zrzk
/
px4_autopilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge branch 'sbus_failsafe' into failsafe_cleanup

sbg
Lorenz Meier 11 years ago
parent
797698a7a1 9a0b2b7610
commit
1d0b2b4aa8
5 changed files with 136 additions and 108 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 24
      src/drivers/px4io/px4io.cpp
  2. 190
      src/modules/px4iofirmware/controls.c
  3. 28
      src/modules/px4iofirmware/protocol.h
  4. 1
      src/modules/px4iofirmware/px4io.h
  5. 1
      src/modules/px4iofirmware/registers.c

24
src/drivers/px4io/px4io.cpp
Unescape View File

@ -944,8 +944,23 @@ PX4IO::task_main() @@ -944,8 +944,23 @@ PX4IO::task_main()
int pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_VBATT_SCALE, &scaling, 1);
if (pret != OK) {
log("voltage scaling upload failed");
log("vscale upload failed");
}
/* send RC throttle failsafe value to IO */
float failsafe_param_val;
param_t failsafe_param = param_find("RC_FS_THR");
if (failsafe_param > 0)
param_get(failsafe_param, &failsafe_param_val);
uint16_t failsafe_thr = failsafe_param_val;
pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RC_THR_FAILSAFE_US, &failsafe_thr, 1);
if (pret != OK) {
log("failsafe upload failed");
}
}
}
}
@ -1479,10 +1494,11 @@ PX4IO::io_publish_raw_rc() @@ -1479,10 +1494,11 @@ PX4IO::io_publish_raw_rc()
} else {
rc_val.input_source = RC_INPUT_SOURCE_UNKNOWN;
/* we do not know the RC input, only publish if RC OK flag is set */
/* if no raw RC, just don't publish */
if (!(_status & PX4IO_P_STATUS_FLAGS_RC_OK))
/* only keep publishing RC input if we ever got a valid input */
if (_rc_last_valid == 0) {
/* we have never seen valid RC signals, abort */
return OK;
}
}
/* lazily advertise on first publication */

190
src/modules/px4iofirmware/controls.c
Unescape View File

@ -134,8 +134,6 @@ controls_tick() { @@ -134,8 +134,6 @@ controls_tick() {
perf_begin(c_gather_sbus);
bool sbus_status = (r_status_flags & PX4IO_P_STATUS_FLAGS_RC_SBUS);
bool sbus_failsafe, sbus_frame_drop;
bool sbus_updated = sbus_input(r_raw_rc_values, &r_raw_rc_count, &sbus_failsafe, &sbus_frame_drop, PX4IO_RC_INPUT_CHANNELS);
@ -201,94 +199,102 @@ controls_tick() { @@ -201,94 +199,102 @@ controls_tick() {
/* update RC-received timestamp */
system_state.rc_channels_timestamp_received = hrt_absolute_time();
/* do not command anything in failsafe, kick in the RC loss counter */
if (!(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) {
/* update RC-received timestamp */
system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received;
/* map raw inputs to mapped inputs */
/* XXX mapping should be atomic relative to protocol */
for (unsigned i = 0; i < r_raw_rc_count; i++) {
/* map the input channel */
uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE];
if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) {
uint16_t raw = r_raw_rc_values[i];
int16_t scaled;
/*
* 1) Constrain to min/max values, as later processing depends on bounds.
*/
if (raw < conf[PX4IO_P_RC_CONFIG_MIN])
raw = conf[PX4IO_P_RC_CONFIG_MIN];
if (raw > conf[PX4IO_P_RC_CONFIG_MAX])
raw = conf[PX4IO_P_RC_CONFIG_MAX];
/*
* 2) Scale around the mid point differently for lower and upper range.
*
* This is necessary as they don't share the same endpoints and slope.
*
* First normalize to 0..1 range with correct sign (below or above center),
* then scale to 20000 range (if center is an actual center, -10000..10000,
* if parameters only support half range, scale to 10000 range, e.g. if
* center == min 0..10000, if center == max -10000..0).
*
* As the min and max bounds were enforced in step 1), division by zero
* cannot occur, as for the case of center == min or center == max the if
* statement is mutually exclusive with the arithmetic NaN case.
*
* DO NOT REMOVE OR ALTER STEP 1!
*/
if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) {
scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]));
} else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) {
scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN]));
} else {
/* in the configured dead zone, output zero */
scaled = 0;
}
/* invert channel if requested */
if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE)
scaled = -scaled;
/* update RC-received timestamp */
system_state.rc_channels_timestamp_valid = system_state.rc_channels_timestamp_received;
/* map raw inputs to mapped inputs */
/* XXX mapping should be atomic relative to protocol */
for (unsigned i = 0; i < r_raw_rc_count; i++) {
/* map the input channel */
uint16_t *conf = &r_page_rc_input_config[i * PX4IO_P_RC_CONFIG_STRIDE];
if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_ENABLED) {
uint16_t raw = r_raw_rc_values[i];
int16_t scaled;
/*
* 1) Constrain to min/max values, as later processing depends on bounds.
*/
if (raw < conf[PX4IO_P_RC_CONFIG_MIN])
raw = conf[PX4IO_P_RC_CONFIG_MIN];
if (raw > conf[PX4IO_P_RC_CONFIG_MAX])
raw = conf[PX4IO_P_RC_CONFIG_MAX];
/*
* 2) Scale around the mid point differently for lower and upper range.
*
* This is necessary as they don't share the same endpoints and slope.
*
* First normalize to 0..1 range with correct sign (below or above center),
* then scale to 20000 range (if center is an actual center, -10000..10000,
* if parameters only support half range, scale to 10000 range, e.g. if
* center == min 0..10000, if center == max -10000..0).
*
* As the min and max bounds were enforced in step 1), division by zero
* cannot occur, as for the case of center == min or center == max the if
* statement is mutually exclusive with the arithmetic NaN case.
*
* DO NOT REMOVE OR ALTER STEP 1!
*/
if (raw > (conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE])) {
scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_MAX] - conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE]));
} else if (raw < (conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE])) {
scaled = 10000.0f * ((raw - conf[PX4IO_P_RC_CONFIG_CENTER] + conf[PX4IO_P_RC_CONFIG_DEADZONE]) / (float)(conf[PX4IO_P_RC_CONFIG_CENTER] - conf[PX4IO_P_RC_CONFIG_DEADZONE] - conf[PX4IO_P_RC_CONFIG_MIN]));
} else {
/* in the configured dead zone, output zero */
scaled = 0;
}
/* and update the scaled/mapped version */
unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT];
if (mapped < PX4IO_CONTROL_CHANNELS) {
/* invert channel if requested */
if (conf[PX4IO_P_RC_CONFIG_OPTIONS] & PX4IO_P_RC_CONFIG_OPTIONS_REVERSE)
scaled = -scaled;
/* invert channel if pitch - pulling the lever down means pitching up by convention */
if (mapped == 1) /* roll, pitch, yaw, throttle, override is the standard order */
scaled = -scaled;
/* and update the scaled/mapped version */
unsigned mapped = conf[PX4IO_P_RC_CONFIG_ASSIGNMENT];
if (mapped < PX4IO_CONTROL_CHANNELS) {
r_rc_values[mapped] = SIGNED_TO_REG(scaled);
assigned_channels |= (1 << mapped);
/* invert channel if pitch - pulling the lever down means pitching up by convention */
if (mapped == 1) {
/* roll, pitch, yaw, throttle, override is the standard order */
scaled = -scaled;
}
if (mapped == 3 && r_setup_rc_thr_failsafe) {
/* throttle failsafe detection */
if (((raw < conf[PX4IO_P_RC_CONFIG_MIN]) && (raw < r_setup_rc_thr_failsafe)) ||
((raw > conf[PX4IO_P_RC_CONFIG_MAX]) && (raw > r_setup_rc_thr_failsafe))) {
r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_FAILSAFE;
} else {
r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_FAILSAFE);
}
}
r_rc_values[mapped] = SIGNED_TO_REG(scaled);
assigned_channels |= (1 << mapped);
}
}
}
/* set un-assigned controls to zero */
for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) {
if (!(assigned_channels & (1 << i)))
r_rc_values[i] = 0;
}
/* set un-assigned controls to zero */
for (unsigned i = 0; i < PX4IO_CONTROL_CHANNELS; i++) {
if (!(assigned_channels & (1 << i)))
r_rc_values[i] = 0;
}
/* set RC OK flag, as we got an update */
r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK;
/* set RC OK flag, as we got an update */
r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_OK;
/* if we have enough channels (5) to control the vehicle, the mapping is ok */
if (assigned_channels > 4) {
r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK;
} else {
r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK);
}
/* if we have enough channels (5) to control the vehicle, the mapping is ok */
if (assigned_channels > 4) {
r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_MAPPING_OK;
} else {
r_raw_rc_flags &= ~(PX4IO_P_RAW_RC_FLAGS_MAPPING_OK);
}
/*
@ -316,8 +322,13 @@ controls_tick() { @@ -316,8 +322,13 @@ controls_tick() {
* Handle losing RC input
*/
/* this kicks in if the receiver is gone or the system went to failsafe */
if (rc_input_lost || (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) {
/* if we are in failsafe, clear the override flag */
if (r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) {
r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_OVERRIDE);
}
/* this kicks in if the receiver is gone, but there is not on failsafe (indicated by separate flag) */
if (rc_input_lost) {
/* Clear the RC input status flag, clear manual override flag */
r_status_flags &= ~(
PX4IO_P_STATUS_FLAGS_OVERRIDE |
@ -326,27 +337,24 @@ controls_tick() { @@ -326,27 +337,24 @@ controls_tick() {
/* Mark all channels as invalid, as we just lost the RX */
r_rc_valid = 0;
/* Set raw channel count to zero */
r_raw_rc_count = 0;
/* Set the RC_LOST alarm */
r_status_alarms |= PX4IO_P_STATUS_ALARMS_RC_LOST;
}
/* this kicks in if the receiver is completely gone */
if (rc_input_lost) {
/* Set channel count to zero */
r_raw_rc_count = 0;
}
/*
* Check for manual override.
*
* The PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK flag must be set, and we
* must have R/C input.
* must have R/C input (NO FAILSAFE!).
* Override is enabled if either the hardcoded channel / value combination
* is selected, or the AP has requested it.
*/
if ((r_setup_arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) &&
(r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK)) {
(r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) &&
!(r_raw_rc_flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE)) {
bool override = false;

28
src/modules/px4iofirmware/protocol.h
Unescape View File

@ -164,10 +164,10 @@ @@ -164,10 +164,10 @@
/* setup page */
#define PX4IO_PAGE_SETUP 50
#define PX4IO_P_SETUP_FEATURES 0
#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /* enable S.Bus v1 output */
#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /* enable S.Bus v2 output */
#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /* enable PWM RSSI parsing */
#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /* enable ADC RSSI parsing */
#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /**< enable S.Bus v1 output */
#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /**< enable S.Bus v2 output */
#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /**< enable PWM RSSI parsing */
#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /**< enable ADC RSSI parsing */
#define PX4IO_P_SETUP_ARMING 1 /* arming controls */
#define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */
@ -201,13 +201,15 @@ enum { /* DSM bind states */ @@ -201,13 +201,15 @@ enum { /* DSM bind states */
dsm_bind_send_pulses,
dsm_bind_reinit_uart
};
/* 8 */
#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */
/* 8 */
#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */
#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */
#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */
#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */
#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */
#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */
#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */
/* 12 occupied by CRC */
#define PX4IO_P_SETUP_RC_THR_FAILSAFE_US 13 /**< the throttle failsafe pulse length in microseconds */
/* autopilot control values, -10000..10000 */
#define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */
@ -217,10 +219,10 @@ enum { /* DSM bind states */ @@ -217,10 +219,10 @@ enum { /* DSM bind states */
#define PX4IO_P_CONTROLS_GROUP_3 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 3) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */
#define PX4IO_P_CONTROLS_GROUP_VALID 64
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /* group 0 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /* group 1 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /* group 2 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /* group 3 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /**< group 0 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /**< group 1 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /**< group 2 is valid / received */
#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /**< group 3 is valid / received */
/* raw text load to the mixer parser - ignores offset */
#define PX4IO_PAGE_MIXERLOAD 52

1
src/modules/px4iofirmware/px4io.h
Unescape View File

@ -108,6 +108,7 @@ extern uint16_t r_page_servo_disarmed[]; /* PX4IO_PAGE_DISARMED_PWM */ @@ -108,6 +108,7 @@ extern uint16_t r_page_servo_disarmed[]; /* PX4IO_PAGE_DISARMED_PWM */
#ifdef CONFIG_ARCH_BOARD_PX4IO_V1
#define r_setup_relays r_page_setup[PX4IO_P_SETUP_RELAYS]
#endif
#define r_setup_rc_thr_failsafe r_page_setup[PX4IO_P_SETUP_RC_THR_FAILSAFE_US];
#define r_control_values (&r_page_controls[0])

1
src/modules/px4iofirmware/registers.c
Unescape View File

@ -169,6 +169,7 @@ volatile uint16_t r_page_setup[] = @@ -169,6 +169,7 @@ volatile uint16_t r_page_setup[] =
[PX4IO_P_SETUP_SET_DEBUG] = 0,
[PX4IO_P_SETUP_REBOOT_BL] = 0,
[PX4IO_P_SETUP_CRC ... (PX4IO_P_SETUP_CRC+1)] = 0,
[PX4IO_P_SETUP_RC_THR_FAILSAFE_US] = 0,
};
#ifdef CONFIG_ARCH_BOARD_PX4IO_V2

Write Preview
Loading…
Cancel
Save