zrzk
/
px4_autopilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

sensors params split by sensor index

sbg
Daniel Agar 7 years ago
parent
273742aa0d
commit
1ccbaf4cd2
13 changed files with 1058 additions and 747 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 89
      src/modules/sensors/sensor_params_acc0.c
  2. 89
      src/modules/sensors/sensor_params_acc1.c
  3. 89
      src/modules/sensors/sensor_params_acc2.c
  4. 171
      src/modules/sensors/sensor_params_accel.c
  5. 171
      src/modules/sensors/sensor_params_gyro.c
  6. 89
      src/modules/sensors/sensor_params_gyro0.c
  7. 89
      src/modules/sensors/sensor_params_gyro1.c
  8. 89
      src/modules/sensors/sensor_params_gyro2.c
  9. 405
      src/modules/sensors/sensor_params_mag.c
  10. 131
      src/modules/sensors/sensor_params_mag0.c
  11. 131
      src/modules/sensors/sensor_params_mag1.c
  12. 131
      src/modules/sensors/sensor_params_mag2.c
  13. 131
      src/modules/sensors/sensor_params_mag3.c

89
src/modules/sensors/sensor_params_acc0.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_ID, 0);
/**
* Accelerometer 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZSCALE, 1.0f);

89
src/modules/sensors/sensor_params_acc1.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_ID, 0);
/**
* Accelerometer 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZSCALE, 1.0f);

89
src/modules/sensors/sensor_params_acc2.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_ID, 0);
/**
* Accelerometer 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZSCALE, 1.0f);

171
src/modules/sensors/sensor_params_accel.c
Unescape View File

@ -37,174 +37,3 @@ @@ -37,174 +37,3 @@
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC_PRIME, 0);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_ID, 0);
/**
* Accelerometer 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_ID, 0);
/**
* Accelerometer 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_ID, 0);
/**
* Accelerometer 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_EN, 1);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZSCALE, 1.0f);

171
src/modules/sensors/sensor_params_gyro.c
Unescape View File

@ -37,174 +37,3 @@ @@ -37,174 +37,3 @@
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO_PRIME, 0);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_ID, 0);
/**
* Gyro 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_ID, 0);
/**
* Gyro 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_ID, 0);
/**
* Gyro 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZSCALE, 1.0f);

89
src/modules/sensors/sensor_params_gyro0.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_ID, 0);
/**
* Gyro 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZSCALE, 1.0f);

89
src/modules/sensors/sensor_params_gyro1.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_ID, 0);
/**
* Gyro 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZSCALE, 1.0f);

89
src/modules/sensors/sensor_params_gyro2.c
Unescape View File

@ -0,0 +1,89 @@ @@ -0,0 +1,89 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_ID, 0);
/**
* Gyro 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_EN, 1);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZSCALE, 1.0f);

405
src/modules/sensors/sensor_params_mag.c
Unescape View File

@ -56,408 +56,3 @@ PARAM_DEFINE_INT32(CAL_MAG_PRIME, 0); @@ -56,408 +56,3 @@ PARAM_DEFINE_INT32(CAL_MAG_PRIME, 0);
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG_SIDES, 63);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ID, 0);
/**
* Mag 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_EN, 1);
/**
* Rotation of magnetometer 0 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ID, 0);
/**
* Mag 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_EN, 1);
/**
* Rotation of magnetometer 1 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ID, 0);
/**
* Mag 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_EN, 1);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ID, 0);
/**
* Mag 3 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_EN, 1);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZSCALE, 1.0f);

131
src/modules/sensors/sensor_params_mag0.c
Unescape View File

@ -0,0 +1,131 @@ @@ -0,0 +1,131 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ID, 0);
/**
* Mag 0 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_EN, 1);
/**
* Rotation of magnetometer 0 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZSCALE, 1.0f);

131
src/modules/sensors/sensor_params_mag1.c
Unescape View File

@ -0,0 +1,131 @@ @@ -0,0 +1,131 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ID, 0);
/**
* Mag 1 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_EN, 1);
/**
* Rotation of magnetometer 1 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZSCALE, 1.0f);

131
src/modules/sensors/sensor_params_mag2.c
Unescape View File

@ -0,0 +1,131 @@ @@ -0,0 +1,131 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ID, 0);
/**
* Mag 2 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_EN, 1);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZSCALE, 1.0f);

131
src/modules/sensors/sensor_params_mag3.c
Unescape View File

@ -0,0 +1,131 @@ @@ -0,0 +1,131 @@
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ID, 0);
/**
* Mag 3 enabled
*
* @boolean
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_EN, 1);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZSCALE, 1.0f);
Write Preview
Loading…
Cancel
Save