Browse Source

clarify left/right and elevon assignments

sbg
Mark Whitehorn 9 years ago committed by tumbili
parent
commit
5ee6dad7ea
  1. 18
      ROMFS/px4fmu_common/mixers/caipirinha_vtol.main.mix

18
ROMFS/px4fmu_common/mixers/caipirinha_vtol.main.mix

@ -3,17 +3,21 @@ Caipirinha tailsitter mixer @@ -3,17 +3,21 @@ Caipirinha tailsitter mixer
This file defines a mixer for the TBS Caipirinha tailsitter edition. This vehicle
has two motors in total, one attached to each wing. It also has two elevons which
are located in the slipstream of the propellers.
are located in the slipstream of the propellers. This mixer generates 4 PWM outputs
on the main PWM ouput port, two at 400Hz for the motors, and two at 50Hz for the
elevon servos. Channels 1-4 are configured to run at 400Hz, while channels 5-8 run
at the default rate of 50Hz. Note that channels 3 and 4 are assigned but not used.
Motor mixer
------------
When standing in front of the vehicle the first motor should be on the left side
while the second motor should be on the right side.
Channel 1 connects to the right (starboard) motor.
Channel 2 connects to the left (port) motor.
R: 2- 10000 10000 10000 0
Zero mixer (2x)
---------------
Channels 3,4 are unused.
Z:
@ -21,11 +25,13 @@ Z: @@ -21,11 +25,13 @@ Z:
Elevons mixer
--------------
Channel 5 connects to the right (starboard) elevon.
Channel 6 connects to the left (port) elevon.
M: 2
O: 10000 10000 0 -10000 10000
S: 1 0 -10000 -10000 0 -10000 10000
S: 1 1 10000 10000 0 -10000 10000
O: 10000 10000 0 -10000 10000
S: 1 0 -10000 -10000 0 -10000 10000
S: 1 1 10000 10000 0 -10000 10000
M: 2
O: 10000 10000 0 -10000 10000

Loading…
Cancel
Save