px4_autopilot/ROMFS/px4fmu_common/init.d/airframes/4050_generic_250

#!/bin/sh
#
# @name Generic 250 Racer
#
# @type Quadrotor x
# @class Copter
#
# @maintainer Lorenz Meier <lorenz@px4.io>
#
# @board intel_aerofc-v1 exclude
# @board bitcraze_crazyflie exclude
#

. ${R}etc/init.d/rc.mc_defaults

set MIXER quad_x
set PWM_OUT 1234

if [ $AUTOCNF = yes ]
then
	param set MC_ROLL_P 8
	param set MC_ROLLRATE_P 0.08
	param set MC_ROLLRATE_I 0.25
	param set MC_ROLLRATE_D 0.001
	param set MC_PITCH_P 8
	param set MC_PITCHRATE_P 0.08
	param set MC_PITCHRATE_I 0.25
	param set MC_PITCHRATE_D 0.001
	param set MC_YAW_P 4
	param set MC_YAWRATE_P 0.2
	param set MC_YAWRATE_I 0.1
	param set MC_YAWRATE_D 0

	param set MC_ROLLRATE_MAX 1600
	param set MC_PITCHRATE_MAX 1600
	param set MC_YAWRATE_MAX 1000

	param set MPC_MANTHR_MIN 0
	param set MPC_MAN_TILT_MAX 60

	# use thrust curve factor (instead of TPA)
	param set THR_MDL_FAC 0.3

	param set PWM_MIN 1075
	# enable one-shot
	param set PWM_RATE 0

	# enable high-rate logging profile (helps with tuning)
	param set SDLOG_PROFILE 19

	param set IMU_DGYRO_CUTOFF 50
	param set IMU_GYRO_CUTOFF 90

	param set CBRK_IO_SAFETY 22027
fi