file, connect to target, and set |
|
# a breakpoint at main(). |
|
gdb-config: |
|
@$(REMOVE) $(GDBINIT_FILE) |
|
@echo define reset >> $(GDBINIT_FILE) |
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
@echo end >> $(GDBINIT_FILE) |
|
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
ifeq ($(DEBUG_BACKEND),simulavr) |
|
@echo load >> $(GDBINIT_FILE) |
|
endif |
|
@echo break main >> $(GDBINIT_FILE) |
|
|
|
debug: gdb-config $(TARGET).elf |
|
ifeq ($(DEBUG_BACKEND), avarice) |
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
@$(WINSHELL) /c pause |
|
|
|
else |
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
endif |
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
|
|
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
COFFCONVERT=$(OBJCOPY) --debugging \ |
|
--change-section-address .data-0x800000 \ |
|
--change-section-address .bss-0x800000 \ |
|
--change-section-address .noinit-0x800000 \ |
|
--change-section-address .eeprom-0x810000 |
|
|
|
|
|
|
|
coff: $(TARGET).elf |
|
@echo |
|
@echo $(MSG_COFF) $(TARGET).cof |
|
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
|
|
|
|
extcoff: $(TARGET).elf |
|
@echo |
|
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file. |
|
%.hex: %.elf |
|
@echo |
|
@echo $(MSG_FLASH) $@ |
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ |
|
|
|
%.eep: %.elf |
|
@echo |
|
@echo $(MSG_EEPROM) $@ |
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ |
|
|
|
# Create extended listing file from ELF output file. |
|
%.lss: %.elf |
|
@echo |
|
@echo $(MSG_EXTENDED_LISTING) $@ |
|
$(OBJDUMP) -h -S $< > $@ |
|
|
|
# Create a symbol table from ELF output file. |
|
%.sym: %.elf |
|
@echo |
|
@echo $(MSG_SYMBOL_TABLE) $@ |
|
$(NM) -n $< > $@ |
|
|
|
|
|
|
|
# Link: create ELF output file from object files. |
|
.SECONDARY : $(TARGET).elf |
|
.PRECIOUS : $(OBJ) |
|
%.elf: $(OBJ) |
|
@echo |
|
@echo $(MSG_LINKING) $@ |
|
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
|
|
|
|
# Compile: create object files from C source files. |
|
%.o : %.c |
|
@echo |
|
@echo $(MSG_COMPILING) $< |
|
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
|
|
|
|
# Compile: create assembler files from C source files. |
|
%.s : %.c |
|
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
|
|
|
|
# Assemble: create object files from assembler source files. |
|
%.o : %.S |
|
@echo |
|
@echo $(MSG_ASSEMBLING) $< |
|
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
|
|
# Create preprocessed source for use in sending a bug report. |
|
%.i : %.c |
|
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
|
|
|
|
# Target: clean project. |
|
clean: begin clean_list end |
|
|
|
clean_list : |
|
@echo |
|
@echo $(MSG_CLEANING) |
|
$(REMOVE) *.hex |
|
$(REMOVE) *.eep |
|
$(REMOVE) *.cof |
|
$(REMOVE) *.elf |
|
$(REMOVE) *.map |
|
$(REMOVE) *.sym |
|
$(REMOVE) *.lss |
|
$(REMOVE) $(OBJ) |
|
$(REMOVE) $(LST) |
|
$(REMOVE) $(SRC:.c=.s) |
|
$(REMOVE) $(SRC:.c=.d) |
|
$(REMOVE) .dep/* |
|
|
|
|
|
|
|
# Include the dependency files. |
|
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
|
|
|
|
# Listing of phony targets. |
|
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
build elf hex eep lss sym coff extcoff \ |
|
clean clean_list program debug gdb-config |
|
|
|
|