Fix an issue for architectures where interrupt numbers and vector numbers do not match 1-to-1

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4258 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/Documentation/NuttxPortingGuide.html

@@ -3554,6 +3554,15 @@ void (*notify)(FAR struct pm_callback_s *cb, enum pm_state_e pmstate);
   <li><code>CONFIG_ARCH_NOINTC</code>:
      Define if the architecture does not support an interrupt controller
      or otherwise cannot support APIs like up_enable_irq() and up_disable_irq().</li>
+  <li><code>CONFIG_ARCH_VECNOTIRQ</code>:
+     Usually the interrupt vector number provided to interfaces like <code>irq_attach()</code>
+     and <code>irq_detach</code> are the same as IRQ numbers that are provied to IRQ
+     management functions like <code>up_enable_irq()</code> and <code>up_disable_irq()</code>.
+     But that is not true for all interrupt controller implementations.  For example, the
+     PIC32MX interrupt controller manages interrupt sources that have a many-to-one
+     relationship to interrupt vectors.
+     In such cases, <code>CONFIG_ARCH_VECNOTIRQ</code> must defined so that the OS logic
+     will know not to assume it can use a vector number to enable or disable interrupts.
   <li><code>CONFIG_ARCH_IRQPRIO</code>:
      Define if the architecture supports prioritization of interrupts and the
      up_prioritize_irq() API.</li>

nuttx/configs/README.txt

@@ -138,6 +138,15 @@ defconfig -- This is a configuration file similar to the Linux
 		CONFIG_ARCH_NOINTC - define if the architecture does not
 		  support an interrupt controller or otherwise cannot support
 		  APIs like up_enable_irq() and up_disable_irq().
+		CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+		  to interfaces like irq_attach() and irq_detach are the same as IRQ
+		  numbers that are provied to IRQ management functions like
+		  up_enable_irq() and up_disable_irq().  But that is not true for all
+		  interrupt controller implementations.  For example, the PIC32MX
+		  interrupt controller manages interrupt sources that have a many-to-one
+		  relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+		  must defined so that the OS logic will know not to assume it can use
+		  a vector number to enable or disable interrupts.
 		CONFIG_ARCH_IRQPRIO
 		  Define if the architecture suports prioritizaton of interrupts
 		  and the up_prioritize_irq() API.

nuttx/configs/pcblogic-pic32mx/nsh/defconfig

@@ -1,7 +1,7 @@
 ############################################################################
 # configs/pcblogic-pic32mx/nsh/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.orgr>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -53,6 +53,18 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
 # CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
@@ -81,6 +93,8 @@ CONFIG_BOARD_LOOPSPERMSEC=8079
 CONFIG_DRAM_SIZE=(32*1024)
 CONFIG_DRAM_START=0xa0000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=n
+CONFIG_ARCH_VECNOTIRQ=y
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y

nuttx/configs/pcblogic-pic32mx/ostest/defconfig

@@ -53,6 +53,18 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
 # CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
@@ -81,6 +93,8 @@ CONFIG_BOARD_LOOPSPERMSEC=8079
 CONFIG_DRAM_SIZE=(32*1024)
 CONFIG_DRAM_START=0xa0000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=n
+CONFIG_ARCH_VECNOTIRQ=y
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y

nuttx/configs/pic32-starterkit/ostest/defconfig

@@ -55,6 +55,18 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
 # CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
@@ -80,6 +92,8 @@ CONFIG_BOARD_LOOPSPERMSEC=5560
 CONFIG_DRAM_SIZE=(128*1024)
 CONFIG_DRAM_START=0xa0000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=n
+CONFIG_ARCH_VECNOTIRQ=y
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y

nuttx/configs/sure-pic32mx/nsh/defconfig

@@ -55,6 +55,30 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
 # CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
@@ -80,6 +104,8 @@ CONFIG_BOARD_LOOPSPERMSEC=4275
 CONFIG_DRAM_SIZE=(32*1024)
 CONFIG_DRAM_START=0xa0000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=n
+CONFIG_ARCH_VECNOTIRQ=y
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y

nuttx/configs/sure-pic32mx/ostest/defconfig

@@ -55,6 +55,18 @@
 # CONFIG_DRAM_SIZE - Describes the installed DRAM.
 # CONFIG_DRAM_START - The start address of DRAM (physical)
 # CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_NOINTC - define if the architecture does not
+#   support an interrupt controller or otherwise cannot support
+#   APIs like up_enable_irq() and up_disable_irq().
+# CONFIG_ARCH_VECNOTIRQ - Usually the interrupt vector number provided
+#   to interfaces like irq_attach() and irq_detach are the same as IRQ
+#   numbers that are provied to IRQ management functions like
+#   up_enable_irq() and up_disable_irq().  But that is not true for all
+#   interrupt controller implementations.  For example, the PIC32MX
+#   interrupt controller manages interrupt sources that have a many-to-one
+#   relationship to interrupt vectors. In such cases, CONFIG_ARCH_VECNOTIRQ
+#   must defined so that the OS logic will know not to assume it can use
+#   a vector number to enable or disable interrupts.
 # CONFIG_ARCH_IRQPRIO - The PIC32MX supports interrupt prioritization
 # CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
 #   stack. If defined, this symbol is the size of the interrupt
@@ -80,6 +92,8 @@ CONFIG_BOARD_LOOPSPERMSEC=4275
 CONFIG_DRAM_SIZE=(32*1024)
 CONFIG_DRAM_START=0xa0000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_NOINTC=n
+CONFIG_ARCH_VECNOTIRQ=y
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_INTERRUPTSTACK=n
 CONFIG_ARCH_STACKDUMP=y

nuttx/include/nuttx/arch.h

@@ -1,8 +1,8 @@
 /****************************************************************************
  * include/nuttx/arch.h
  *
- *   Copyright (C) 2007-2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

nuttx/sched/irq_attach.c

@@ -1,8 +1,8 @@
 /****************************************************************************
  * sched/irq_attach.c
  *
- *   Copyright (C) 2007-2008, 2010 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2008, 2010, 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -91,9 +91,23 @@ int irq_attach(int irq, xcpt_t isr)
       state = irqsave();
       if (isr == NULL)
         {
-#ifndef CONFIG_ARCH_NOINTC
+          /* Disable the interrupt if we can before detaching it.  We might
-           up_disable_irq(irq);
+           * not be able to do this if:  (1) the device does not have a 
+           * centralized interrupt controller (so up_disable_irq() is not
+           * supported.  Or (2) if the device has different number for vector
+           * numbers and IRQ numbers (in that case, we don't know the correct
+           * IRQ number to use to disable the interrupt.  In those cases, the
+           * code will just need to be careful that it disables all interrupt
+           * sources before detaching from the interrupt vector.
+           */
+
+#if !defined(CONFIG_ARCH_NOINTC) && !defined(CONFIG_ARCH_VECNOTIRQ)
+          up_disable_irq(irq);
 #endif
+          /* Detaching the ISR really means re-attaching it to the
+           * unexpected exception handler.
+           */
+
            isr = irq_unexpected_isr;
         }