px4io: added RC_CONFIG, SET_OVERRIDE_OK and CLEAR_OVERRIDE_OK ioctls

this allows for full setup of RC override without needing param_get()
to PX4 specific parameters

src/drivers/drv_pwm_output.h

@@ -117,6 +117,23 @@ struct pwm_output_values {
 	unsigned			channel_count;
 };
 
+
+/**
+ * RC config values for a channel
+ *
+ * This allows for PX4IO_PAGE_RC_CONFIG values to be set without a
+ * param_get() dependency
+ */
+struct pwm_output_rc_config {
+	uint8_t channel;
+	uint16_t rc_min;
+	uint16_t rc_trim;
+	uint16_t rc_max;
+	uint16_t rc_dz;
+	uint16_t rc_assignment;
+	bool     rc_reverse;
+};
+
 /*
  * ORB tag for PWM outputs.
  */
@@ -216,6 +233,15 @@ ORB_DECLARE(output_pwm);
 /** force safety switch on (to enable use of safety switch) */
 #define PWM_SERVO_SET_FORCE_SAFETY_ON  _IOC(_PWM_SERVO_BASE, 26)
 
+/** set RC config for a channel. This takes a pointer to pwm_output_rc_config */
+#define PWM_SERVO_SET_RC_CONFIG  _IOC(_PWM_SERVO_BASE, 27)
+
+/** set the 'OVERRIDE OK' bit, which allows for RC control on FMU loss */
+#define PWM_SERVO_SET_OVERRIDE_OK	_IOC(_PWM_SERVO_BASE, 28)
+
+/** clear the 'OVERRIDE OK' bit, which allows for RC control on FMU loss */
+#define PWM_SERVO_CLEAR_OVERRIDE_OK	_IOC(_PWM_SERVO_BASE, 29)
+
 /*
  *
  *

src/drivers/px4io/px4io.cpp

@@ -2572,6 +2572,42 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg)
 
 		break;
 
+	case PWM_SERVO_SET_RC_CONFIG: {
+		/* enable setting of RC configuration without relying
+		   on param_get() 
+		*/
+		struct pwm_output_rc_config* config = (struct pwm_output_rc_config*)arg;
+		if (config->channel >= _max_actuators) {
+			/* fail with error */
+			return E2BIG;
+		}
+
+		/* copy values to registers in IO */
+		uint16_t regs[PX4IO_P_RC_CONFIG_STRIDE];
+		uint16_t offset = config->channel * PX4IO_P_RC_CONFIG_STRIDE;
+		regs[PX4IO_P_RC_CONFIG_MIN]        = config->rc_min;
+		regs[PX4IO_P_RC_CONFIG_CENTER]     = config->rc_trim;
+		regs[PX4IO_P_RC_CONFIG_MAX]        = config->rc_max;
+		regs[PX4IO_P_RC_CONFIG_DEADZONE]   = config->rc_dz;
+		regs[PX4IO_P_RC_CONFIG_ASSIGNMENT] = config->rc_assignment;
+		regs[PX4IO_P_RC_CONFIG_OPTIONS]    = PX4IO_P_RC_CONFIG_OPTIONS_ENABLED;
+		if (config->rc_reverse) {
+			regs[PX4IO_P_RC_CONFIG_OPTIONS] |= PX4IO_P_RC_CONFIG_OPTIONS_REVERSE;
+		}
+		ret = io_reg_set(PX4IO_PAGE_RC_CONFIG, offset, regs, PX4IO_P_RC_CONFIG_STRIDE);
+		break;
+	}
+
+	case PWM_SERVO_SET_OVERRIDE_OK:
+		/* set the 'OVERRIDE OK' bit */
+		ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK);
+		break;
+
+	case PWM_SERVO_CLEAR_OVERRIDE_OK:
+		/* clear the 'OVERRIDE OK' bit */
+		ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK, 0);
+		break;
+
 	default:
 		/* see if the parent class can make any use of it */
 		ret = CDev::ioctl(filep, cmd, arg);