Added config for the FX-79

ROMFS/px4fmu_common/init.d/34_io_fx79

@@ -0,0 +1,87 @@
+#!nsh
+
+echo "[init] PX4FMU v1, v2 with or without IO on FX-79 Buffalo"
+
+#
+# Load default params for this platform
+#
+if param compare SYS_AUTOCONFIG 1
+then
+	# Set all params here, then disable autoconfig
+	param set FW_P_D 0
+	param set FW_P_I 0
+	param set FW_P_IMAX 15
+	param set FW_P_LIM_MAX 50
+	param set FW_P_LIM_MIN -50
+	param set FW_P_P 60
+	param set FW_P_RMAX_NEG 0
+	param set FW_P_RMAX_POS 0
+	param set FW_P_ROLLFF 1.1
+	param set FW_R_D 0
+	param set FW_R_I 5
+	param set FW_R_IMAX 20
+	param set FW_R_P 100
+	param set FW_R_RMAX 100
+	param set FW_THR_CRUISE 0.65
+	param set FW_THR_MAX 1
+	param set FW_THR_MIN 0
+	param set FW_T_SINK_MAX 5.0
+	param set FW_T_SINK_MIN 4.0
+	param set FW_Y_ROLLFF 1.1
+	param set FW_L1_PERIOD 17
+	param set RC_SCALE_ROLL 1.0
+	param set RC_SCALE_PITCH 1.0
+	
+	param set SYS_AUTOCONFIG 0
+	param save
+fi
+ 
+#
+# Force some key parameters to sane values
+# MAV_TYPE     1 = fixed wing
+#
+param set MAV_TYPE 1
+
+set EXIT_ON_END no
+
+#
+# Start and configure PX4IO or FMU interface
+#
+if px4io detect
+then
+	# Start MAVLink (depends on orb)
+	mavlink start
+
+	sh /etc/init.d/rc.io
+	# Limit to 100 Hz updates and (implicit) 50 Hz PWM
+	px4io limit 100
+else
+	# Start MAVLink (on UART1 / ttyS0)
+	mavlink start -d /dev/ttyS0
+
+	fmu mode_pwm
+	param set BAT_V_SCALING 0.004593
+	set EXIT_ON_END yes
+fi
+
+#
+# Load mixer and start controllers (depends on px4io)
+#
+if [ -f /fs/microsd/etc/mixers/FMU_FX79.mix ]
+then
+	echo "Using /fs/microsd/etc/mixers/FMU_FX79.mix"
+	mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_FX79.mix
+else
+	echo "Using /etc/mixers/FMU_FX79.mix"
+	mixer load /dev/pwm_output /etc/mixers/FMU_FX79.mix
+fi
+
+#
+# Start common fixedwing apps
+#
+sh /etc/init.d/rc.fixedwing
+
+if [ $EXIT_ON_END == yes ]
+then
+	exit
+fi

ROMFS/px4fmu_common/init.d/rcS

@@ -327,6 +327,12 @@ then
 		set MODE custom
 	fi
 
+        if param compare SYS_AUTOSTART 34
+        then
+                sh /etc/init.d/34_io_fx79
+                set MODE custom
+        fi
+
 	if param compare SYS_AUTOSTART 40
 	then
 		sh /etc/init.d/40_io_segway

ROMFS/px4fmu_common/mixers/FMU_FX79.mix

@@ -0,0 +1,72 @@
+FX-79 Delta-wing mixer for PX4FMU
+=================================
+
+Designed for FX-79.
+
+TODO (sjwilks): Add mixers for flaps.
+
+This file defines mixers suitable for controlling a delta wing aircraft using
+PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
+servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
+assumed to be unused.
+
+Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
+(roll), 1 (pitch) and 3 (thrust).
+
+See the README for more information on the scaler format.
+
+Elevon mixers
+-------------
+Three scalers total (output, roll, pitch).
+
+On the assumption that the two elevon servos are physically reversed, the pitch
+input is inverted between the two servos.
+
+The scaling factor for roll inputs is adjusted to implement differential travel
+for the elevons.
+
+M: 2
+O:      10000  10000      0 -10000  10000
+S: 0 0   5000   8000      0 -10000  10000
+S: 0 1   8000   8000      0 -10000  10000
+
+M: 2
+O:      10000  10000      0 -10000  10000
+S: 0 0   8000   5000      0 -10000  10000
+S: 0 1  -8000  -8000      0 -10000  10000
+
+Output 2
+--------
+This mixer is empty.
+
+Z:
+
+Motor speed mixer
+-----------------
+Two scalers total (output, thrust).
+
+This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
+range.  Inputs below zero are treated as zero.
+
+M: 1
+O:      10000  10000      0 -10000  10000
+S: 0 3      0  20000 -10000 -10000  10000
+
+Gimbal / flaps / payload mixer for last four channels
+-----------------------------------------------------
+
+M: 1
+O:      10000  10000      0 -10000  10000
+S: 0 4  10000  10000      0 -10000  10000
+
+M: 1
+O:      10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
+
+M: 1
+O:      10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
+
+M: 1
+O:      10000  10000      0 -10000  10000
+S: 0 7  10000  10000      0 -10000  10000