px4_fmu-v6x:Add Rev 4 Sensors

boards/px4/fmu-v6x/init/rc.board_sensors

@@ -25,17 +25,23 @@ then
 	ina238 -X -b 2 -t 2 -k start
 fi
 
+if ver hwtypecmp V6X04 V6X14
+then
+	# Internal SPI bus ICM20649
+	icm20649 -s -R 6 start
+else
 # Internal SPI BMI088
-bmi088 -A -R 4 -s start
-bmi088 -G -R 4 -s start
+	bmi088 -A -R 4 -s start
+	bmi088 -G -R 4 -s start
+fi
 
 # Internal SPI bus ICM42688p
 icm42688p -R 6 -s start
 
-if ver hwtypecmp V6X03 V6X13
+if ver hwtypecmp V6X03 V6X13 V6X04 V6X14
 then
 	# Internal SPI bus ICM-42670-P (hard-mounted)
-	icm42670p -R 14 -s start
+	icm42670p -R 10 -s start
 else
 	# Internal SPI bus ICM-20649 (hard-mounted)
 	icm20649 -R 14 -s start

boards/px4/fmu-v6x/src/board_config.h

@@ -215,13 +215,15 @@
 #define HW_INFO_INIT_VER       3 /* Offset in above string of the VER */
 #define HW_INFO_INIT_REV       4 /* Offset in above string of the REV */
 
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3 Sensor sets
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 3 // Rev 0 and Rev 3,4 Sensor sets
 //                 Base/FMUM
 #define V6X00   HW_VER_REV(0x0,0x0) // FMUV6X,                 Rev 0
 #define V6X01   HW_VER_REV(0x0,0x1) // FMUV6X,     BMI388 I2C2 Rev 1
 #define V6X03   HW_VER_REV(0x0,0x3) // FMUV6X,     Sensor Set  Rev 3
+#define V6X04   HW_VER_REV(0x0,0x4) // FMUV6X,     Sensor Set  Rev 4
 #define V6X10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
 #define V6X13   HW_VER_REV(0x1,0x3) // NO PX4IO,   Sensor Set  Rev 3
+#define V6X14   HW_VER_REV(0x1,0x4) // NO PX4IO,   Sensor Set  Rev 4
 
 
 /* HEATER

boards/px4/fmu-v6x/src/manifest.c

@@ -102,6 +102,8 @@ static px4_hw_mft_list_entry_t mft_lists[] = {
 	{V6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2
 	{V6X03, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 3
 	{V6X13, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 3
+	{V6X04, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 4
+	{V6X14, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 4
 };
 
 /************************************************************************************

boards/px4/fmu-v6x/src/spi.cpp

@@ -83,6 +83,29 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
 		}),
 	}),
+
+	initSPIHWVersion(HW_VER_REV(0, 4), {
+		initSPIBus(SPI::Bus::SPI1, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42670P, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+		}, {GPIO::PortI, GPIO::Pin11}),
+		initSPIBus(SPI::Bus::SPI2, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		}, {GPIO::PortF, GPIO::Pin4}),
+		initSPIBus(SPI::Bus::SPI3, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM20649, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
+		}, {GPIO::PortE, GPIO::Pin7}),
+		//  initSPIBus(SPI::Bus::SPI4, {
+		//    // no devices
+		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
+		//  }, {GPIO::PortG, GPIO::Pin8}),
+		initSPIBus(SPI::Bus::SPI5, {
+			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
+		}),
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
+		}),
+	}),
 };
 
 static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);