Verified USB (device) on the PIC32 Ethernet Starter Kit

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4464 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/ChangeLog

@@ -2540,4 +2540,6 @@
 	  Starter Kit port.  Added and verified the NuttShell (NSH) on the PIC32
 	  Ethernet Starter Kit.  I can now (finally) claim to have complete the
 	  basic port to this board.
+	* configs/pic32-startkit/nsh/up_usbdev, up_nsh.c, and up_usbterm.c:  Verified
+	  the USB (device) driver on the PIC32 Ethernet Starter Kit.
 

nuttx/arch/mips/src/pic32mx/pic32mx-usbdev.c

@@ -3945,6 +3945,7 @@ static void pic32mx_hwreset(struct pic32mx_usbdev_s *priv)
 
   regval = pic32mx_getreg(PIC32MX_USB_PWRC);
   regval &= ~USB_PWRC_USBPWR;
+  pic32mx_putreg(regval, PIC32MX_USB_PWRC);
 
   /* Clear all of the buffer descriptor table (BDT) entries */
 

nuttx/configs/pic32-starterkit/README.txt

@@ -6,7 +6,7 @@ This README file discusses the port of NuttX to the Microchip PIC32 Ethernet
 Starter Kit (DM320004) with either
 
   1) The Multimedia Expansion Board (MEB, DM320005), or 
-  2) The Starter Kit I/O Exansion Board 
+  2) The Starter Kit I/O Expansion Board 
 
 See www.microchip.com for further information.
 
@@ -48,7 +48,7 @@ The MEB adds:
 - CPLD for SPI and Chip Select configuration
 - Integrated 802.11 wireless connectivity
 
-The Starter Kit I/O Exansion Board:
+The Starter Kit I/O Expansion Board:
 
 Mostly just brings out all of the pins from the tiny Starter Kit connector.
 
@@ -62,7 +62,7 @@ Contents
   Toolchains
   Creating Compatible NuttX HEX files
   Serial Console: MEB
-  Serial Console: Starter Kit I/O Exansion Board
+  Serial Console: Starter Kit I/O Expansion Board
   LEDs
   PIC32MX Configuration Options
   Configurations
@@ -605,11 +605,11 @@ Serial Console: MEB
        26  3.3V
        28  GND
 
-Serial Console: Starter Kit I/O Exansion Board
-==============================================
+Serial Console: Starter Kit I/O Expansion Board
+===============================================
 
   U1:
-  Ethernet Starter Kit                          Exansion I/O board
+  Ethernet Starter Kit                          Expansion I/O board
   --------------------------------------------- -------------------------
   PIN Description                         J2       J1  J10/J11
   --- ---------------------------------- ------------- ------------------
@@ -619,7 +619,7 @@ Serial Console: Starter Kit I/O Exansion Board
   53  RF8/SCL3/SDO3/U1TX                 J2 pin 90     J11 pin 43
  
   U2:
-  Ethernet Starter Kit                          Exansion I/O board
+  Ethernet Starter Kit                          Expansion I/O board
   --------------------------------------------- -------------------------
   PIN Description                         J2       J1  J10/J11
   --- ---------------------------------- ------------- ------------------
@@ -631,7 +631,7 @@ Serial Console: Starter Kit I/O Exansion Board
                                          J2 pin 110    J11 pin 46
 
   U3:
-  Ethernet Starter Kit                          Exansion I/O board
+  Ethernet Starter Kit                          Expansion I/O board
   --------------------------------------------- -------------------------
   PIN Description                         J2       J1  J10/J11
   --- ---------------------------------- ------------- ------------------
@@ -646,7 +646,7 @@ Serial Console: Starter Kit I/O Exansion Board
       U6RX
 
   U4:
-  Ethernet Starter Kit                          Exansion I/O board
+  Ethernet Starter Kit                          Expansion I/O board
   --------------------------------------------- -------------------------
   PIN Description                         J2       J1  J10/J11
   --- ---------------------------------- ------------- ------------------
@@ -654,7 +654,7 @@ Serial Console: Starter Kit I/O Exansion Board
   48  AETXD1/CN21/RD15/SCK3/U1RTS/U4TX   Not available N/A
 
   U5:
-  Ethernet Starter Kit                          Exansion I/O board
+  Ethernet Starter Kit                          Expansion I/O board
   --------------------------------------------- -------------------------
   PIN Description                         J2       J1  J10/J11
   --- ---------------------------------- ------------- ------------------
@@ -986,6 +986,8 @@ Where <subdir> is one of the following:
 
   nsh:
   ====
+    Description.
+    ------------
     This is the NuttShell (NSH) using the NSH startup logic at
     apps/examples/nsh.
 

nuttx/configs/pic32-starterkit/nsh/defconfig

@@ -140,7 +140,10 @@ CONFIG_PIC32MX_OC4=n
 CONFIG_PIC32MX_OC5=n
 CONFIG_PIC32MX_I2C1=n
 CONFIG_PIC32MX_I2C2=n
+CONFIG_PIC32MX_SPI1=n
 CONFIG_PIC32MX_SPI2=n
+CONFIG_PIC32MX_SPI3=n
+CONFIG_PIC32MX_SPI4=n
 CONFIG_PIC32MX_UART1=y
 CONFIG_PIC32MX_UART2=n
 CONFIG_PIC32MX_UART3=n
@@ -993,7 +996,7 @@ CONFIG_NSH_DISABLEBG=n
 CONFIG_NSH_ROMFSETC=n
 CONFIG_NSH_CONSOLE=y
 CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_IOBUFFER_SIZE=512
 CONFIG_NSH_DHCPC=n
 CONFIG_NSH_NOMAC=n

nuttx/configs/pic32-starterkit/ostest/defconfig

@@ -140,7 +140,10 @@ CONFIG_PIC32MX_OC4=n
 CONFIG_PIC32MX_OC5=n
 CONFIG_PIC32MX_I2C1=n
 CONFIG_PIC32MX_I2C2=n
+CONFIG_PIC32MX_SPI1=n
 CONFIG_PIC32MX_SPI2=n
+CONFIG_PIC32MX_SPI3=n
+CONFIG_PIC32MX_SPI4=n
 CONFIG_PIC32MX_UART1=y
 CONFIG_PIC32MX_UART2=n
 CONFIG_PIC32MX_UART3=n

nuttx/configs/pic32-starterkit/src/up_nsh.c

@@ -55,32 +55,58 @@
 /****************************************************************************
  * Pre-Processor Definitions
  ****************************************************************************/
-
 /* Configuration ************************************************************/
+/* Assume that we have MMC/SD, USB host (and USB device) */
+
+#define CONFIG_NSH_HAVEMMCSD   1
+#define CONFIG_NSH_HAVEUSBHOST 1
+
+/* The PIC32 Ethernet Starter Kit does not have an SD slot on board.  If one
+ * is added, then it must be specified by defining which SPI bus that it
+ * is connected on.
+ */
+
+#ifndef CONFIG_PIC32MX_MMCSDSPIPORTNO
+#  undef CONFIG_NSH_HAVEMMCSD
+#endif
+
+/* Make sure that the configuration will support the SD card */
 
-/* PORT and SLOT number probably depend on the board configuration */
+#ifdef CONFIG_NSH_HAVEMMCSD
 
-#ifdef CONFIG_ARCH_BOARD_SUREPIC32MX
-#  define CONFIG_NSH_HAVEMMCSD   1
-#  define CONFIG_NSH_HAVEUSBHOST 1
-#  if !defined(CONFIG_NSH_MMCSDSPIPORTNO) || CONFIG_NSH_MMCSDSPIPORTNO != 1
-#    error "The PIC32 Starter Kit MMC/SD is on SPI2"
+   /* Make sure that the NSH configuration uses the correct SPI */
+
+#  if !defined(CONFIG_NSH_MMCSDSPIPORTNO)
+#    define CONFIG_NSH_MMCSDSPIPORTNO CONFIG_PIC32MX_MMCSDSPIPORTNO
+#  elif CONFIG_NSH_MMCSDSPIPORTNO != CONFIG_PIC32MX_MMCSDSPIPORTNO
+#    warning "CONFIG_PIC32MX_MMCSDSPIPORTNO does not match CONFIG_NSH_MMCSDSPIPORTNO"
 #    undef CONFIG_NSH_MMCSDSPIPORTNO
-#    define CONFIG_NSH_MMCSDSPIPORTNO 2
+#    define CONFIG_NSH_MMCSDSPIPORTNO CONFIG_PIC32MX_MMCSDSPIPORTNO
 #  endif
+
+   /* Make sure that the NSH configuration uses the slot */
+
 #  if !defined(CONFIG_NSH_MMCSDSLOTNO) || CONFIG_NSH_MMCSDSLOTNO != 0
-#    error "The PIC32 Starter Kit has only one slot (0)"
+#    warning "The PIC32 Starter Kit has only one slot (0)"
 #    undef CONFIG_NSH_MMCSDSLOTNO
 #    define CONFIG_NSH_MMCSDSLOTNO 0
 #  endif
-#  ifndef CONFIG_PIC32MX_SPI2
+
+   /* Make sure that the correct SPI is enabled in the configuration */
+
+#  if CONFIG_PIC32MX_MMCSDSPIPORTNO == 1 && !defined(CONFIG_PIC32MX_SPI1)
+#    warning "CONFIG_PIC32MX_SPI1 is not enabled"
+#    undef CONFIG_NSH_HAVEMMCSD
+#  elif CONFIG_PIC32MX_MMCSDSPIPORTNO == 2 && !defined(CONFIG_PIC32MX_SPI2)
 #    warning "CONFIG_PIC32MX_SPI2 is not enabled"
 #    undef CONFIG_NSH_HAVEMMCSD
+#  elif CONFIG_PIC32MX_MMCSDSPIPORTNO == 3 && !defined(CONFIG_PIC32MX_SPI3)
+#    warning "CONFIG_PIC32MX_SPI3 is not enabled"
+#    undef CONFIG_NSH_HAVEMMCSD
+#  elif CONFIG_PIC32MX_MMCSDSPIPORTNO == 4 && !defined(CONFIG_PIC32MX_SPI4)
+#    warning "CONFIG_PIC32MX_SPI4 is not enabled"
+#    undef CONFIG_NSH_HAVEMMCSD
 #  endif
-#else
-#  error "Unrecognized board"
-#  undef CONFIG_NSH_HAVEMMCSD
-#  undef CONFIG_NSH_HAVEUSBHOST
 #endif
 
 /* Can't support MMC/SD features if mountpoints are disabled */
@@ -89,6 +115,8 @@
 #  undef CONFIG_NSH_HAVEMMCSD
 #endif
 
+/* Select /dev/mmcsd0 if no other minor number is provided */
+
 #ifndef CONFIG_NSH_MMCSDMINOR
 #  define CONFIG_NSH_MMCSDMINOR 0
 #endif
@@ -98,12 +126,14 @@
 #ifdef CONFIG_USBHOST
 #  ifndef CONFIG_PIC32MX_USBHOST
 #    error "CONFIG_PIC32MX_USBHOST is not selected"
+#    undef CONFIG_NSH_HAVEUSBHOST
 #  endif
 #endif
 
 #ifdef CONFIG_PIC32MX_USBHOST
 #  ifndef CONFIG_USBHOST
 #    warning "CONFIG_USBHOST is not selected"
+#    undef CONFIG_NSH_HAVEUSBHOST
 #  endif
 #endif