px4_autopilot/msg/gps_dump.msg

# This message is used to dump the raw gps communication to the log.
# Set the parameter GPS_DUMP_COMM to 1 to use this.

uint8 len			# length of data, MSB bit set = message to the gps device,
				# clear = message from the device
uint8[79] data			# data to write to the log
gps file dump: re-implement with an uORB topic & write to the log file (#4987) Drawbacks of the previous method: when writing to the SD card, there are high delays in the write() call of several 100ms, every now and then. The frequency and length of these events depend on: - SD card - used logger bandwidth - bandwidth of gps data (RTCM) Since the whole gps thread was blocked during this period, it lead to gps timeouts and lost module. What we do now is: publish an orb topic with queuing. This makes it async and the logger takes care of buffering. This means it's best to: - use high logger rate - use large logger buffer - reduce logger bandwith by disabling unused topics 9 years ago			`# This message is used to dump the raw gps communication to the log.`
			`# Set the parameter GPS_DUMP_COMM to 1 to use this.`

			`uint8 len # length of data, MSB bit set = message to the gps device,`
			`# clear = message from the device`
			`uint8[79] data # data to write to the log`