Fixes for configs/z80sim/pashello Windows native build

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5420 42af7a65-404d-4744-a932-0658087f49c3

nuttx/arch/z80/src/z80/up_mem.h

@@ -33,8 +33,8 @@
  *
  ************************************************************************************/
 
-#ifndef nuttx.lnk__ARCH_Z80_SRC_COMMON_UP_MEM_H
-#define nuttx.lnk__ARCH_Z80_SRC_COMMON_UP_MEM_H
+#ifndef __ARCH_Z80_SRC_COMMON_UP_MEM_H
+#define __ARCH_Z80_SRC_COMMON_UP_MEM_H
 
 /************************************************************************************
  * Included Files
@@ -72,4 +72,4 @@
 
 extern const uint16_t g_heapbase;
 
-#endif  /* nuttx.lnk__ARCH_Z80_SRC_COMMON_UP_MEM_H */
+#endif  /* __ARCH_Z80_SRC_COMMON_UP_MEM_H */

nuttx/configs/z80sim/README.txt

@@ -25,10 +25,11 @@ Configuring NuttX
     This configuration performs a simple, minimal OS test using
     examples/ostest.  This can be configurated as follows:
 
+    1) From a POSIX window:
        cd tools
-       ./configure.sh z80sim/ostest
-       cd -
-       . ./setenv.sh
+       ./configure.sh z80sim/pashello
+    2) From a CMD.exe window
+       setenv.bat
 
     NOTES:
 
@@ -43,7 +44,7 @@ Configuring NuttX
 
     3. This configuration was last verified sucessfully prior to the
        the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
-       natively under Cygwin.
+       natively under Cygwin.  The current build requires ca. 3.2.1 SDCC.
 
   nsh
 
@@ -53,10 +54,11 @@ Configuring NuttX
 
     This configuration can be selected by:
 
+    1) From a POSIX window:
        cd tools
-       ./configure.sh z80sim/nsh
-       cd -
-       . ./setenv.sh
+       ./configure.sh z80sim/pashello
+    2) From a CMD.exe window
+       setenv.bat
 
     NOTES:
 
@@ -71,7 +73,7 @@ Configuring NuttX
 
     3. This configuration was last verified sucessfully prior to the
        the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
-       natively under Cygwin.
+       natively under Cygwin.nsh/defconfig:CONFIG_BOARD_LOOPSPERMSEC
 
   pashello
 
@@ -83,10 +85,11 @@ Configuring NuttX
 
     This configuration can be selected by:
 
+    1) From a POSIX window:
        cd tools
        ./configure.sh z80sim/pashello
-       cd -
-       . ./setenv.sh
+    2) From a CMD.exe window
+       setenv.bat
 
     NOTES:
 
@@ -101,7 +104,7 @@ Configuring NuttX
 
     3. This configuration was last verified sucessfully prior to the
        the configure to Kconfig/mconf tool using SDCC 2.6.0 built to run
-       natively under Cygwin.
+       natively under Cygwin.nsh/defconfig:CONFIG_BOARD_LOOPSPERMSEC
 
 Reconfiguring NuttX
 ^^^^^^^^^^^^^^^^^^^

nuttx/configs/z80sim/nsh/defconfig

@@ -62,7 +62,7 @@ CONFIG_WINDOWS_NATIVE=y
 CONFIG_ARCH_Z80=y
 CONFIG_ARCH="z80"
 CONFIG_ARCH_CHIP="z80"
-CONFIG_BOARD_LOOPSPERMSEC=
+CONFIG_BOARD_LOOPSPERMSEC=100
 CONFIG_ARCH_CHIP_Z80=y
 # CONFIG_ARCH_CHIP_Z8F6403 is not set
 # CONFIG_ARCH_CHIP_Z8F6423 is not set

nuttx/configs/z80sim/ostest/defconfig

@@ -62,7 +62,7 @@ CONFIG_WINDOWS_NATIVE=y
 CONFIG_ARCH_Z80=y
 CONFIG_ARCH="z80"
 CONFIG_ARCH_CHIP="z80"
-CONFIG_BOARD_LOOPSPERMSEC=
+CONFIG_BOARD_LOOPSPERMSEC=100
 CONFIG_ARCH_CHIP_Z80=y
 # CONFIG_ARCH_CHIP_Z8F6403 is not set
 # CONFIG_ARCH_CHIP_Z8F6423 is not set

nuttx/configs/z80sim/pashello/defconfig

@@ -62,7 +62,7 @@ CONFIG_WINDOWS_NATIVE=y
 CONFIG_ARCH_Z80=y
 CONFIG_ARCH="z80"
 CONFIG_ARCH_CHIP="z80"
-CONFIG_BOARD_LOOPSPERMSEC=
+CONFIG_BOARD_LOOPSPERMSEC=100
 CONFIG_ARCH_CHIP_Z80=y
 # CONFIG_ARCH_CHIP_Z8F6403 is not set
 # CONFIG_ARCH_CHIP_Z8F6423 is not set
@@ -142,7 +142,7 @@ CONFIG_DISABLE_PTHREAD=y
 CONFIG_DISABLE_SIGNALS=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
+# CONFIG_DISABLE_ENVIRON is not set
 CONFIG_DISABLE_POLL=y
 
 #