px4_autopilot/ROMFS/tap_common/init.d/rcS

#!nsh
#
# PX4FMU startup script.
#
#  NOTE: COMMENT LINES ARE REMOVED BEFORE STORED IN ROMFS.
#

#
# Start CDC/ACM serial driver
#
sercon

#
# Default to auto-start mode.
#
set MODE autostart

set TUNE_ERR ML<<CP4CP4CP4CP4CP4
set LOG_FILE /fs/microsd/bootlog.txt

#
# Try to mount the microSD card.
#
# REBOOTWORK this needs to start after the flight control loop
if mount -t vfat /dev/mmcsd0 /fs/microsd
then
	# Start playing the startup tune
	tone_alarm start
else
	tone_alarm MBAGP
	if mkfatfs /dev/mmcsd0
	then
		if mount -t vfat /dev/mmcsd0 /fs/microsd
		then
			echo "INFO  [init] MicroSD card formatted"
		else
			echo "ERROR [init] Format failed"
			tone_alarm MNBG
			set LOG_FILE /dev/null
		fi
	else
		set LOG_FILE /dev/null
	fi
fi

#
# Look for an init script on the microSD card.
# Disable autostart if the script found.
#
set FRC /fs/microsd/etc/rc.txt
if [ -f $FRC ]
then
	echo "INFO  [init] Executing script: $FRC"
	sh $FRC
	set MODE custom
fi
unset FRC

if [ $MODE == autostart ]
then

	#
	# Start the ORB (first app to start)
	#
	uorb start

	#
	# Load parameters
	#
	set PARAM_FILE /fs/microsd/params
	if mtd start
	then
		set PARAM_FILE /fs/mtd_params
	fi

	param select $PARAM_FILE
	if param load
	then
	else
		if param reset
		then
		fi
	fi

	#
	# Start system state indicator
	#
	if rgbled start
	then
	fi

	#
	# Set AUTOCNF flag to use it in AUTOSTART scripts
	#
	if param compare SYS_AUTOCONFIG 1
	then
		# Wipe out params except RC*
		param reset_nostart RC*
		set AUTOCNF yes
	else
		set AUTOCNF no
	fi

	#
	# Set default values
	#
	set VEHICLE_TYPE none
	set MIXER none
	set OUTPUT_MODE none
	set PWM_OUT none
	set PWM_RATE none
	set PWM_DISARMED none
	set PWM_MIN none
	set PWM_MAX none
	set FMU_MODE pwm
	set MAVLINK_F default
	set EXIT_ON_END no
	set MAV_TYPE none
	set FAILSAFE none
	set USE_IO no
	

	#
	# Set parameters and env variables for selected AUTOSTART
	#
	if param compare SYS_AUTOSTART 0
	then
		echo "INFO  [init] No autostart"
	else
		sh /etc/init.d/rc.autostart
	fi
	unset MODE

	#
	# If autoconfig parameter was set, reset it and save parameters
	#
	if [ $AUTOCNF == yes ]
	then
		param set SYS_AUTOCONFIG 0
		param save
	fi
	unset AUTOCNF

	#
	# Set default output if not set
	#
	if [ $OUTPUT_MODE == none ]
	then
		if [ $USE_IO == yes ]
		then
			set OUTPUT_MODE io
		else
			set OUTPUT_MODE fmu
		fi
	fi

	# waypoint storage
	# REBOOTWORK this needs to start in parallel
	if dataman start
	then
	fi

	#
	# Sensors System (start before Commander so Preflight checks are properly run)
	#
	sh /etc/init.d/rc.sensors

	commander start

	#
	# Start CPU load monitor
	#
	load_mon start

	#
	# Start primary output
	#
	set TTYS1_BUSY no

	#
	# Check if UAVCAN is enabled, default to it for ESCs
	#
	if param greater UAVCAN_ENABLE 2
	then
		set OUTPUT_MODE uavcan_esc
	fi

	# If OUTPUT_MODE == none then something is wrong with setup and we shouldn't try to enable output
	if [ $OUTPUT_MODE != none ]
	then
		if [ $OUTPUT_MODE == uavcan_esc ]
		then
			if param compare UAVCAN_ENABLE 0
			then
				echo "INFO  [init] OVERRIDING UAVCAN_ENABLE = 1" >> $LOG_FILE
				param set UAVCAN_ENABLE 1
			fi
		fi

		if [ $OUTPUT_MODE == fmu ]
		then
			if fmu mode_$FMU_MODE
			then
			else
				echo "ERR  [init] FMU start failed" >> $LOG_FILE
				tone_alarm $TUNE_ERR
			fi
		fi

		if fmu mode_pwm4
		then
		else
			echo "ERROR [init] FMU mode_$FMU_MODE start failed" >> $LOG_FILE
			tone_alarm $TUNE_ERR
		fi
	fi

	mavlink start -r 1200 -d /dev/ttyS1

	#
	# Starting stuff according to UAVCAN_ENABLE value
	#
	if param greater UAVCAN_ENABLE 0
	then
		if uavcan start
		then
		else
			tone_alarm $TUNE_ERR
		fi
	fi

	if param greater UAVCAN_ENABLE 1
	then
		if uavcan start fw
		then
		else
			tone_alarm $TUNE_ERR
		fi
	fi

	#
	# Optional drivers
	#

	# Sensors on the PWM interface bank
	if param compare SENS_EN_LL40LS 1
	then
		if pwm_input start
		then
			if ll40ls start pwm
			then
			fi
		fi
	fi

	# sf0x lidar sensor
	if param compare SENS_EN_SF0X 1
	then
		sf0x start
	fi

	# Start USB shell if no microSD present, MAVLink else
	if [ $LOG_FILE == /dev/null ]
	then
		# Try to get an USB console
		nshterm /dev/ttyACM0 &
	else
		mavlink start -r 800000 -d /dev/ttyACM0 -m config -x
	fi

	#
	# Logging
	#
	if param compare SYS_LOGGER 0
	then
		if sdlog2 start -r 100 -a -b 9 -t
		then
		fi
	else
		if logger start -b 12 -t
		then
		fi
	fi

	#
	# Fixed wing setup
	#
	if [ $VEHICLE_TYPE == fw ]
	then
		echo "INFO  [init] Fixedwing"

		if [ $MIXER == none ]
		then
			# Set default mixer for fixed wing if not defined
			set MIXER AERT
		fi

		if [ $MAV_TYPE == none ]
		then
			# Use MAV_TYPE = 1 (fixed wing) if not defined
			set MAV_TYPE 1
		fi

		param set MAV_TYPE $MAV_TYPE

		# Load mixer and configure outputs
		sh /etc/init.d/rc.interface

		# Start standard fixedwing apps
		sh /etc/init.d/rc.fw_apps
	fi

	#
	# Multicopters setup
	#
	if [ $VEHICLE_TYPE == mc ]
	then
		echo "INFO  [init] Multicopter"

		if [ $MIXER == none ]
		then
			echo "INFO  [init] Mixer undefined"
		fi

		if [ $MAV_TYPE == none ]
		then
			# Use mixer to detect vehicle type
			if [ $MIXER == quad_x -o $MIXER == quad_+ ]
			then
				set MAV_TYPE 2
			fi
			if [ $MIXER == quad_w ]
			then
				set MAV_TYPE 2
			fi
			if [ $MIXER == quad_h ]
			then
				set MAV_TYPE 2
			fi
			if [ $MIXER == tri_y_yaw- -o $MIXER == tri_y_yaw+ ]
			then
				set MAV_TYPE 15
			fi
			if [ $MIXER == hexa_x -o $MIXER == hexa_+ ]
			then
				set MAV_TYPE 13
			fi
			if [ $MIXER == hexa_cox ]
			then
				set MAV_TYPE 13
			fi
			if [ $MIXER == octo_x -o $MIXER == octo_+ ]
			then
				set MAV_TYPE 14
			fi
		fi

		# Still no MAV_TYPE found
		if [ $MAV_TYPE == none ]
		then
			echo "WARN  [init] Unknown MAV_TYPE"
			param set MAV_TYPE 2
		else
			param set MAV_TYPE $MAV_TYPE
		fi

		# Load mixer and configure outputs
		sh /etc/init.d/rc.interface

		# Start standard multicopter apps
		sh /etc/init.d/rc.mc_apps
	fi

	#
	# VTOL setup
	#
	if [ $VEHICLE_TYPE == vtol ]
	then
		echo "INFO  [init] VTOL"

		if [ $MIXER == none ]
		then
			echo "WARN  [init] VTOL mixer undefined"
		fi

		if [ $MAV_TYPE == none ]
		then
			# Use mixer to detect vehicle type
			if [ $MIXER == caipirinha_vtol ]
			then
				set MAV_TYPE 19
			fi
			if [ $MIXER == firefly6 ]
			then
				set MAV_TYPE 21
			fi
			if [ $MIXER == quad_x_pusher_vtol ]
			then
				set MAV_TYPE 22
			fi
		fi

		# Still no MAV_TYPE found
		if [ $MAV_TYPE == none ]
		then
			echo "WARN  [init] Unknown MAV_TYPE"
			param set MAV_TYPE 19
		else
			param set MAV_TYPE $MAV_TYPE
		fi

		# Load mixer and configure outputs
		sh /etc/init.d/rc.interface

		# Start standard vtol apps
		sh /etc/init.d/rc.vtol_apps
	fi

	#
	# Rover setup
	#
	if [ $VEHICLE_TYPE == rover ]
	then
		# 10 is MAV_TYPE_GROUND_ROVER
		set MAV_TYPE 10

		# Load mixer and configure outputs
		sh /etc/init.d/rc.interface

		# Start standard rover apps
		sh /etc/init.d/rc.axialracing_ax10_apps

		param set MAV_TYPE 10
	fi

	unset MIXER
	unset MAV_TYPE
	unset OUTPUT_MODE

	#
	# Start the navigator
	#
	navigator start

	#
	# Generic setup (autostart ID not found)
	#
	if [ $VEHICLE_TYPE == none ]
	then
		echo "WARN  [init] No autostart ID found"
	fi

	# Start any custom addons
	set FEXTRAS /fs/microsd/etc/extras.txt
	if [ -f $FEXTRAS ]
	then
		echo "INFO  [init] Addons script: $FEXTRAS"
		sh $FEXTRAS
	fi
	unset FEXTRAS

	# Run no SD alarm
	if [ $LOG_FILE == /dev/null ]
	then
		# Play SOS
		tone_alarm error
	fi

# End of autostart
fi

# There is no further script processing, so we can free some RAM
# XXX potentially unset all script variables.
unset TUNE_ERR

# Boot is complete, inform MAVLink app(s) that the system is now fully up and running
mavlink boot_complete

if [ $EXIT_ON_END == yes ]
then
	echo "INFO  [init] NSH exit"
	exit
fi
unset EXIT_ON_END