ubx: add sbas config, default to disable

src/drivers/gps/ubx.cpp

@@ -189,6 +189,16 @@ UBX::configure(unsigned &baudrate)
 		return 1;
 	}
 
+	/* send a SBAS message to set the SBAS options */
+	memset(&_buf.payload_tx_cfg_sbas, 0, sizeof(_buf.payload_tx_cfg_sbas));
+	_buf.payload_tx_cfg_sbas.mode		= UBX_TX_CFG_SBAS_MODE;
+
+	send_message(UBX_MSG_CFG_SBAS, _buf.raw, sizeof(_buf.payload_tx_cfg_sbas));
+
+	if (wait_for_ack(UBX_MSG_CFG_SBAS, UBX_CONFIG_TIMEOUT, true) < 0) {
+		return 1;
+	}
+
 	/* configure message rates */
 	/* the last argument is divisor for measurement rate (set by CFG RATE), i.e. 1 means 5Hz */
 
@@ -265,6 +275,8 @@ UBX::wait_for_ack(const uint16_t msg, const unsigned timeout, const bool report)
 		}
 	}
 
+	warnx("msg %u ret %d", msg, ret);
+
 	_ack_state = UBX_ACK_IDLE;
 	return ret;
 }

src/drivers/gps/ubx.h

@@ -73,6 +73,7 @@
 #define UBX_ID_CFG_MSG		0x01
 #define UBX_ID_CFG_RATE		0x08
 #define UBX_ID_CFG_NAV5		0x24
+#define UBX_ID_CFG_SBAS		0x16
 #define UBX_ID_MON_VER		0x04
 #define UBX_ID_MON_HW		0x09
 
@@ -89,6 +90,7 @@
 #define UBX_MSG_CFG_MSG		((UBX_CLASS_CFG) | UBX_ID_CFG_MSG << 8)
 #define UBX_MSG_CFG_RATE	((UBX_CLASS_CFG) | UBX_ID_CFG_RATE << 8)
 #define UBX_MSG_CFG_NAV5	((UBX_CLASS_CFG) | UBX_ID_CFG_NAV5 << 8)
+#define UBX_MSG_CFG_SBAS	((UBX_CLASS_CFG) | UBX_ID_CFG_SBAS << 8)
 #define UBX_MSG_MON_HW		((UBX_CLASS_MON) | UBX_ID_MON_HW << 8)
 #define UBX_MSG_MON_VER		((UBX_CLASS_MON) | UBX_ID_MON_VER << 8)
 
@@ -128,6 +130,11 @@
 #define UBX_TX_CFG_NAV5_DYNMODEL	7		/**< 0 Portable, 2 Stationary, 3 Pedestrian, 4 Automotive, 5 Sea, 6 Airborne <1g, 7 Airborne <2g, 8 Airborne <4g */
 #define UBX_TX_CFG_NAV5_FIXMODE		2		/**< 1 2D only, 2 3D only, 3 Auto 2D/3D */
 
+/* TX CFG-SBAS message contents */
+#define UBX_TX_CFG_SBAS_MODE_ENABLED	1				/**< SBAS enabled */
+#define UBX_TX_CFG_SBAS_MODE_DISABLED	0				/**< SBAS disabled */
+#define UBX_TX_CFG_SBAS_MODE		UBX_TX_CFG_SBAS_MODE_DISABLED	/**< SBAS enabled or disabled */
+
 /* TX CFG-MSG message contents */
 #define UBX_TX_CFG_MSG_RATE1_5HZ	0x01 		/**< {0x00, 0x01, 0x00, 0x00, 0x00, 0x00} the second entry is for UART1 */
 #define UBX_TX_CFG_MSG_RATE1_1HZ	0x05		/**< {0x00, 0x05, 0x00, 0x00, 0x00, 0x00} the second entry is for UART1 */
@@ -383,6 +390,15 @@ typedef struct {
 	uint32_t	reserved4;
 } ubx_payload_tx_cfg_nav5_t;
 
+/* tx cfg-sbas */
+typedef struct {
+	uint8_t		mode;
+	uint8_t		usage;
+	uint8_t		maxSBAS;
+	uint8_t		scanmode2;
+	uint32_t	scanmode1;
+} ubx_payload_tx_cfg_sbas_t;
+
 /* Tx CFG-MSG */
 typedef struct {
 	union {
@@ -413,6 +429,7 @@ typedef union {
 	ubx_payload_tx_cfg_prt_t		payload_tx_cfg_prt;
 	ubx_payload_tx_cfg_rate_t		payload_tx_cfg_rate;
 	ubx_payload_tx_cfg_nav5_t		payload_tx_cfg_nav5;
+	ubx_payload_tx_cfg_sbas_t		payload_tx_cfg_sbas;
 	ubx_payload_tx_cfg_msg_t		payload_tx_cfg_msg;
 	uint8_t					raw[];
 } ubx_buf_t;