Jenkins add VTOL tiltrotor mission test

Jenkinsfile

@@ -240,7 +240,7 @@ pipeline {
           }
         }
 
-        stage('ROS vtol standard mission new 1') {
+        stage('ROS vtol standard mission') {
           agent {
             docker {
               image 'px4io/px4-dev-ros:2018-03-30'
@@ -302,6 +302,37 @@ pipeline {
           }
         }
 
+        stage('ROS vtol tiltrotor mission') {
+          agent {
+            docker {
+              image 'px4io/px4-dev-ros:2018-03-30'
+              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
+            }
+          }
+          steps {
+            sh 'export'
+            sh 'make distclean; rm -rf .ros; rm -rf .gazebo'
+            sh 'git fetch --tags'
+            sh 'make posix_sitl_default'
+            sh 'make posix_sitl_default sitl_gazebo'
+            sh './test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=vtol_new_1 vehicle:=tiltrotor'
+            sh './Tools/ecl_ekf/process_logdata_ekf.py `find . -name *.ulg -print -quit`'
+          }
+          post {
+            always {
+              sh './Tools/upload_log.py -q --description "${JOB_NAME}: ${STAGE_NAME}" --feedback "${JOB_NAME} ${CHANGE_TITLE} ${CHANGE_URL}" --source CI .ros/rootfs/fs/microsd/log/*/*.ulg'
+              archiveArtifacts '.ros/**/*.pdf'
+              archiveArtifacts '.ros/**/*.csv'
+              sh 'make distclean'
+            }
+            failure {
+              archiveArtifacts '.ros/**/*.ulg'
+              archiveArtifacts '.ros/**/rosunit-*.xml'
+              archiveArtifacts '.ros/**/rostest-*.log'
+            }
+          }
+        }
+
         stage('ROS vtol mission new 2') {
           agent {
             docker {

posix-configs/SITL/init/ekf2/tiltrotor

@@ -1,7 +1,9 @@
 uorb start
 param load
 dataman start
+
 param set BAT_N_CELLS 3
+
 param set CAL_ACC0_ID 1376264
 param set CAL_ACC0_XOFF 0.01
 param set CAL_ACC0_XSCALE 1.01
@@ -15,24 +17,31 @@ param set CAL_GYRO0_ID 2293768
 param set CAL_GYRO0_XOFF 0.01
 param set CAL_MAG0_ID 196616
 param set CAL_MAG0_XOFF 0.01
+
 param set COM_DISARM_LAND 5
 param set COM_RC_IN_MODE 1
+
 param set EKF2_AID_MASK 1
 param set EKF2_ANGERR_INIT 0.01
 param set EKF2_GBIAS_INIT 0.01
 param set EKF2_HGT_MODE 0
 param set EKF2_MAG_TYPE 1
+
 param set FW_AIRSPD_MAX 25
 param set FW_AIRSPD_MIN 14
 param set FW_AIRSPD_TRIM 16
+
 param set MAV_TYPE 21
+
 param set MC_PITCH_P 6
 param set MC_PITCHRATE_P 0.2
 param set MC_ROLL_P 6
 param set MC_ROLLRATE_P 0.3
+
 param set MIS_LTRMIN_ALT 10
 param set MIS_TAKEOFF_ALT 10
 param set MIS_YAW_TMT 10
+
 param set MPC_ACC_HOR_MAX 2
 param set MPC_ACC_HOR_MAX 2.0
 param set MPC_TKO_SPEED 1.0
@@ -43,24 +52,31 @@ param set MPC_XY_VEL_P 0.15
 param set MPC_Z_VEL_I 0.15
 param set MPC_Z_VEL_MAX_DN 1.5
 param set MPC_Z_VEL_P 0.6
+
 param set NAV_ACC_RAD 5.0
 param set NAV_DLL_ACT 2
 param set NAV_LOITER_RAD 80
+
 param set RTL_DESCEND_ALT 10.0
 param set RTL_LAND_DELAY 0
 param set RTL_RETURN_ALT 30.0
+
 param set SDLOG_DIRS_MAX 7
+
 param set SENS_BOARD_ROT 0
 param set SENS_BOARD_X_OFF 0.000001
 param set SENS_DPRES_OFF 0.001
-param set SYS_AUTOSTART 13006
+
+param set SYS_AUTOSTART 13012
 param set SYS_MC_EST_GROUP 2
 param set SYS_RESTART_TYPE 2
+
 param set VT_MOT_COUNT 4
 param set VT_F_TRANS_THR 0.75
 param set VT_TYPE 1
 param set VT_TILT_FW 3.1415
 param set VT_TILT_TRANS 1.2
+
 replay tryapplyparams
 simulator start -s
 tone_alarm start