Enable the I2C tool in the STM3240G-EVAL NSH configuration

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@4328 7fd9a85b-ad96-42d3-883c-3090e2eb8679

nuttx/configs/stm3240g-eval/dhcpd/defconfig

@@ -326,6 +326,14 @@ CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
 CONFIG_STM32_ETH_PTP=n
 CONFIG_STM32_ETHMAC_REGDEBUG=n
 
+#
+# I2C configuration
+#
+CONFIG_I2C=n
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
 #
 # General build options
 #
@@ -1174,6 +1182,25 @@ CONFIG_NSH_MMCSDSPIPORTNO=0
 CONFIG_NSH_MMCSDSLOTNO=0
 CONFIG_NSH_MMCSDMINOR=0
 
+#
+# I2C tool settings
+#
+# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
+# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
+# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
+# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
+# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
+# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
+# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000)
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
 #
 # Settings for examples/usbserial
 #

nuttx/configs/stm3240g-eval/nettest/defconfig

@@ -326,6 +326,14 @@ CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
 CONFIG_STM32_ETH_PTP=n
 CONFIG_STM32_ETHMAC_REGDEBUG=n
 
+#
+# I2C configuration
+#
+CONFIG_I2C=n
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
 #
 # General build options
 #
@@ -1167,6 +1175,25 @@ CONFIG_NSH_MMCSDSPIPORTNO=0
 CONFIG_NSH_MMCSDSLOTNO=0
 CONFIG_NSH_MMCSDMINOR=0
 
+#
+# I2C tool settings
+#
+# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
+# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
+# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
+# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
+# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
+# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
+# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000)
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
 #
 # Settings for examples/usbserial
 #

nuttx/configs/stm3240g-eval/nsh/appconfig

@@ -62,3 +62,6 @@ ifeq ($(CONFIG_CAN),y)
 CONFIGURED_APPS += examples/can
 endif
 
+ifeq ($(CONFIG_I2C),y)
+CONFIGURED_APPS += system/i2c
+endif

nuttx/configs/stm3240g-eval/nsh/defconfig

@@ -155,7 +155,7 @@ CONFIG_STM32_USART2=n
 CONFIG_STM32_USART3=y
 CONFIG_STM32_UART4=n
 CONFIG_STM32_UART5=n
-CONFIG_STM32_I2C1=n
+CONFIG_STM32_I2C1=y
 CONFIG_STM32_I2C2=n
 CONFIG_STM32_I2C3=n
 CONFIG_STM32_CAN1=n
@@ -328,6 +328,14 @@ CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
 CONFIG_STM32_ETH_PTP=n
 CONFIG_STM32_ETHMAC_REGDEBUG=n
 
+#
+# I2C configuration
+#
+CONFIG_I2C=y
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
 #
 # ADC configuration
 #
@@ -489,6 +497,7 @@ CONFIG_DEBUG_RTC=n
 CONFIG_DEBUG_ANALOG=n
 CONFIG_DEBUG_PWM=n
 CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
 CONFIG_HAVE_CXX=y
 CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
@@ -1210,6 +1219,25 @@ CONFIG_NSH_MMCSDSPIPORTNO=0
 CONFIG_NSH_MMCSDSLOTNO=0
 CONFIG_NSH_MMCSDMINOR=0
 
+#
+# I2C tool settings
+#
+# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
+# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
+# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
+# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
+# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
+# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
+# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000)
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
 #
 # Settings for examples/usbserial
 #

nuttx/configs/stm3240g-eval/ostest/defconfig

@@ -324,6 +324,14 @@ CONFIG_STM32_PHYSR_MODE=0x0004
 CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
 CONFIG_STM32_ETH_PTP=n
 
+#
+# I2C configuration
+#
+CONFIG_I2C=n
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
 #
 # General build options
 #
@@ -1368,6 +1376,25 @@ CONFIG_EXAMPLE_BUTTONS_NAME0="Key/Select"
 CONFIG_EXAMPLE_BUTTONS_NAME1="Left/Right"
 CONFIG_EXAMPLE_BUTTONS_NAME2="Up/Down"
 
+#
+# I2C tool settings
+#
+# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
+# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
+# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
+# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
+# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
+# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
+# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000)
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
 #
 # Settings for examples/usbserial
 #