Rename asc board to aerofc

Images/aerofc-v1.prototype

@@ -1,10 +1,10 @@
 {
     "board_id": 65,
     "magic": "PX4FWv1",
-    "description": "Firmware for the ASCv1 board",
+    "description": "Firmware for the Intel Aero FC board",
     "image": "",
     "build_time": 0,
-    "summary": "ASCv1",
+    "summary": "AEROFCv1",
     "version": "0.1",
     "image_size": 0,
     "git_identity": "",

Makefile

@@ -224,7 +224,7 @@ check: 	check_px4fmu-v1_default \
 	check_mindpx-v2_default \
 	check_posix_sitl_default \
 	check_tap-v1_default \
-	check_asc-v1_default \
+	check_aerofc-v1_default \
 	check_px4-stm32f4discovery_default \
 	check_crazyflie_default \
 	check_tests \

cmake/configs/nuttx_aerofc-v1_default.cmake

@@ -11,7 +11,7 @@ set(config_module_list
 	drivers/stm32/adc
 	drivers/led
 	#drivers/px4fmu
-	drivers/boards/asc-v1
+	drivers/boards/aerofc-v1
 	drivers/rgbled_pwm
 	drivers/tap_esc
 	drivers/mpu6500

src/drivers/boards/aerofc-v1/CMakeLists.txt

@@ -32,15 +32,15 @@
 #
 ############################################################################
 px4_add_module(
-	MODULE drivers__boards__asc-v1
+	MODULE drivers__boards__aerofc-v1
 	COMPILE_FLAGS
 	SRCS
 		../common/board_name.c
-		asc_init.c
+		aerofc_init.c
-		asc_timer_config.c
+		aerofc_timer_config.c
-		asc_spi.c
+		aerofc_spi.c
-		asc_usb.c
+		aerofc_usb.c
-		asc_led.c
+		aerofc_led.c
 	DEPENDS
 		platforms__common
 	)

src/drivers/boards/aerofc-v1/aerofc_spi.c

@@ -64,7 +64,7 @@
  * Name: stm32_spiinitialize
  *
  * Description:
- *   Called to configure SPI chip select GPIO pins for the tap-v1 board.
+ *   Called to configure SPI chip select GPIO pins for the AEROFC-v1 board.
  *
  ************************************************************************************/
 
@@ -197,4 +197,4 @@ __EXPORT void stm32_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
 __EXPORT uint8_t stm32_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
 {
 	return SPI_STATUS_PRESENT;
-}
+}

src/drivers/boards/aerofc-v1/board_config.h

@@ -37,7 +37,7 @@
  * @author David Sidrane <david_s5@nscdg.com>
  * @author Lorenz Meier <lorenz@px4.io>
  *
- * TAP_V1 internal definitions
+ * AEROFC_V1 internal definitions
  */
 
 #pragma once
@@ -201,7 +201,7 @@
 #define HRT_TIMER		3	/* use timer8 for the HRT */
 #define HRT_TIMER_CHANNEL	4	/* use capture/compare channel */
 
-#define	BOARD_NAME "TAP_V1"
+#define	BOARD_NAME "AEROFC_V1"
 
 /* By Providing BOARD_ADC_USB_CONNECTED this board support the ADC
  * system_power interface, and herefore provides the true logic

src/drivers/drv_gpio.h

@@ -219,7 +219,7 @@
 /* no GPIO driver on the PX4_STM32F4DISCOVERY board */
 #endif
 
-#ifdef CONFIG_ARCH_BOARD_ASC_V1
+#ifdef CONFIG_ARCH_BOARD_AEROFC_V1
 /* no GPIO driver on the ASC board */
 #endif
 
@@ -239,6 +239,7 @@
 	!defined(CONFIG_ARCH_BOARD_SITL) && \
 	!defined(CONFIG_ARCH_BOARD_TAP_V1) && \
 	!defined(CONFIG_ARCH_BOARD_ASC_V1) && \
+	!defined(CONFIG_ARCH_BOARD_AEROFC_V1) && \
 	!defined(CONFIG_ARCH_BOARD_CRAZYFLIE)
 # error No CONFIG_ARCH_BOARD_xxxx set
 #endif