Jenkins: hardware test rack remove Holybro Durandal

- IMUs on this particular unit no longer function

.ci/Jenkinsfile-hardware

@@ -746,80 +746,6 @@ pipeline {
           }
         }
 
-        stage("holybro_durandal-v1_test") {
-          stages {
-            stage("build holybro_durandal-v1_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
-                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkout scm
-                sh 'export'
-                sh 'make distclean'
-                sh 'ccache -s'
-                sh 'git fetch --tags'
-                sh 'make holybro_durandal-v1_test'
-                sh 'make sizes'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_test'
-              }
-              post {
-                always {
-                    sh 'make distclean'
-                }
-              }
-            } // stage build
-            stage("test") {
-              agent {
-                label 'holybro_durandal-v1'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'holybro_durandal-v1_test'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_test/holybro_durandal-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                  }
-                }
-                stage("configure") {
-                  steps {
-                    // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
-                  }
-                }
-                stage("status") {
-                  steps {
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dshot status"'
-                    statusFTDI()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    // run tests
-                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
-                  }
-                }
-                stage("reset") {
-                  steps {
-                    cleanupFTDI()
-                  }
-                }
-              }
-            } // stage test
-          }
-        }
-
         stage("nxp_fmuk66-v3_test") {
           stages {
             stage("build nxp_fmuk66-v3_test") {