Put Shenzhou NxWM config on a diet

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5203 42af7a65-404d-4744-a932-0658087f49c3

nuttx/ChangeLog

@@ -3446,3 +3446,7 @@
 	  The work around for now:  Just disable reading from the LCD.
 	* drivers/lcd/ssd1289.c:  Add some logic to reduce the amount of
 	  output when CONFIG_DEBUG_LCD is enabled.
+	* configs/shenzhou/nxwm/defconfig:  Bug found and fixed... The
+	  original configuration had too much stuff turned on.  Reducing
+	  stack sizes, some features, and buffer sizes made the
+	  configuration reliable (Reading from the LCD is still disabled).

nuttx/configs/shenzhou/README.txt

@@ -760,9 +760,9 @@ Where <subdir> is one of the following:
     and drivers/lcd/ssd1289.c also supports reading from the LCD.
     This limits some graphics capabilities.
 
-    If you enable reading from the LCD, you will see some memory
-    corruption.  If you get inspired to debug this problem, you can
-    turn the LCD read functionality back on by setting:
+    Reading from the LCD is not supported only because it has not
+    been test.  If you get inspired to test this feature, you can
+    turn the LCD read functionality on by setting:
 
       -CONFIG_LCD_NOGETRUN=y
       +# CONFIG_LCD_NOGETRUN is not set

nuttx/configs/shenzhou/nxwm/defconfig

@@ -121,15 +121,15 @@ CONFIG_STM32_CODESOURCERYW=y
 # CONFIG_STM32_CRC is not set
 # CONFIG_STM32_DMA1 is not set
 # CONFIG_STM32_DMA2 is not set
-CONFIG_STM32_BKP=y
+# CONFIG_STM32_BKP is not set
 # CONFIG_STM32_CAN1 is not set
 # CONFIG_STM32_DAC1 is not set
 # CONFIG_STM32_DAC2 is not set
 CONFIG_STM32_ETHMAC=y
-CONFIG_STM32_I2C1=y
+# CONFIG_STM32_I2C1 is not set
 # CONFIG_STM32_I2C2 is not set
 # CONFIG_STM32_IWDG is not set
-CONFIG_STM32_PWR=y
+# CONFIG_STM32_PWR is not set
 # CONFIG_STM32_SPI1 is not set
 # CONFIG_STM32_SPI2 is not set
 CONFIG_STM32_SPI3=y
@@ -149,14 +149,12 @@ CONFIG_STM32_USART2=y
 # CONFIG_STM32_USB is not set
 # CONFIG_STM32_WWDG is not set
 CONFIG_STM32_SPI=y
-CONFIG_STM32_I2C=y
 
 #
 # Alternate Pin Mapping
 #
 CONFIG_STM32_USART2_REMAP=y
 CONFIG_STM32_SPI3_REMAP=y
-# CONFIG_STM32_I2C1_REMAP is not set
 CONFIG_STM32_ETH_REMAP=y
 # CONFIG_STM32_JTAG_DISABLE is not set
 CONFIG_STM32_JTAG_FULL_ENABLE=y
@@ -171,15 +169,6 @@ CONFIG_STM32_JTAG_FULL_ENABLE=y
 # CONFIG_STM32_SPI_INTERRUPTS is not set
 # CONFIG_STM32_SPI_DMA is not set
 
-#
-# I2C Configuration
-#
-# CONFIG_STM32_I2C_DYNTIMEO is not set
-CONFIG_STM32_I2CTIMEOSEC=0
-CONFIG_STM32_I2CTIMEOMS=500
-CONFIG_STM32_I2CTIMEOTICKS=500
-# CONFIG_STM32_I2C_DUTY16_9 is not set
-
 #
 # Ethernet MAC configuration
 #
@@ -285,10 +274,10 @@ CONFIG_SDCLONE_DISABLE=y
 CONFIG_SCHED_WORKQUEUE=y
 CONFIG_SCHED_WORKPRIORITY=192
 CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=2048
+CONFIG_SCHED_WORKSTACKSIZE=1024
 CONFIG_SIG_SIGWORK=4
 # CONFIG_SCHED_LPWORK is not set
-CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_WAITPID is not set
 # CONFIG_SCHED_ATEXIT is not set
 CONFIG_SCHED_ONEXIT=y
 CONFIG_SCHED_ONEXIT_MAX=1
@@ -323,9 +312,9 @@ CONFIG_PREALLOC_TIMERS=4
 #
 # CONFIG_CUSTOM_STACK is not set
 CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=1024
 CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_PTHREAD_STACK_DEFAULT=1024
 
 #
 # Device Drivers
@@ -336,22 +325,13 @@ CONFIG_DEV_NULL=y
 # CONFIG_RAMDISK is not set
 # CONFIG_CAN is not set
 # CONFIG_PWM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_SLAVE is not set
-CONFIG_I2C_TRANSFER=y
-# CONFIG_I2C_WRITEREAD is not set
-CONFIG_I2C_POLLED=y
-# CONFIG_I2C_TRACE is not set
+# CONFIG_I2C is not set
 CONFIG_ARCH_HAVE_I2CRESET=y
-# CONFIG_I2C_RESET is not set
 CONFIG_SPI=y
 # CONFIG_SPI_OWNBUS is not set
 CONFIG_SPI_EXCHANGE=y
 # CONFIG_SPI_CMDDATA is not set
-CONFIG_RTC=y
-# CONFIG_RTC_DATETIME is not set
-# CONFIG_RTC_HIRES is not set
-# CONFIG_RTC_ALARM is not set
+# CONFIG_RTC is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_ANALOG is not set
 # CONFIG_BCH is not set
@@ -432,16 +412,16 @@ CONFIG_PHY_DM9161=y
 # CONFIG_NET_NOINTS is not set
 CONFIG_NET_MULTIBUFFER=y
 # CONFIG_NET_IPv6 is not set
-CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NSOCKET_DESCRIPTORS=16
 CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOCKOPTS=y
 CONFIG_NET_BUFSIZE=562
 # CONFIG_NET_TCPURGDATA is not set
 CONFIG_NET_TCP=y
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_TCP_CONNS=16
+CONFIG_NET_MAX_LISTENPORTS=16
 CONFIG_NET_TCP_READAHEAD_BUFSIZE=562
-CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=4
 CONFIG_NET_TCP_RECVDELAY=0
 CONFIG_NET_TCPBACKLOG=y
 CONFIG_NET_UDP=y
@@ -464,12 +444,7 @@ CONFIG_NET_ARPTAB_SIZE=16
 #
 # File system configuration
 #
-CONFIG_FS_FAT=y
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_MAXFNAME=32
-# CONFIG_FS_FATTIME is not set
-# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_FS_FAT is not set
 # CONFIG_FS_RAMMAP is not set
 # CONFIG_NFS is not set
 # CONFIG_FS_NXFFS is not set
@@ -962,7 +937,7 @@ CONFIG_NETUTILS_WEBCLIENT=y
 # NSH Library
 #
 CONFIG_NSH_LIBRARY=y
-CONFIG_NSH_BUILTIN_APPS=y
+# CONFIG_NSH_BUILTIN_APPS is not set
 
 #
 # Disable Individual commands
@@ -1016,9 +991,9 @@ CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_TELNET=y
 CONFIG_NSH_TELNETD_PORT=23
 CONFIG_NSH_TELNETD_DAEMONPRIO=100
-CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=1596
 CONFIG_NSH_TELNETD_CLIENTPRIO=100
-CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=1596
 CONFIG_NSH_IOBUFFER_SIZE=512
 CONFIG_NSH_IPADDR=0x0a000002
 CONFIG_NSH_DRIPADDR=0x0a000001
@@ -1036,10 +1011,10 @@ CONFIG_NXWIDGETS=y
 CONFIG_NXWIDGETS_DEVNO=0
 CONFIG_NXWIDGETS_VPLANE=0
 CONFIG_NXWIDGETS_SERVERPRIO=51
-CONFIG_NXWIDGETS_SERVERSTACK=2048
+CONFIG_NXWIDGETS_SERVERSTACK=1596
 CONFIG_NXWIDGETS_CLIENTPRIO=50
 CONFIG_NXWIDGETS_LISTENERPRIO=50
-CONFIG_NXWIDGETS_LISTENERSTACK=2048
+CONFIG_NXWIDGETS_LISTENERSTACK=1596
 # CONFIG_NXWIDGETS_EXTERNINIT is not set
 # CONFIG_NXWIDGET_EVENTWAIT is not set
 
@@ -1128,13 +1103,13 @@ CONFIG_NXWM_STARTWINDOW_MQNAME="/dev/nxwm"
 CONFIG_NXWM_STARTWINDOW_MXMSGS=32
 CONFIG_NXWM_STARTWINDOW_MXMPRIO=42
 CONFIG_NXWM_STARTWINDOW_PRIO=50
-CONFIG_NXWM_STARTWINDOW_STACKSIZE=2048
+CONFIG_NXWM_STARTWINDOW_STACKSIZE=1596
 
 #
 # NxConsole Window Configuration
 #
 CONFIG_NXWM_NXCONSOLE_PRIO=50
-CONFIG_NXWM_NXCONSOLE_STACKSIZE=2048
+CONFIG_NXWM_NXCONSOLE_STACKSIZE=1596
 CONFIG_NXWM_NXCONSOLE_WCOLOR=
 CONFIG_NXWM_NXCONSOLE_FONTCOLOR=
 CONFIG_NXWM_NXCONSOLE_FONTID=
@@ -1148,7 +1123,7 @@ CONFIG_NXWM_TOUCHSCREEN_DEVNO=0
 CONFIG_NXWM_TOUCHSCREEN_DEVPATH="/dev/input0"
 CONFIG_NXWM_TOUCHSCREEN_SIGNO=5
 CONFIG_NXWM_TOUCHSCREEN_LISTENERPRIO=50
-CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=
+CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=1596
 CONFIG_NXWM_KEYBOARD=y
 
 #
@@ -1158,7 +1133,7 @@ CONFIG_NXWM_KEYBOARD_DEVPATH="/dev/console"
 CONFIG_NXWM_KEYBOARD_SIGNO=6
 CONFIG_NXWM_KEYBOARD_BUFSIZE=16
 CONFIG_NXWM_KEYBOARD_LISTENERPRIO=50
-CONFIG_NXWM_KEYBOARD_LISTENERSTACK=2048
+CONFIG_NXWM_KEYBOARD_LISTENERSTACK=1024
 
 #
 # Calibration display settings
@@ -1170,7 +1145,7 @@ CONFIG_NXWM_CALIBRATION_TOUCHEDCOLOR=
 CONFIG_NXWM_CALIBRATION_ICON=""
 CONFIG_NXWM_CALIBRATION_SIGNO=5
 CONFIG_NXWM_CALIBRATION_LISTENERPRIO=50
-CONFIG_NXWM_CALIBRATION_LISTENERSTACK=2048
+CONFIG_NXWM_CALIBRATION_LISTENERSTACK=1024
 
 #
 # Calibration display settings
@@ -1191,14 +1166,6 @@ CONFIG_NXWM_HEXCALCULATOR_FONTID=5
 #
 # I2C tool
 #
-CONFIG_SYSTEM_I2CTOOL=y
-CONFIG_I2CTOOL_BUILTIN=y
-CONFIG_I2CTOOL_MINBUS=1
-CONFIG_I2CTOOL_MAXBUS=3
-CONFIG_I2CTOOL_MINADDR=0x03
-CONFIG_I2CTOOL_MAXADDR=0x77
-CONFIG_I2CTOOL_MAXREGADDR=0xff
-CONFIG_I2CTOOL_DEFFREQ=100000
 
 #
 # FLASH Program Installation