zrzk
/
px4_autopilot
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

SITL: move all models to unified rcS startup and remove old scripts

sbg
Beat Küng 7 years ago committed by Daniel Agar
parent
5ebd0116de
commit
273988c124
51 changed files with 391 additions and 2442 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 30
      ROMFS/px4fmu_common/init.d-posix/1010_iris_opt_flow
  2. 4
      ROMFS/px4fmu_common/init.d-posix/1010_iris_opt_flow.post
  3. 17
      ROMFS/px4fmu_common/init.d-posix/1011_iris_irlock
  4. 14
      ROMFS/px4fmu_common/init.d-posix/1012_iris_rplidar
  5. 16
      ROMFS/px4fmu_common/init.d-posix/1013_iris_vision
  6. 17
      ROMFS/px4fmu_common/init.d-posix/1014_solo
  7. 10
      ROMFS/px4fmu_common/init.d-posix/1020_hippocampus
  8. 42
      ROMFS/px4fmu_common/init.d-posix/1030_plane
  9. 45
      ROMFS/px4fmu_common/init.d-posix/1040_standard_vtol
  10. 47
      ROMFS/px4fmu_common/init.d-posix/1041_tailsitter
  11. 50
      ROMFS/px4fmu_common/init.d-posix/1042_tiltrotor
  12. 38
      ROMFS/px4fmu_common/init.d-posix/1060_rover
  13. 47
      ROMFS/px4fmu_common/init.d-posix/rcS
  14. 4
      ROMFS/px4fmu_common/init.d/rc.fw_apps
  15. 4
      ROMFS/px4fmu_common/init.d/rc.vtol_apps
  16. 5
      ROMFS/px4fmu_common/init.d/rcS
  17. 10
      Tools/sitl_run.sh
  18. 2
      launch/iris_env.sh
  19. 2
      launch/mavros_posix_sitl.launch
  20. 2
      launch/multi_uav_mavros_sitl.launch
  21. 8
      launch/posix_sitl.launch
  22. 5
      launch/single_vehicle_spawn.launch
  23. 41
      posix-configs/SITL/init/ekf2/hippocampus
  24. 83
      posix-configs/SITL/init/ekf2/iris
  25. 85
      posix-configs/SITL/init/ekf2/iris_irlock
  26. 89
      posix-configs/SITL/init/ekf2/iris_opt_flow
  27. 83
      posix-configs/SITL/init/ekf2/iris_rplidar
  28. 88
      posix-configs/SITL/init/ekf2/iris_vision
  29. 82
      posix-configs/SITL/init/ekf2/multiple_iris
  30. 106
      posix-configs/SITL/init/ekf2/plane
  31. 88
      posix-configs/SITL/init/ekf2/rover
  32. 80
      posix-configs/SITL/init/ekf2/solo
  33. 103
      posix-configs/SITL/init/ekf2/standard_vtol
  34. 85
      posix-configs/SITL/init/ekf2/tailsitter
  35. 120
      posix-configs/SITL/init/ekf2/tiltrotor
  36. 93
      posix-configs/SITL/init/ekf2/typhoon_h480
  37. 81
      posix-configs/SITL/init/inav/iris
  38. 83
      posix-configs/SITL/init/inav/iris_opt_flow
  39. 41
      posix-configs/SITL/init/lpe/hippocampus
  40. 84
      posix-configs/SITL/init/lpe/iris
  41. 86
      posix-configs/SITL/init/lpe/iris_1
  42. 86
      posix-configs/SITL/init/lpe/iris_2
  43. 93
      posix-configs/SITL/init/lpe/iris_irlock
  44. 101
      posix-configs/SITL/init/lpe/iris_opt_flow
  45. 83
      posix-configs/SITL/init/lpe/iris_rplidar
  46. 88
      posix-configs/SITL/init/lpe/plane
  47. 84
      posix-configs/SITL/init/lpe/rover
  48. 84
      posix-configs/SITL/init/lpe/solo
  49. 97
      posix-configs/SITL/init/lpe/standard_vtol
  50. 83
      posix-configs/SITL/init/lpe/typhoon_h480
  51. 14
      src/modules/wind_estimator/wind_estimator_main.cpp

30
ROMFS/px4fmu_common/init.d-posix/1010_iris_opt_flow
Unescape View File

@ -0,0 +1,30 @@ @@ -0,0 +1,30 @@
#!nsh
#
# @name 3DR Iris Quadrotor SITL (Optical Flow)
#
# @type Quadrotor Wide
#
sh /etc/init.d-posix/10016_iris
if [ $AUTOCNF == yes ]
then
param set EKF2_AID_MASK 2
param set EKF2_EV_DELAY 5
param set EKF2_EVP_NOISE 0.05
param set EKF2_EVA_NOISE 0.05
param set INAV_LIDAR_EST 1
param set INAV_W_XY_FLOW 1.0
param set INAV_W_XY_GPS_P 0.0
param set INAV_W_XY_GPS_V 0.0
param set INAV_W_Z_GPS_P 0.0
# LPE: Flow-only mode
param set LPE_FUSION 242
param set LPE_FAKE_ORIGIN 1
param set MPC_ALT_MODE 2
fi

4
ROMFS/px4fmu_common/init.d-posix/1010_iris_opt_flow.post
Unescape View File

@ -0,0 +1,4 @@ @@ -0,0 +1,4 @@
mavlink stream -r 10 -s DISTANCE_SENSOR -u $udp_gcs_port_local
mavlink stream -r 10 -s VISION_POSITION_ESTIMATE -u $udp_gcs_port_local

17
ROMFS/px4fmu_common/init.d-posix/1011_iris_irlock
Unescape View File

@ -0,0 +1,17 @@ @@ -0,0 +1,17 @@
#!nsh
#
# @name 3DR Iris Quadrotor SITL (irlock)
#
# @type Quadrotor Wide
#
sh /etc/init.d-posix/10016_iris
if [ $AUTOCNF == yes ]
then
# enable fusion of landing target velocity
param set LTEST_MODE 1
param set PLD_HACC_RAD 0.1
fi

14
ROMFS/px4fmu_common/init.d-posix/1012_iris_rplidar
Unescape View File

@ -0,0 +1,14 @@ @@ -0,0 +1,14 @@
#!nsh
#
# @name 3DR Iris Quadrotor SITL (rplidar)
#
# @type Quadrotor Wide
#
sh /etc/init.d-posix/10016_iris
if [ $AUTOCNF == yes ]
then
param set LPE_FUSION 242
fi

16
ROMFS/px4fmu_common/init.d-posix/1013_iris_vision
Unescape View File

@ -0,0 +1,16 @@ @@ -0,0 +1,16 @@
#!nsh
#
# @name 3DR Iris Quadrotor SITL (Vision)
#
# @type Quadrotor Wide
#
sh /etc/init.d-posix/1010_iris_opt_flow
if [ $AUTOCNF == yes ]
then
param set EKF2_AID_MASK 8
param set EKF2_EV_DELAY 5
fi

17
ROMFS/px4fmu_common/init.d-posix/1014_solo
Unescape View File

@ -0,0 +1,17 @@ @@ -0,0 +1,17 @@
#!nsh
#
# @name Solo
#
# @type Quadrotor
#
sh /etc/init.d/rc.mc_defaults
if [ $AUTOCNF == yes ]
then
param set MC_PITCHRATE_P 0.15
param set MC_ROLLRATE_P 0.15
fi
set MIXER quad_x

10
ROMFS/px4fmu_common/init.d-posix/1020_hippocampus
Unescape View File

@ -0,0 +1,10 @@ @@ -0,0 +1,10 @@
#!nsh
#
# @name Hippocampus UUV
#
sh /etc/init.d/rc.mc_defaults
set MIXER uuv_quad_x

42
ROMFS/px4fmu_common/init.d-posix/1030_plane
Unescape View File

@ -0,0 +1,42 @@ @@ -0,0 +1,42 @@
#!nsh
#
# @name Plane SITL
#
sh /etc/init.d/rc.fw_defaults
if [ $AUTOCNF == yes ]
then
param set MAV_TYPE 1
param set EKF2_ARSP_THR 8.0
param set EKF2_FUSE_BETA 1
param set EKF2_MAG_ACCLIM 0
param set EKF2_MAG_YAWLIM 0
param set FW_LND_ANG 8
param set FW_P_TC 0.5
param set FW_PR_FF 0.40
param set FW_PR_I 0.05
param set FW_PR_P 0.05
param set FW_R_TC 0.7
param set FW_RR_FF 0.20
param set FW_RR_I 0.02
param set FW_RR_P 0.22
param set FW_THR_IDLE 0.15
param set FW_W_EN 1
param set MIS_LTRMIN_ALT 30
param set MIS_TAKEOFF_ALT 30
param set NAV_ACC_RAD 15.0
param set NAV_DLL_ACT 2
param set NAV_LOITER_RAD 50
param set RWTO_TKOFF 1
param set WEST_EN 1
fi
set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
set MIXER custom

45
ROMFS/px4fmu_common/init.d-posix/1040_standard_vtol
Unescape View File

@ -0,0 +1,45 @@ @@ -0,0 +1,45 @@
#!nsh
#
# @name Standard VTOL
#
# @type Standard VTOL
#
sh /etc/init.d/rc.vtol_defaults
if [ $AUTOCNF == yes ]
then
param set MAV_TYPE 22
param set FW_AIRSPD_MAX 25
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set MC_ROLLRATE_P 0.3
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set MPC_ACC_HOR_MAX 2
param set MPC_ACC_HOR_MAX 2.0
param set MPC_THR_MIN 0.1
param set MPC_TKO_SPEED 1.0
param set MPC_XY_P 0.8
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.15
param set MPC_Z_VEL_MAX_DN 1.5
param set NAV_ACC_RAD 5.0
param set NAV_LOITER_RAD 80
param set VT_F_TRANS_DUR 5
param set VT_F_TRANS_THR 0.75
param set VT_MOT_COUNT 4
param set VT_TYPE 2
param set WEST_EN 1
fi
set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
set MIXER custom

47
ROMFS/px4fmu_common/init.d-posix/1041_tailsitter
Unescape View File

@ -0,0 +1,47 @@ @@ -0,0 +1,47 @@
#!nsh
#
# @name Quadrotor + Tailsitter
#
# @type VTOL Quad Tailsitter
#
sh /etc/init.d/rc.vtol_defaults
if [ $AUTOCNF == yes ]
then
param set MAV_TYPE 20
param set FW_AIRSPD_MAX 25
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set MC_ROLLRATE_P 0.3
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set MPC_ACC_HOR_MAX 2
param set MPC_ACC_HOR_MAX 2.0
param set MPC_THR_MIN 0.1
param set MPC_TKO_SPEED 1.0
param set MPC_XY_P 0.15
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.05
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.8
param set NAV_ACC_RAD 5.0
param set NAV_LOITER_RAD 80
param set VT_F_TRANS_DUR 1.5
param set VT_F_TRANS_THR 0.7
param set VT_MOT_COUNT 0
param set VT_TYPE 0
param set WEST_EN 1
fi
set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
set MIXER custom

50
ROMFS/px4fmu_common/init.d-posix/1042_tiltrotor
Unescape View File

@ -0,0 +1,50 @@ @@ -0,0 +1,50 @@
#!nsh
#
# @name VTOL Tiltrotor
#
# @type VTOL Tiltrotor
#
sh /etc/init.d/rc.vtol_defaults
if [ $AUTOCNF == yes ]
then
param set MAV_TYPE 21
param set FW_AIRSPD_MAX 25
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set MC_ROLLRATE_P 0.3
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set MPC_ACC_HOR_MAX 2
param set MPC_ACC_HOR_MAX 2.0
param set MPC_THR_MIN 0.1
param set MPC_TKO_SPEED 1.0
param set MPC_XY_P 0.15
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.05
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.8
param set NAV_ACC_RAD 5.0
param set NAV_LOITER_RAD 80
param set VT_F_TRANS_DUR 1.5
param set VT_F_TRANS_THR 0.75
param set VT_MOT_COUNT 4
param set VT_TILT_FW 3.1415
param set VT_TILT_TRANS 1.2
param set VT_TYPE 1
param set WEST_EN 1
fi
set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
set MIXER custom

38
ROMFS/px4fmu_common/init.d-posix/1060_rover
Unescape View File

@ -0,0 +1,38 @@ @@ -0,0 +1,38 @@
#!nsh
#
# @name Rover
#
sh /etc/init.d/rc.ugv_defaults
if [ $AUTOCNF == yes ]
then
param set MAV_TYPE 10
param set GND_L1_DIST 5
param set GND_SP_CTRL_MODE 1
param set GND_SPEED_D 3
param set GND_SPEED_I 0.001
param set GND_SPEED_IMAX 0.125
param set GND_SPEED_P 0.25
param set GND_SPEED_THR_SC 1
param set GND_THR_CRUISE 0.3
param set GND_THR_IDLE 0
param set GND_THR_MAX 0.5
param set GND_THR_MIN 0
param set GND_SPEED_TRIM 4
param set GND_WR_D 1.2
param set GND_WR_I 0.9674
param set GND_WR_IMAX 0.1
param set GND_WR_P 2
param set MIS_LTRMIN_ALT 0.01
param set MIS_TAKEOFF_ALT 0.01
param set NAV_ACC_RAD 0.5
param set NAV_LOITER_RAD 2
param set CBRK_AIRSPD_CHK 162128
fi
set MIXER_FILE etc/mixers-sitl/rover_sitl.main.mix

47
ROMFS/px4fmu_common/init.d-posix/rcS
Unescape View File

@ -4,8 +4,9 @@ @@ -4,8 +4,9 @@
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
#
# Main SITL startup script
#
# check for ekf2 replay
if [ "$replay_mode" == "ekf2" ]
@ -21,6 +22,7 @@ set LOG_FILE bootlog.txt @@ -21,6 +22,7 @@ set LOG_FILE bootlog.txt
set MAV_TYPE none
set MIXER none
set MIXER_AUX none
set MIXER_FILE none
set OUTPUT_MODE sim
set PWM_OUT none
set SDCARD_MIXERS_PATH etc/mixers
@ -34,6 +36,28 @@ if [ "$PX4_SIM_MODEL" == "shell" ]; then @@ -34,6 +36,28 @@ if [ "$PX4_SIM_MODEL" == "shell" ]; then
set RUN_MINIMAL_SHELL yes
elif [ "$PX4_SIM_MODEL" == "iris" ]; then
set REQUESTED_AUTOSTART 10016
elif [ "$PX4_SIM_MODEL" == "iris_opt_flow" ]; then
set REQUESTED_AUTOSTART 1010
elif [ "$PX4_SIM_MODEL" == "iris_irlock" ]; then
set REQUESTED_AUTOSTART 1011
elif [ "$PX4_SIM_MODEL" == "iris_rplidar" ]; then
set REQUESTED_AUTOSTART 1012
elif [ "$PX4_SIM_MODEL" == "iris_vision" ]; then
set REQUESTED_AUTOSTART 1013
elif [ "$PX4_SIM_MODEL" == "solo" ]; then
set REQUESTED_AUTOSTART 1014
elif [ "$PX4_SIM_MODEL" == "hippocampus" ]; then
set REQUESTED_AUTOSTART 1020
elif [ "$PX4_SIM_MODEL" == "plane" ]; then
set REQUESTED_AUTOSTART 1030
elif [ "$PX4_SIM_MODEL" == "standard_vtol" ]; then
set REQUESTED_AUTOSTART 1040
elif [ "$PX4_SIM_MODEL" == "tailsitter" ]; then
set REQUESTED_AUTOSTART 1041
elif [ "$PX4_SIM_MODEL" == "tiltrotor" ]; then
set REQUESTED_AUTOSTART 1042
elif [ "$PX4_SIM_MODEL" == "rover" ]; then
set REQUESTED_AUTOSTART 1060
elif [ "$PX4_SIM_MODEL" == "typhoon_h480" ]; then
set REQUESTED_AUTOSTART 6011
else
@ -96,6 +120,8 @@ then @@ -96,6 +120,8 @@ then
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set SENS_DPRES_OFF 0.001
param set CBRK_AIRSPD_CHK 0
param set COM_DISARM_LAND 3
param set COM_OBL_ACT 2
@ -114,6 +140,7 @@ then @@ -114,6 +140,7 @@ then
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MIS_TAKEOFF_ALT 2.5
param set MPC_ALT_MODE 0
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
@ -127,6 +154,11 @@ then @@ -127,6 +154,11 @@ then
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_RESTART_TYPE 2
# LPE: GPS only mode
param set LPE_FUSION 145
param set WEST_EN 0
fi
# Autostart ID
@ -153,6 +185,10 @@ sensors start @@ -153,6 +185,10 @@ sensors start
commander start
navigator start
if param compare WEST_EN 1
then
wind_estimator start
fi
if ! param compare MNT_MODE_IN -1
then
@ -166,6 +202,15 @@ then @@ -166,6 +202,15 @@ then
camera_feedback start
fi
if [ ${VEHICLE_TYPE} == fw -o ${VEHICLE_TYPE} == vtol ]
then
if param compare CBRK_AIRSPD_CHK 0
then
measairspeedsim start
fi
fi
# Configure vehicle type specific parameters.
# Note: rc.vehicle_setup is the entry point for rc.interface,
# rc.fw_apps, rc.mc_apps, rc.ugv_apps, and rc.vtol_apps.

4
ROMFS/px4fmu_common/init.d/rc.fw_apps
Unescape View File

@ -29,7 +29,3 @@ fw_pos_control_l1 start @@ -29,7 +29,3 @@ fw_pos_control_l1 start
#
land_detector start fixedwing
#
# Start Wind and Airspeed Scale Estimator.
#
#wind_estimator start

4
ROMFS/px4fmu_common/init.d/rc.vtol_apps
Unescape View File

@ -55,7 +55,3 @@ fw_pos_control_l1 start @@ -55,7 +55,3 @@ fw_pos_control_l1 start
#
land_detector start vtol
#
# Start Wind and Airspeed Scale Estimator
#
#wind_estimator start

5
ROMFS/px4fmu_common/init.d/rcS
Unescape View File

@ -486,7 +486,10 @@ else @@ -486,7 +486,10 @@ else
#
# Start the standalone wind estimator.
#
wind_estimator start
if param compare WEST_EN 1
then
wind_estimator start
fi
#
# Start a thermal calibration if required.

10
Tools/sitl_run.sh
Unescape View File

@ -98,16 +98,10 @@ pushd "$rootfs" >/dev/null @@ -98,16 +98,10 @@ pushd "$rootfs" >/dev/null
# Do not exit on failure now from here on because we want the complete cleanup
set +e
# Use the new unified rcS for the supported models
# (All models will be transitioned over)
if [[ ($rcS_path == posix-configs/SITL/init/ekf2 || $rcS_path == posix-configs/SITL/init/lpe)
&& ($model == "iris" || $model == "typhoon_h480") ]]; then
echo "Using new unified rcS for $model"
sitl_command="$sitl_bin $no_pxh $src_path/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -t $src_path/test_data"
elif [[ ${model} == tests* ]]; then
if [[ ${model} == tests* ]]; then
sitl_command="$sitl_bin $no_pxh $src_path/ROMFS/px4fmu_test -s ${src_path}/${rcS_path}/${model} -t $src_path/test_data"
else
sitl_command="$sitl_bin $no_pxh $src_path/ROMFS/px4fmu_common -s ${src_path}/${rcS_path}/${model} -t $src_path/test_data"
sitl_command="$sitl_bin $no_pxh $src_path/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -t $src_path/test_data"
fi
echo SITL COMMAND: $sitl_command

2
launch/iris_env.sh
Unescape View File

@ -1,2 +0,0 @@ @@ -1,2 +0,0 @@
#!/bin/bash
export PX4_SIM_MODEL="iris"

2
launch/mavros_posix_sitl.launch
Unescape View File

@ -14,7 +14,6 @@ @@ -14,7 +14,6 @@
<arg name="vehicle" default="iris"/>
<arg name="world" default="$(find mavlink_sitl_gazebo)/worlds/empty.world"/>
<arg name="sdf" default="$(find mavlink_sitl_gazebo)/models/$(arg vehicle)/$(arg vehicle).sdf"/>
<arg name="rcS" default="$(find px4)/posix-configs/SITL/init/$(arg est)/$(arg vehicle)"/>
<!-- gazebo configs -->
<arg name="gui" default="true"/>
@ -38,7 +37,6 @@ @@ -38,7 +37,6 @@
<arg name="world" value="$(arg world)"/>
<arg name="vehicle" value="$(arg vehicle)"/>
<arg name="sdf" value="$(arg sdf)"/>
<arg name="rcS" value="$(arg rcS)"/>
<arg name="gui" value="$(arg gui)"/>
<arg name="interactive" value="$(arg interactive)"/>
<arg name="debug" value="$(arg debug)"/>

2
launch/multi_uav_mavros_sitl.launch
Unescape View File

@ -33,7 +33,6 @@ @@ -33,7 +33,6 @@
<arg name="P" value="0"/>
<arg name="Y" value="0"/>
<arg name="vehicle" value="$(arg vehicle)"/>
<arg name="rcS" value="$(find px4)/posix-configs/SITL/init/$(arg est)/$(arg vehicle)_$(arg ID)"/>
<arg name="mavlink_udp_port" value="14561"/>
<arg name="ID" value="$(arg ID)"/>
</include>
@ -59,7 +58,6 @@ @@ -59,7 +58,6 @@
<arg name="P" value="0"/>
<arg name="Y" value="0"/>
<arg name="vehicle" value="$(arg vehicle)"/>
<arg name="rcS" value="$(find px4)/posix-configs/SITL/init/$(arg est)/$(arg vehicle)_$(arg ID)"/>
<arg name="mavlink_udp_port" value="14562"/>
<arg name="ID" value="$(arg ID)"/>
</include>

8
launch/posix_sitl.launch
Unescape View File

@ -14,7 +14,8 @@ @@ -14,7 +14,8 @@
<arg name="vehicle" default="iris"/>
<arg name="world" default="$(find mavlink_sitl_gazebo)/worlds/empty.world"/>
<arg name="sdf" default="$(find mavlink_sitl_gazebo)/models/$(arg vehicle)/$(arg vehicle).sdf"/>
<arg name="rcS" default="$(find px4)/posix-configs/SITL/init/$(arg est)/$(arg vehicle)"/>
<env name="PX4_SIM_MODEL" value="$(arg vehicle)" />
<env name="PX4_ESTIMATOR" value="$(arg est)" />
<!-- gazebo configs -->
<arg name="gui" default="true"/>
@ -28,7 +29,7 @@ @@ -28,7 +29,7 @@
<arg unless="$(arg interactive)" name="px4_command_arg1" value="-d"/>
<arg if="$(arg interactive)" name="px4_command_arg1" value=""/>
<node name="sitl" pkg="px4" type="px4" output="screen"
args="$(find px4)/ROMFS/px4fmu_common -s $(arg rcS) $(arg px4_command_arg1)" required="true"/>
args="$(find px4)/ROMFS/px4fmu_common -s etc/init.d-posix/rcS $(arg px4_command_arg1)" required="true"/>
<!-- Gazebo sim -->
<include file="$(find gazebo_ros)/launch/empty_world.launch">
@ -41,8 +42,5 @@ @@ -41,8 +42,5 @@
</include>
<!-- gazebo model -->
<node name="$(anon vehicle_spawn)" pkg="gazebo_ros" type="spawn_model" output="screen" args="-sdf -file $(arg sdf) -model $(arg vehicle) -x $(arg x) -y $(arg y) -z $(arg z) -R $(arg R) -P $(arg P) -Y $(arg Y)"/>
<!-- This will set the environment variable needed to select iris in the startup. -->
<machine name="px4" env-loader="iris_env.sh" address="none" />
</launch>

5
launch/single_vehicle_spawn.launch
Unescape View File

@ -13,7 +13,8 @@ @@ -13,7 +13,8 @@
<arg name="est" default="ekf2"/>
<arg name="vehicle" default="iris"/>
<arg name="ID" default="1"/>
<arg name="rcS" default="$(find px4)/posix-configs/SITL/init/$(arg est)/$(arg vehicle)_$(arg ID)"/>
<env name="PX4_SIM_MODEL" value="$(arg vehicle)" />
<env name="PX4_ESTIMATOR" value="$(arg est)" />
<arg name="mavlink_udp_port" default="14560"/>
<!-- PX4 configs -->
<arg name="interactive" default="true"/>
@ -23,7 +24,7 @@ @@ -23,7 +24,7 @@
<!-- PX4 SITL -->
<arg unless="$(arg interactive)" name="px4_command_arg1" value=""/>
<arg if="$(arg interactive)" name="px4_command_arg1" value="-d"/>
<node name="sitl_$(arg ID)" pkg="px4" type="px4" output="screen" args="$(find px4)/ROMFS/px4fmu_common -s $(arg rcS) -i $(arg ID) $(arg px4_command_arg1)">
<node name="sitl_$(arg ID)" pkg="px4" type="px4" output="screen" args="$(find px4)/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -i $(arg ID) $(arg px4_command_arg1)">
</node>
<!-- spawn vehicle -->
<node name="$(arg vehicle)_$(arg ID)_spawn" output="screen" pkg="gazebo_ros" type="spawn_model" args="-urdf -param rotors_description -model $(arg vehicle)_$(arg ID) -package_to_model -x $(arg x) -y $(arg y) -z $(arg z) -R $(arg R) -P $(arg P) -Y $(arg Y)"/>

41
posix-configs/SITL/init/ekf2/hippocampus
Unescape View File

@ -1,41 +0,0 @@ @@ -1,41 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set COM_DISARM_LAND 0
param set MAV_TYPE 3
param set SDLOG_DIRS_MAX 7
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
dataman start
simulator start -s
pwm_out_sim start
mixer load /dev/pwm_output0 etc/mixers/uuv_quad_x.mix
gyrosim start
accelsim start
barosim start
gpssim start
sleep 1
sensors start
commander start
ekf2 start
mavlink start -u 14556 -r 4000000
mavlink start -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
logger start -r 100 -e
mavlink boot_complete

83
posix-configs/SITL/init/ekf2/iris
Unescape View File

@ -1,83 +0,0 @@ @@ -1,83 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 3
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set COM_OF_LOSS_T 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 2
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 4010
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

85
posix-configs/SITL/init/ekf2/iris_irlock
Unescape View File

@ -1,85 +0,0 @@ @@ -1,85 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 3
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set COM_OF_LOSS_T 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 2
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 4010
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
landing_target_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -u 14556 -r 4000000
mavlink start -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

89
posix-configs/SITL/init/ekf2/iris_opt_flow
Unescape View File

@ -1,89 +0,0 @@ @@ -1,89 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 2
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set SDLOG_DIRS_MAX 7
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set EKF2_AID_MASK 2
param set EKF2_HGT_MODE 0
param set EKF2_EV_DELAY 5
param set EKF2_EVP_NOISE 0.05
param set EKF2_EVA_NOISE 0.05
param set MPC_ALT_MODE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
mavlink stream -r 10 -s DISTANCE_SENSOR -u 14556
mavlink stream -r 10 -s VISION_POSITION_ESTIMATE -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

83
posix-configs/SITL/init/ekf2/iris_rplidar
Unescape View File

@ -1,83 +0,0 @@ @@ -1,83 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 3
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set COM_OF_LOSS_T 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 2
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 4010
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

88
posix-configs/SITL/init/ekf2/iris_vision
Unescape View File

@ -1,88 +0,0 @@ @@ -1,88 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 2
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set SDLOG_DIRS_MAX 7
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set EKF2_AID_MASK 8
param set EKF2_HGT_MODE 0
param set EKF2_EV_DELAY 5
param set EKF2_EVP_NOISE 0.05
param set EKF2_EVA_NOISE 0.05
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
mavlink stream -r 10 -s DISTANCE_SENSOR -u 14556
mavlink stream -r 10 -s VISION_POSITION_ESTIMATE -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

82
posix-configs/SITL/init/ekf2/multiple_iris
Unescape View File

@ -1,82 +0,0 @@ @@ -1,82 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 3
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set COM_OF_LOSS_T 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 2
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 4010
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s -u _SIMPORT_
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u _MAVPORT_ -r 4000000 -o _MAVOPORT_
mavlink start -x -u _MAVPORT2_ -r 4000000 -m onboard -o _MAVOPORT2_
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u _MAVPORT_
mavlink stream -r 50 -s LOCAL_POSITION_NED -u _MAVPORT_
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u _MAVPORT_
mavlink stream -r 50 -s ATTITUDE -u _MAVPORT_
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u _MAVPORT_
mavlink stream -r 50 -s ATTITUDE_TARGET -u _MAVPORT_
mavlink stream -r 20 -s RC_CHANNELS -u _MAVPORT_
mavlink stream -r 250 -s HIGHRES_IMU -u _MAVPORT_
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u _MAVPORT_
logger start -e -t
mavlink boot_complete
replay trystart

106
posix-configs/SITL/init/ekf2/plane
Unescape View File

@ -1,106 +0,0 @@ @@ -1,106 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_POS_FS_DELAY 5
param set COM_POS_FS_EPH 25
param set COM_POS_FS_EPV 50
param set COM_POS_FS_GAIN 0
param set COM_POS_FS_PROB 1
param set COM_RC_IN_MODE 1
param set COM_VEL_FS_EVH 5
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_ARSP_THR 8.0
param set EKF2_FUSE_BETA 1
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_ACCLIM 0
param set EKF2_MAG_TYPE 1
param set EKF2_MAG_YAWLIM 0
param set FW_LND_ANG 8
param set FW_P_TC 0.5
param set FW_PR_FF 0.40
param set FW_PR_I 0.05
param set FW_PR_P 0.05
param set FW_R_TC 0.7
param set FW_RR_FF 0.20
param set FW_RR_I 0.02
param set FW_RR_P 0.22
param set FW_THR_IDLE 0.15
param set FW_W_EN 1
param set MAV_TYPE 1
param set MIS_LTRMIN_ALT 30
param set MIS_TAKEOFF_ALT 30
param set NAV_ACC_RAD 15.0
param set NAV_DLL_ACT 2
param set NAV_LOITER_RAD 50
param set RWTO_TKOFF 1
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 3033
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
navigator start
ekf2 start
fw_pos_control_l1 start
fw_att_control start
land_detector start fixedwing
wind_estimator start
mixer load /dev/pwm_output0 etc/mixers-sitl/plane_sitl.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

88
posix-configs/SITL/init/ekf2/rover
Unescape View File

@ -1,88 +0,0 @@ @@ -1,88 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_RC_IN_MODE 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_MAG_TYPE 1
param set GND_L1_DIST 5
param set GND_SP_CTRL_MODE 1
param set GND_SPEED_D 3
param set GND_SPEED_I 0.001
param set GND_SPEED_IMAX 0.125
param set GND_SPEED_P 0.25
param set GND_SPEED_THR_SC 1
param set GND_THR_CRUISE 0.3
param set GND_THR_IDLE 0
param set GND_THR_MAX 0.5
param set GND_THR_MIN 0
param set GND_SPEED_TRIM 4
param set GND_WR_D 1.2
param set GND_WR_I 0.9674
param set GND_WR_IMAX 0.1
param set GND_WR_P 2
param set MAV_TYPE 10
param set MIS_LTRMIN_ALT 0.01
param set MIS_TAKEOFF_ALT 0.01
param set NAV_ACC_RAD 0.5
param set NAV_DLL_ACT 0
param set NAV_LOITER_RAD 2
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SDLOG_DIRS_MAX 7
param set SYS_AUTOSTART 50002
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sleep 1
sensors start
commander start
land_detector start ugv
navigator start
ekf2 start
gnd_pos_control start
gnd_att_control start
mixer load /dev/pwm_output0 etc/mixers-sitl/rover_sitl.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

80
posix-configs/SITL/init/ekf2/solo
Unescape View File

@ -1,80 +0,0 @@ @@ -1,80 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 3
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 2
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.15
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.15
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 4010
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_x.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

103
posix-configs/SITL/init/ekf2/standard_vtol
Unescape View File

@ -1,103 +0,0 @@ @@ -1,103 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set FW_AIRSPD_MAX 25
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set MAV_TYPE 22
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.3
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set MPC_ACC_HOR_MAX 2
param set MPC_ACC_HOR_MAX 2.0
param set MPC_THR_MIN 0.1
param set MPC_TKO_SPEED 1.0
param set MPC_XY_P 0.8
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.15
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 5.0
param set NAV_DLL_ACT 2
param set NAV_LOITER_RAD 80
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 13006
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
param set VT_F_TRANS_THR 0.75
param set VT_MOT_COUNT 4
param set VT_TYPE 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
land_detector start vtol
navigator start
ekf2 start
vtol_att_control start
mc_pos_control start
mc_att_control start
fw_pos_control_l1 start
fw_att_control start
wind_estimator start
mixer load /dev/pwm_output0 etc/mixers-sitl/standard_vtol_sitl.main.mix
mavlink start -x -u 14556 -r 2000000 -f
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540 -f
mavlink stream -r 20 -s EXTENDED_SYS_STATE -u 14557
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

85
posix-configs/SITL/init/ekf2/tailsitter
Unescape View File

@ -1,85 +0,0 @@ @@ -1,85 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 20
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.2
param set MPC_XY_P 0.15
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_P 0.05
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.8
param set MPC_LAND_SPEED 1.5
param set NAV_DLL_ACT 2
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 13003
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
param set VT_TYPE 0
param set VT_F_TRANS_DUR 1.5
param set VT_F_TRANS_THR 0.7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
land_detector start vtol
navigator start
ekf2 start
vtol_att_control start
mc_pos_control start
mc_att_control start
fw_pos_control_l1 start
fw_att_control start
wind_estimator start
mixer load /dev/pwm_output0 etc/mixers-sitl/quad_x_vtol.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

120
posix-configs/SITL/init/ekf2/tiltrotor
Unescape View File

@ -1,120 +0,0 @@ @@ -1,120 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_DISARM_LAND 5
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set FW_AIRSPD_MAX 25
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set MAV_TYPE 21
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.2
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.3
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set MPC_ACC_HOR_MAX 2
param set MPC_ACC_HOR_MAX 2.0
param set MPC_TKO_SPEED 1.0
param set MPC_XY_P 0.8
param set MPC_XY_VEL_D 0.005
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.15
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 5.0
param set NAV_DLL_ACT 2
param set NAV_LOITER_RAD 80
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 13012
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
param set VT_MOT_COUNT 4
param set VT_F_TRANS_THR 0.75
param set VT_TYPE 1
param set VT_TILT_FW 3.1415
param set VT_TILT_TRANS 1.2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
land_detector start vtol
navigator start
ekf2 start
vtol_att_control start
mc_pos_control start
mc_att_control start
fw_pos_control_l1 start
fw_att_control start
wind_estimator start
mixer load /dev/pwm_output0 etc/mixers-sitl/tiltrotor_sitl.main.mix
mavlink start -x -u 14556 -r 2000000 -f
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540 -f
mavlink stream -r 20 -s EXTENDED_SYS_STATE -u 14557
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

93
posix-configs/SITL/init/ekf2/typhoon_h480
Unescape View File

@ -1,93 +0,0 @@ @@ -1,93 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.001
param set CAL_ACC0_XSCALE 1.0001
param set CAL_ACC0_YOFF -0.001
param set CAL_ACC0_YSCALE 1.0001
param set CAL_ACC0_ZOFF 0.001
param set CAL_ACC0_ZSCALE 1.0001
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.001
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.001
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.001
param set COM_DISARM_LAND 3
param set COM_RC_IN_MODE 1
param set EKF2_AID_MASK 1
param set EKF2_ANGERR_INIT 0.01
param set EKF2_GBIAS_INIT 0.01
param set EKF2_HGT_MODE 0
param set EKF2_MAG_TYPE 1
param set MAV_TYPE 13
param set MC_PITCH_P 6
param set MC_PITCHRATE_P 0.1
param set MC_ROLL_P 6
param set MC_ROLLRATE_P 0.05
param set MIS_TAKEOFF_ALT 2.5
param set MPC_HOLD_MAX_Z 2.0
param set MPC_XY_VEL_I 0.2
param set MPC_XY_VEL_P 0.15
param set MPC_Z_VEL_I 0.15
param set MPC_Z_VEL_P 0.6
param set NAV_ACC_RAD 2.0
param set NAV_DLL_ACT 2
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set RTL_RETURN_ALT 30.0
param set SDLOG_DIRS_MAX 7
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SYS_AUTOSTART 6001
param set SYS_MC_EST_GROUP 2
param set SYS_RESTART_TYPE 2
param set TRIG_INTERFACE 3
param set TRIG_MODE 4
param set MNT_MODE_IN 0
param set MAV_PROTO_VER 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
ekf2 start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/hexa_x.main.mix
mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
mavlink stream -r 10 -s MOUNT_ORIENTATION -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14557
mavlink stream -r 10 -s MOUNT_ORIENTATION -u 14557
logger start -e -t
vmount start
camera_trigger start
mavlink boot_complete
replay trystart

81
posix-configs/SITL/init/inav/iris
Unescape View File

@ -1,81 +0,0 @@ @@ -1,81 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set MC_PITCHRATE_P 0.15
param set MC_ROLLRATE_P 0.15
param set MC_YAW_P 2.0
param set MC_YAWRATE_P 0.35
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 0
dataman start
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set MPC_XY_P 0.4
param set MPC_XY_VEL_P 0.2
param set MPC_XY_VEL_D 0.005
param set MPP_XY_P 1.0
param set MPP_XY_FF 0.0
param set MPP_XY_VEL_P 0.01
param set MPP_XY_VEL_I 0.0
param set MPP_XY_VEL_D 0.01
param set MPP_XY_VEL_MAX 2.0
param set MPP_Z_VEL_P 0.3
param set MPP_Z_P 2
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set MP_ROLL_P 3
param set MP_ROLLRATE_P 0.3
param set MP_ROLLRATE_I 0.001
param set MP_ROLLRATE_D 0.001
param set MP_PITCH_P 4
param set MP_PITCHRATE_P 0.3
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
position_estimator_inav start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_x.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

83
posix-configs/SITL/init/inav/iris_opt_flow
Unescape View File

@ -1,83 +0,0 @@ @@ -1,83 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 0
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 12.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.3
param set MC_PITCHRATE_P 0.3
param set MC_PITCH_P 5.5
param set MC_ROLL_P 5.5
param set MC_ROLLRATE_I 0.1
param set MC_PITCHRATE_I 0.1
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.8
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.15
param set MPC_XY_VEL_I 0.2
param set INAV_LIDAR_EST 1
param set INAV_W_XY_FLOW 1.0
param set INAV_W_XY_GPS_P 0.0
param set INAV_W_XY_GPS_V 0.0
param set INAV_W_Z_GPS_P 0.0
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
position_estimator_inav start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

41
posix-configs/SITL/init/lpe/hippocampus
Unescape View File

@ -1,41 +0,0 @@ @@ -1,41 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set COM_DISARM_LAND 0
param set MAV_TYPE 3
param set SDLOG_DIRS_MAX 7
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
dataman start
simulator start -s
pwm_out_sim start
mixer load /dev/pwm_output0 etc/mixers/uuv_quad_x.mix
gyrosim start
accelsim start
barosim start
sleep 1
sensors start
commander start
attitude_estimator_q start
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
logger start -r 100 -e
mavlink boot_complete

84
posix-configs/SITL/init/lpe/iris
Unescape View File

@ -1,84 +0,0 @@ @@ -1,84 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

86
posix-configs/SITL/init/lpe/iris_1
Unescape View File

@ -1,86 +0,0 @@ @@ -1,86 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_SYS_ID 1
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SITL_UDP_PRT 14560
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

86
posix-configs/SITL/init/lpe/iris_2
Unescape View File

@ -1,86 +0,0 @@ @@ -1,86 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_SYS_ID 2
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SITL_UDP_PRT 14562
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14558 -r 4000000
mavlink start -x -u 14559 -r 4000000 -m onboard -o 14541
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14558
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14558
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14558
mavlink stream -r 50 -s ATTITUDE -u 14558
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14558
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14558
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14558
mavlink stream -r 20 -s RC_CHANNELS -u 14558
mavlink stream -r 250 -s HIGHRES_IMU -u 14558
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14558
logger start -e -t
mavlink boot_complete
replay trystart

93
posix-configs/SITL/init/lpe/iris_irlock
Unescape View File

@ -1,93 +0,0 @@ @@ -1,93 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.13
param set MPC_XY_P 1.2
param set MC_PITCHRATE_MAX 150
param set MC_ROLLRATE_MAX 150
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
param set LPE_EPH_MAX 5
# enable fusion of landing target velocity
param set LTEST_MODE 1
param set PLD_HACC_RAD 0.1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
landing_target_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -u 14556 -r 4000000
mavlink start -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

101
posix-configs/SITL/init/lpe/iris_opt_flow
Unescape View File

@ -1,101 +0,0 @@ @@ -1,101 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.3
param set MC_PITCHRATE_P 0.3
param set MC_PITCH_P 5.5
param set MC_ROLL_P 5.5
param set MC_ROLLRATE_I 0.1
param set MC_PITCHRATE_I 0.1
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.8
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.15
param set MPC_XY_VEL_I 0.2
param set SDLOG_DIRS_MAX 7
# changes for optical flow navigation
param set MC_PITCH_P 5.0
param set MC_ROLL_P 5.0
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_ROLLRATE_I 0.05
param set MC_PITCHRATE_I 0.05
param set MPC_ALT_MODE 1
param set LPE_T_MAX_GRADE 0
param set MPC_XY_VEL_MAX 2
param set MPC_Z_VEL_MAX_DN 2
param set MPC_TILTMAX_AIR 10
param set MPC_TILTMAX_LND 10
param set MPC_XY_P 0.5
param set MIS_TAKEOFF_ALT 2
param set NAV_ACC_RAD 1.0
param set CBRK_GPSFAIL 240024
# Flow-only mode
param set LPE_FUSION 242
param set LPE_FAKE_ORIGIN 1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

83
posix-configs/SITL/init/lpe/iris_rplidar
Unescape View File

@ -1,83 +0,0 @@ @@ -1,83 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set LPE_FUSION 242
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
rgbledsim start
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sleep 1
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

88
posix-configs/SITL/init/lpe/plane
Unescape View File

@ -1,88 +0,0 @@ @@ -1,88 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 1
param set SYS_AUTOSTART 3033
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_DPRES_OFF 0.001
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set NAV_ACC_RAD 15.0
param set NAV_LOITER_RAD 50
param set MIS_LTRMIN_ALT 30
param set MIS_TAKEOFF_ALT 30
param set SDLOG_DIRS_MAX 7
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set FW_THR_IDLE 0.15
param set FW_LND_ANG 8
param set FW_R_TC 0.7
param set FW_RR_FF 0.20
param set FW_RR_I 0.02
param set FW_RR_P 0.22
param set FW_P_TC 0.5
param set FW_PR_FF 0.40
param set FW_PR_I 0.05
param set FW_PR_P 0.05
param set FW_W_EN 1
param set RWTO_TKOFF 1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
navigator start
local_position_estimator start
fw_pos_control_l1 start
fw_att_control start
land_detector start fixedwing
mixer load /dev/pwm_output0 etc/mixers-sitl/plane_sitl.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

84
posix-configs/SITL/init/lpe/rover
Unescape View File

@ -1,84 +0,0 @@ @@ -1,84 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_RC_IN_MODE 1
param set GND_L1_DIST 5
param set GND_SP_CTRL_MODE 0
param set GND_SPEED_D 3
param set GND_SPEED_I 0.001
param set GND_SPEED_IMAX 0.125
param set GND_SPEED_P 0.25
param set GND_SPEED_THR_SC 1
param set GND_THR_CRUISE 0.3
param set GND_THR_IDLE 0
param set GND_THR_MAX 1
param set GND_THR_MIN 0
param set GND_WR_D 1.2
param set GND_WR_I 0.9674
param set GND_WR_IMAX 0.1
param set GND_WR_P 2
param set MAV_TYPE 10
param set MIS_LTRMIN_ALT 0.01
param set MIS_TAKEOFF_ALT 0.01
param set NAV_ACC_RAD 0.5
param set NAV_DLL_ACT 0
param set NAV_LOITER_RAD 2
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 50002
param set SYS_MC_EST_GROUP 1
param set SYS_RESTART_TYPE 2
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sleep 1
sensors start
commander start
land_detector start ugv
navigator start
ekf2 start
gnd_pos_control start
gnd_att_control start
mixer load /dev/pwm_output0 etc/mixers-sitl/rover_sitl.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

84
posix-configs/SITL/init/lpe/solo
Unescape View File

@ -1,84 +0,0 @@ @@ -1,84 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SDLOG_DIRS_MAX 7
param set LPE_FUSION 247
# 11110111 no vis yaw (1 << 3)
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_x.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

97
posix-configs/SITL/init/lpe/standard_vtol
Unescape View File

@ -1,97 +0,0 @@ @@ -1,97 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 22
param set VT_TYPE 2
param set VT_MOT_COUNT 4
param set VT_F_TRANS_THR 0.75
param set SYS_AUTOSTART 13006
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set MC_ROLLRATE_P 0.3
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_XY_P 0.5
param set MPC_ACC_HOR_MAX 1.0
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.1
param set MPC_XY_VEL_D 0.005
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set FW_AIRSPD_MAX 25
param set SENS_BOARD_ROT 0
param set SENS_DPRES_OFF 0.001
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set NAV_ACC_RAD 5.0
param set NAV_LOITER_RAD 50
param set MPC_TKO_SPEED 1.0
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set COM_DISARM_LAND 5
param set MPC_ACC_HOR_MAX 2
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
land_detector start vtol
navigator start
attitude_estimator_q start
local_position_estimator start
vtol_att_control start
mc_pos_control start
mc_att_control start
fw_pos_control_l1 start
fw_att_control start
mixer load /dev/pwm_output0 etc/mixers-sitl/standard_vtol_sitl.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 20 -s EXTENDED_SYS_STATE -u 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart

83
posix-configs/SITL/init/lpe/typhoon_h480
Unescape View File

@ -1,83 +0,0 @@ @@ -1,83 +0,0 @@
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 13
param set SYS_AUTOSTART 6001
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.15
param set MPC_XY_VEL_I 0.2
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/hexa_x.main.mix
mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
vmount start
mavlink boot_complete
replay trystart

14
src/modules/wind_estimator/wind_estimator_main.cpp
Unescape View File

@ -327,13 +327,12 @@ int WindEstimatorModule::print_status() @@ -327,13 +327,12 @@ int WindEstimatorModule::print_status()
perf_print_counter(_perf_interval);
if (_instance > -1) {
unsigned instance = _instance;
uORB::Subscription<wind_estimate_s> est{ORB_ID(wind_estimate), instance};
uORB::Subscription<wind_estimate_s> est{ORB_ID(wind_estimate), (unsigned)_instance};
est.update();
print_message(est.get());
} else {
PX4_INFO("never published");
PX4_INFO("Running, but never published");
}
return 0;
@ -344,12 +343,5 @@ extern "C" __EXPORT int wind_estimator_main(int argc, char *argv[]); @@ -344,12 +343,5 @@ extern "C" __EXPORT int wind_estimator_main(int argc, char *argv[]);
int
wind_estimator_main(int argc, char *argv[])
{
int32_t wind_estimator_enabled = 0;
param_get(param_find("WEST_EN"), &wind_estimator_enabled);
if (wind_estimator_enabled == 1) {
return WindEstimatorModule::main(argc, argv);
}
return PX4_OK;
return WindEstimatorModule::main(argc, argv);
}

Write Preview
Loading…
Cancel
Save